PSE - Model SORAS-ST6 - UV Chamber for Preconditioning Test
From Photovoltaic Modules
In PV modules, many different components are exposed to the sunlight. Therefore, the IEC 61215 defines a UV preconditioning test (MQT 10) to test whether these components can withstand the UV radiation of the sun.
-
Most popular related searches
Product Details
In our test chamber, the UV radiation is up to five times the sun intensity to accelerate the test, as requested in the UV preconditioning test.
During the test, the module temperature is kept constant at 60°C in a special temperature chamber. We deliver our UV preconditioning chamber turnkey including the data acquisition unit, radiation and temperature sensors.
For waste heat disposal, the chamber is equipped with a water/air heat exchanger that can be connected to a cold water grid. This minimizes the heat load in the room were the chamber is installed.
Technical Specifications
- Test area2200 x 1260 mm
- Inhomogeneity of irradianceBetter 15%
- Intensity of lightMax 250 W/m²
- Doses for the tests15kWh for IEC 61215 and 60kWh for IEC 61730
- SensorsUVA, UVB and PT100
- ISO17025 (Optional)ISO17025 calibration certificate for the sensors
- Relevant standardsIEC 61215 MQT 10, IEC 61730 MST 54
Software Features
- Intuitive graphical user interface for remote control of the test stand
- Real-time visualization of UV radiation
- Display of the module temperatures
- Automatic switch of the test after the irradiation dose is reached
- Setting of calibration values
Customer reviews
No reviews were found for PSE - Model SORAS-ST6 - UV Chamber for Preconditioning Test. Be the first to review!