Sierra MultiTrak™ - Model 670S - Multi-Point Gas Mass Flow Meters for Large Ducts and Stacks
The 670S dynamically compensates for changes in the flow profile by using up to four independent mass flow sensing points to measure the instantaneous average gas mass flow velocity. The 670S is commonly used in petrochemical refining, coal-fired electric power generation, steel manufacturing and many other industrial processes that face the challenge of accurate and repeatable gas mass flow measurement in very large pipes or ducts.
Product Overview:
Sierra's MultiTrak 670S is an advanced state-of-the-art thermal mass flow meter system for measuring mass flow rates in very large ducts or stacks that have:
- Non-uniform velocity profiles
- High turn-down requirements
- Dirty gas streams
- Wide temperature ranges
- Fast velocity and temperature changes
Operating Principle: Thermal dispersion technology provides direct mass flow measurement featuring no pressure or temperature compensation needed, no moving parts, low pressure drop and high turndown.
Product Benefits:
- Excellent choice for acurately measuring mass flow rate in large pipes or ducts
- State-of-the-art ISO 9001 calibration facility to assure best system accuracy
- 670S system consists of:
- Up to four sensing points linked via Modbus
- One control box with touch-screen HMI
- 4 to 20 mA output module with the associated cables (power, 4 to 20 mA output cable for daisy-chaining all sensing points)
- Features our patented no-drift DrySense velocity sensor: Watch video...
- Lifetime warranty on sensor
- Greenhouse Gas (GHG) certified to meet EPA (40 CFR Part 98)
- User-friendly microprocessor-based Human Machine Interface (HMI) controls all functions of system
- Touch screen HMI used to collect, visualize and store flow data, as well as set up the individual sensor points
- Entire system to be easily configured in the field
- HMI integrates the following functions:
- Mass flow rate and totalized flow
- Flow-range adjustment
- Field validation and diagnostics
- Configuration and setup
- HMI offers advances over industry-standard collector boxes allows users to:
- Average the flow of 4 meters
- Convert flow units
- Set up the density of the gas for mass flow measurement
- Configure the individual sensor points
- Set up alarms
- Each point is a small-diameter, 3/4 inch (19.1 mm) sensor probe
- Pipe sizes up to 72' (2M)
- Range of process connections (including hot tap)
- Low pressure hot taps available
- Very low pressure drop
- No moving parts
- High temperature option to 750ºF (400ºC) available
- Flow-range adjustment and validation and diagnostics
- Dual-range capability
- Field validation/configuration to ensure operating performance
- Field rangeability
- Flow totalizer and alarms
- Free computer interface software
- Digital communications: Foundation Fieldbus, HART, Modbus RTU, Profibus DP
Features:
- Compensates for flow profile changes with up to 4 sensor points
- Exceeds in applications with non-uniform flow profiles, low pressure drop, high turndown
- Eliminate drift with patented DrySense sensor
- Manage multiple inputs with easy-to-use touchscreen HMI display interface
- Backed by lifetime sensor warranty
Specifications
- Accuracy: +/- 1.0% of reading plus +/- 0.5% of full scale
- Repeatability: +/- 0.2% of full scale
- Measure all inert gases and all non-condensing clean gases
- Flammable gases: methane, propane, hydrogen, digester gas, natural gas
- Corrosive gases compatible with 316L stainless steel
- 100:1 Turndown
- Gas Temperature -40°F (-40°C) to 350°F (200°C)
- High temperature (HT) option to 750°F (400°C)
- Ambient Temperature -40° F to 120° F (-40° C to 50° C)
- Response time is one second to achieve 63% of final value
- Power supply 18 to 30 VDC (regulated), 625 mA maximum; 100 to 240 VAC, 50/60 Hz, 15 watts maximum
- 316 stainless steel construction
- Output Signals: RS-232, 0 to 5 VDC, 0 to 10 VDC, 4 to 20 mA
- User definable pulse output for totalized flow
- Digital communications: Foundation Fieldbus, HART, Modbus RTU, and Profibus DP
- Hazardous-Area Location Enclosure (IP66) and NEMA 4X (IP65)
- Approvals:
- FM (USA) Class I, Div I, Groups B,C,D
- CSA and CRN (Canada)
- ATEX
- CE
- PED (EU)
- GOST R (Russian Federation)
- Chinese Pattern Approval (China)
Performance Specifications:
- Accuracy of Point Velocity : +/- 1% of reading + 0.5% of full scale
- Repeatability : +/- 0.2% of full scale
- Temperature Coefficient
- +/- 0.02% of reading per °F within +/- 50° F of customer specified conditions
- +/- 0.03% of reading per °F within +/- 50° F to 100° F of customer specified conditions
- +/- 0.04% of reading per °C within +/- 25° C of customer specified conditions
- +/- 0.06% of reading per °C within +/- 25° C to 50° C of customer specified conditions
- Pressure Coefficient : .02% per psi for air, consult factory for other gases
- Response Time : One second to 63% of fi nal velocity value
Operating Specifications
Gases
Most gases compatible with 316 L stainless steel
Hastalloy available
Gas Pressure
Mechanical design pressure:
Compression fittings: 500 psig (34 barg)
1-inch 150 lb flange (-40° to 250° F): 185 psig (12.8 barg)
Low Pressure Hot Tap: 150 psig (10 barg)
High Pressure Hot Tap: 1000 psig (70 barg)
Pressure Drop
Negligible for pipes three inches in diameter or larger
Gas & Ambient Temperature
Gas . . . . . . . . . . . . . . -40° F to 350° F (-40° C to 177° C) Gas dependent.
Ambient . . . . . . . . . . -40° F to 120° F (-40° C to 50° C)
Optional: Up to 750° F (400° C) air only; consult factory for other gases
Leak Integrity
5 x 10-9 cc/sec of helium maximum
Power Requirements
18 to 30 VDC (regulated), 825 mA per point
The HMI includes probe power supplies
Note that only DC powered 640S meters can be used with the multipoint
Output
Linear 4-20 mA proportional to grand-average flow signal
Physical Specifications:
- Wetted Materials : 316L stainless steel
- Enclosure:
- Hazardous-Area Location Enclosure (IP66) or NEMA 4X (IP65)
- Both are powder-coated cast aluminum
- Electrical Connections
- Two 3/4 inch NPT: Hazardous-Area Location Enclosure (IP66)
- One 1/2 inch NPT: NEMA 4X Enclosure (IP65)
- Mounting (optional)
- ANSI 1-inch 150 lb flange
- 3/4-inch tube compression fitting with 1-inch male NPT
- Hot tap systems
- Certifications
- CE (All enclosures)
- CSA (Explosion proof for Class I, Division 1, Groups B, C, D)
- ATEX ( II 2 GD Ex d IIC T6 ... T2; IP 66 T70 °C ... T280 °C )
- FM (Explosion proof for Class I, Division 1, Groups B, C, D; dust-ignition proof for Class II, III, Division 1, Groups E, F, G)
- IP65, NEMA 4X T6 -40° C to 70° C ambient
- Chinese pattern approval
- GOST R/RTN (1ExdIICT6...T2)
Customer reviews
No reviews were found for Sierra MultiTrak™ - Model 670S - Multi-Point Gas Mass Flow Meters for Large Ducts and Stacks. Be the first to review!