SOLARFOCUS - Model CPC - Solar Collector
From Solar Energy Systems
Take advantage of sunlight with a SOLARFOCUS CPC solar panel collector. Transform the sun’s rays into free heat for your premises to reduce your energy costs and impact on the environment. Our solar CPC collectors can be used all year round and are especially effective in the spring and autumn, when the sun’s rays fall at a low angle.
-
Most popular related searches
The Cpc Collector – Not Just For The Summer
- Perfect exploitation of light at a low incident angle
- No condensation means no wet insulation in the collector; 10-year guarantee
- No condensation means no film of dirt on high selective coating of absorber
- Large format: 2,400 x 1,155 x 65 mm, aperture area 2.5 m²
- For vertical or horizontal installation
Technology And Benefits
Save Money & Energy with Solar CPC Collectors
Different sizes of CPC solar collector are available to suit all applications. A system lifetime of 25 years and the ability to supply at least 70% of domestic hot water requirements makes solar CPC collectors an investment in the future of your home and the environment.
To find out more, please contact your local SOLARFOCUS representative.
No ventilation holes - no plastics - no wood - no insulation - no rubber seals
Why the structure of the collector should be important to you: because environmental influences such as wind, rain, dirt, UV radiation, snow loads and extreme variations in temperature are active on the collector over a period of decades.
- The 1.5 mm leak-proof welded aluminium tank without vent holes forms the “foundation”.
- Air and waterproof design without air holes and rivets protect the interior of your collector for decades.
- High-selective coated copper absorber with ultrasonic welded heat transfer medium pipe.
- The floating absorber which is coated on both sides guarantees you the best energy yield.
- The cylindrical, high-gloss rolled, galvanically anodized pure aluminium reflector concentrates the penetrating solar radiation onto the vertically
installed absorber ship. - The reflectors are protected in the casing from environmental influences, which guarantees a long service life.
- 4 mm low-iron, prism-structured solar safety glass.
- Highest light transmission, impact and hail resistant.
- Flexible, UV protected special seal.
- Connects the tray, the glass and the glass strip.
Diffusion proof.
Prevents the penetration of moisture and contaminants.
- Anodized special aluminium section.
- No rubber seal, but a UV and weather-resistant aluminium strip provides protection for the glass edges.
Guarantees permanent adhesion between the glass and the tray.
- 1/2” external thread with flat-faced gasket.
- The surface seals contacting the interior and exterior side of the tray are screwed in plane-parallel with brass nuts and hermetically seal the tray.
- No environmentally vulnerable rubber or plastic seals.
- Allows simple connection of the collectors.
- Negative pressure relief valve for pressure compensation. The air expands at the first warm-up of the interior of the collector - and excess pressure develops. The valve opens and the air can escape. When the air cools, the valve closes and a vacuum develops in the interior of the collector.
- The reflectors support the glass (0,1 bar = 1.000 kg/m2).
- No corrosion of the interior of the collector due to aggressive outside air.
No exchange between interior and exterior air - therefore no heat losses due to convection.
No condensation, therefore no degradation of the high-selective absorber coating.
- The ring-groove ventilation is located on the collector’s distribution pipe.
- The ring-groove ventilation makes it easy to ventilate solar collectors connected in series.
Customer reviews
No reviews were found for SOLARFOCUS - Model CPC - Solar Collector. Be the first to review!