OMNI - Model OWC-5 - Waste Oil Chiller
From Waste Oil Equipment
5 Ton Air Chiller that cools 3000 sq. feet with the OMNI Patented Flame Control System and Ammonia Absorption Chiller Technology. Non Pro-Rated Warranty. International Voltage Available
-
Most popular related searches
Product Details
Efficient Ammonia Absorption Chiller Technology
Using your waste oil as a heat source, you can use this chiller in many applications. Efficient Ammonia Absorbtion can be used for air conditioning, cooling machinery, refrigeration and more.
High Grade Stainless Steel with galvaneel sheeted cabinets for long life in outside applications.
Patented, waste oil direct fired absorption Air Conditioner Design. We successfully adapted our waste oil burner technology to the time tested and proven gas fired air conditioner design. It's performance exceeded our engineers' expectations!
Easy Access
Lift out 3 large cabinet doors and removal of 2 securing nuts on swing out combustion chamber is all that is needed to allow easy access for occasional cleaning and service, when needed.
Dual Purpose Manifolds
When burning waste oil, timed airblasts self-clean the generator keeping ash deposit build up to a minimum, thus reducing required cleaning intervals. As a backup to waste oils, our manifolds will burn gas or propane to ensure constant cooling while performing routine cleaning.
Environmentally Sound
Join the conversion trend from conventional cooling systems - to the cost saving and environmentally safe ammonia absorption cooling process. Ammonia absorption has been a proven design since 1834. Some systems have been in operation more than 35 years without major service. Coupled with our many years of proven and advanced waste oil burning technology, makes this method of cooling a profitable choice for any waste oil generator.
Burning your waste oil on site is encouraged by the EPA, as cited in their ruling 266 of the CFR (Code of Federal Regulations). Millions of gallons of waste oil are unaccounted for every year. Our system is environmentally friendly and reduces contamination of our aquifer.
Ultimately, you will save a lot of money with this wise investment. Payback in 12-36 months depending on your cost of oil removal per gallon and existing air conditioning costs.
Simple direct fired technology
Chilled water allows:
Easy Installation
Multiple Zoning
Flexibility
No VAV controls needed
Multiductable
Fans can be used
No compressor or engine maintenance
Powered by clean, safe and abundant waste oil, gas or propane
Single phase power requirements opposed to 3-phase conventional A/C hook-up
Air cooled - no cooling towers needed
Low energy costs. Waste oil is FREE Demand costs will be cut by approximately 50%-70% due to greatly reduced electrical consumption
Eliminate ratchet charges
Investment Payback: 24-36 months on average.Thereafter A/C costs are approximately 50%-70% less forever
Inexpensive PVC chilled water piping installation to zones
Optional All Inclusive Equipment for Turn-Key Installation
- Chilled Water Type A-Coil
- Air Handler Exchanger
- Built In 3-Speed 3/4 HP
- Direct Drive Squirrel Cage
- Blower
- Insulated Cabinet
- Standard Water Pump
- Room Thermostat
- Water in/out Pressure
- Gauges
- Air Purge Vent
Customer reviews
No reviews were found for OMNI - Model OWC-5 - Waste Oil Chiller. Be the first to review!