Thermal Oil Heaters
SUGIMAT thermal oil heaters are designed to work with fossil fuels (gas, diesel and fuel-oil), with biomass or with non-conventional fuels. They adapt completely to the client's needs and reduce the payback time.
-
Most popular related searches
This type of heaters have many advantages with res...
This type of heaters have many advantages with respect to steam conventional equipment. Firstly, thermal oil requires no specific treatment and it helps obtaining an ouput higher than 85% for biomass boilers or higher than 90% for fossil fuel boilers.
Secondly, thermal oil heaters do not require heater rooms nor heater operator, thus the costs are considerably reduced. Also, oil works also as a lubricant fluid and prevents installation from corrosion, therefore no maintenance is needed.
Thirdly, another great advantage of thermal oil installations is that they work at low pressure, which increases safety and reduces the risks for high pressure.
TECHNICAL DATA
- Types of fuel: fossils, biomass and non-conventional fuel
- Capacity: up to 50MW
- Design: coils
- Maximum working temperature: up to 395 ºC in HTF
- Layout: vertical/horizontal
BASIC FEATURES
- Heaters with one or three fumes passes
- Series coil connection without mixing temperatures: it allows for an accurate control of the thermal oil flow inside the heater
- Header cooled by the fluid itself: it prevents the need if refractory material. Thus, a minimum maintenance of the parts subject to radiation inside the heater is guaranteed. This type of header also prevents, in case of a pump stoppage, the oil inside the heater from degrading when receiving an additional energy input coming from the refractory mass.
CONSTRUCTIVE METHODS
According to Design Code AD-2000 Merkblatt
- Coils welding:
- Arc welding with tungsten electrode and inert gas (UNE-EN ISO 4063:2011) (141)
- Metallic materials arc Welding with basic-type coated electrode (UNE-EN ISO 4063) (111)
- Base material and filler material according to EN 10204:2004/3.1
- Non-destructive tests (NDT) according to AD-2000 Merkblatt HP 5/3 AP1.
- Certification of welding procedure qualification according to UNE EN 288, AD-2000 HP 2/1 y HP 5/2.
- Welders qualification according to UNE EN ISO 287 and AD-2000 HP3.
- Quality Assurance System ISO 9001:2008, Certification number 12 100 42980 TMS
- Certified by TÜV SÜD Management Service, Certification Code QMS-TGA-ZM-07-92.
- Certification Pressure Equipment Directive D-97/23/CE, Anex III, Module H with Certification number DGR-0036-QS-984-14.
- Certified by TÜV SÜD Industrial Service Gmbh, Notified Body Nº36.
According to Design Code ASME VIII Y ASME I
- Coils welding:
- GTAW, Gas Tungsten Arc Welding, according to ASME IX.
- SMAW, Shielded Metal-Arc Welding, according to ASME IX.
- Welding Procedures according to ASME IX.
- Certified welders according to ASME IX.
- Base material and filler material according to ASME II.
- Non-destructive tests (NDT) according to ASME V.
- ASME S Stamp, for manufacturer and assembly of power Boiler, Certificate Nº: 45,801.
- ASME U Stamp, for Manufacturer of pressure Vessel, Certificate Nº: 45,802.
Customer reviews
No reviews were found for Thermal Oil Heaters. Be the first to review!