Syncraft - Model CW1800-500 - Wood Gas Power Plants
SYNCRAFT is your professional partner for wood-gas power plants. The table below shows the technical data of the SYNCRAFT® wood-gas power plant CW1800-500.
-
Most popular related searches
Technical Specifications
- thermal input capacity 1754 kW
- Electrical power 500 kW
- Thermal power (basic variant) 770 kW
- Thermal power (basic variant) up to2 1153 kW
- Fuel demand 342 kg/h
- Specific fuel demand 0,68 kg/kWh el
- Charcoal by-product 4,7 m3/d
- Space required by gas generator ca. 120 m2
- Space required by engine ca. 55 m2
- Space required for bunker (week’s supply) 418 m3
- Fuel quality G30 - G50, optimal < W10, mit Feinanteil und Rinde
Heat
Heat may be a by-product of our biomass power plant plants, but it is the largest item in terms of energy produced. The SYNCRAFT® plants produce around 0.5 kW of thermal output per 1 kW of fuel power. This useful heat can be gathered and made available at a temperature level of around 95°C. If required, however, the useful heat stream can also be divided into two, with one half going to a low-temperature stream with an inlet temperature of 80°C, and the other going to a hightemperature stream with an inlet temperature of up to 200°C. Heat use is an important economic factor in the operation of the SYNCRAFT®Werke.
Electricity
Electricity is the core product of each SYNCRAFT® biomass power plant plant. Our SYNCRAFT®Werke produce practically 0.3 kW of electricity per 1 kW of fuel power, making the electrical efficiency of SYNCRAFT®’s wood-gas plants one of the highest in the entire bio-energy sector, especially when you consider that absolutely no additional fuels (such as pilot oil or similar) are used in our gas engines in the production of electricity. What is more, despite the high degree of efficiency, the emission values in all areas are significantly lower than the current emission limits. A standard oxidation catalytic converter is all that is required for exhaust after-treatment.
Charcoal
Premium quality charcoal is the third valuable product of each SYNCRAFT® wood-gas plant. In economic terms, our plants generate revenue where a cost would normally be expected. This underlines the financial benefit of operating a SYNCRAFT® wood-gas plant. From an ecological perspective, the obtained solid matter can be entirely used as soil conditioner for vegetation, thus sustainably closing the cycle of materials. Active charcoal does not directly fertilise the soil; it rather assists the long-term retention of fertiliser materials, permitting fertiliser use to be minimised to sustainable levels. Ready-for-sale bigbags or containers can as necessary be filled with moistened, dust-free biochar at the plant.
Customer reviews
No reviews were found for Syncraft - Model CW1800-500 - Wood Gas Power Plants. Be the first to review!