TORRIX Standard - Fuel Level Sensors
From Magnetostrictive Level Sensor
TORRIX is ideally suited for measuring in all non-adhesive liquids and almost all tank geometries. There is no need to adjust the sensor to the liquid or the shape of the tank. Another advantage is that there are no dead zones in the upper and lower areas. The starting point of the measurement is only defined by the size of the float; therefore the entire volume can be measured and used.
Maximum length: 6,000 mm
- Maximum length: 6,000 mm
- Info All standard fittings and flanges available
- Info Process temperature up to 450 °C.
- Info Process pressure up to 200 bar
- Info SIL 2 (in use and proven)
- Info ATEX and IECEx approval for use in Zone 0
Applications
Installed and tested in the following industries:
Chemical, petrochemical, liquid gas, pharmaceutical, laboratory, off-shore, ship building, power plants, energy systems, mechanical engineering, process and drinking water treatment.
Just get started:
Easy to install and easy to use. TORRIX saves your time and even if you have a challenging application, troubleshooting is very easy. The sensor can even be dry tested without liquids before installation.
Use for toxic liquid:
Even in a toxic liquids the TORRIX is a safe solution to use. In contrast to other technologies (i.e. guided microwave sensor technology), no electrical insulating sealing is needed, so the sensor can be welded directly to the flange forming a permanently tight seal throughout its lifetime.
Versatile
Various fields of applications: Applications examples Info
Highly reliable:
The TORRIX always delivers excellent results, even in environments where process conditions or liquids are changing.
The solution for interface layer measurement:
Equipped with two floats, the sensors measures both the filling and the interface layer very precisely, even when an emulsion layer is present at the interface.
A solution for the most difficult installation conditions:
Due to the small sensor head and a small tube diameter of only 6 mm, the TORRIX can be installed almost anywhere.
TORRIX level sensor in brief
- Info Easy to install and to configure
- Info Absolutely maintenance-free
- InfoMeasurement of the separation layer and the filling level via HART®
- Info Temperature-compensated measuring principle
- Info2-wire terminal (4 to 20 mA)
- InfoRobust long life design
- InfoResistant to shock
- and vibration (OIML D11)
- InfoMeasuring range freely configurable along the entire probe length
- InfoUse in Ex zone 0 (ATEX approval)
Customer reviews
No reviews were found for TORRIX Standard - Fuel Level Sensors. Be the first to review!