Vitrovex - Battery Module
From Application Housings
High-Performance rechargeable Li-Ion PowerPack® installed in a VITROVEX® 13” glass sphere for full ocean depth.
Description
Scope of supply
- Pressure housing: VITROVEX 13” instrument sphere, 7.000m or 12.000m depth rating
- Battery: High-Performance Li-Ion rechargeable PowerPack with “SubConn®” BH6F power output port inclusive dummy plug and DLSBM and DLSBF
- Battery charger: Automatic high-power Li-Ion battery charger with micro-controller and “SubConn®” BH5M charge port incl. dummy plug and DLSBM and DLSBF
- Options
- BMS: Battery Management System (voltages, current, temperature, SOC, diagnostic) with data acquisition and interface, incl. 24 Bit high-res data acquisition, RS-232 or RS-485 interface (other on request) and configurable NMEA-0183 (simple ASCII) data protocol.
- Connection and communication with Battery Module by “SubConn®” BH10F management port inclusive dummy plug and DLSBM and DLSBF
- Remote On/Off: To switch Battery Module or just BMS electronic on or off. Low-resistance and low-power dissipation for best performance.
- High-current output: 20A or 30A, High current is for peak or short time only. Current must be limited between 10A to 20A max. continuously.
- OceanView®: configuration software for BMS
- Recommended temperature conditions Operating -20°C to +60°C
- Charging +10°C to +45°C
- Storage -20°C to +50°C
Additional Information
The arrangement of batteries can be in three layers with three different configurations each.
- Weight in air: 15kg / 25.5kg / 31.5kg
- Weight of Batteries: 6,5kg / 17kg / 23.5kg
- Rated Voltage: 14.4V / 25.2V / 50.2V
- Rated Capacity: 27Ah to 365 Ah
- Rated Power: 1350 Wh to 5258 Wh
Customer reviews
No reviews were found for Vitrovex - Battery Module. Be the first to review!