SkimOil - Model TBS - Belt Skimmer
From Different Types of Oil Skimmers
Belt skimmers lift and remove unwanted floating oils from the surface of water or coolants, in parts washers, pressure spray operations, oil leakage pits, wastewater, and treatment tanks, pits, sumps and wells. These require no pumps. These are selective and give you almost oil only with very little water to deal with. The Belt skimmers (TBS) are workhorses for smaller oil skimming needs and give you oil recovery rated in GPH or gallons per hour . TBS can be plugged into a timer and/or can be run unattended around the clock. These are almost Idiot or Bubba Proof.
-
Most popular related searches
Products Details
The belt skimmers are selective skimmers — motor driven and work by attracting oil to the surface of the belt — which then is rotated/driven around to the point where the scraper blade shaves or scrapes the oil off the belt — allowing it to gravity drain into your sump or tank or bucket or tote or ?
The belt skimmer (TBS) has to be mounted over the area where oil collects so it can reach down thru the surface and attract the oil. The oil has to touch the belt to work. Most plants have the ability and skilled people that allow them to provide some sort of arm or flange or ?? to clamp or bolt the skimmer onto.
See the optional adjustable mounting stand .
In the world of oil skimming — The Belt Skimmers are probably the most bullet proof and easiest to walk away from and not worry about. The only moving part is the motor driven pulley and the belt that rides on it. It’s drop dead reliable and a very mature technology. It’s hard to screw this one up!
MOTOR SPECIFICATIONS:
- 30 RPM Permanent magnet synchronous motors – the highest level of reliability
- Amp draw 0.055 (7 watts)
- Gears and extruded pinion conform to AGMA7 level quality.
- 115V/1/60Hz is standard (220/1/50 and 220/1/60 also available)
- 64 oz.-in of torque
The TBS2 Series is a modern design made to address the ever increasing needs for WASTEWATER APPLICATIONS. It is priced to be affordable, is lightweight, portable and corrosion-proof! Polyurethane or stainless steel belts can reach from a few inches to 20 feet down. The TBS2 accepts 2' & 4' wide belts. A timer, ground-fault interrupter, 3 ft. extension hose and handle are included with standard products. Custom units with a 'steep trough' side discharge for heavy oils are available as are units for 2' and larger monitor wells.
MOTOR SPECIFICATIONS:
- 30 RPM Permanent magnet synchronous motors – the highest level of reliability
- Amp draw 0.055 (7 watts)
- Gears and extruded pinion conform to AGMA7 level quality.
- 115V/1/60Hz is standard (220/1/50 and 220/1/60 also available)
- 64 oz.-in of torque
FRAME: Stainless steel metal, UHMW polymer ends/scraper blade. PULLEY: Nylon drive pulley. SS/nylon tail pulley with SS retainer chain. TEMP 120 F. with poly belt, 200 F. with stainless steel belt. WEIGHT: Ship weight varies from 15 - 30 lbs. depending on options that you choose. All metal is stainless steel and is corrosion-resistant. Collects 1-6 GPH depending on belt width and conditions. >>>Click Here For TBS2 Brochure
Benefits
- Economical Cost and Dependable Operation
- No Corrosion - All Stainless and Polymer Materials
- Std. Belt Lengths to 10 ft. - Can be made to 100 ft. down
- Handles Fluctuating Liquid Levels
- Takes Little Space & Easy to Install
- Furnished as a Complete System with Accessories
Features
- Uses 4' Wide Belts - Polyurethane or Stainless, Uses One to Four Belts,
- Baldor Permanent Magnet Gearmotor, UHMW Bearing-Grade Polymer Scraper Blade.
- Collect 2 –25 Gallons/Hour from 2 ft. to 100 ft. depths!
Customer reviews
No reviews were found for SkimOil - Model TBS - Belt Skimmer. Be the first to review!