VPInstruments - Model VP - Dew Point Sensor
From Dew Point Sensors
Prevent high maintenance costs by monitoring and maintaining the right dew point in your system. Too much water in your system can lead to e.g. forming of rust, freezing of valves, and even product loss when the moist content is too high for your coating or paint process. Stay in control of your dew point with the VP Dew Point Sensor.
-
Most popular related searches
Product Details
The VP Dew Point Sensor is the smart dew point transmitter with a large measurement range of -70..+60 °C, so you can measure downstream a refrigerant type dryer as well as a desiccant-type dryer. The sensor has multiple outputs for easy connection to any management system. The alarm LED shows a critical dew point level right on the factory floor and the VP Dew Point Sensor has a built-in autocalibration for high accurate readings.
Features and Benefits
- Built-in alarm function and LED
- Sensor highly resistant to condensation and particulate contamination
- RS485 (Modbus RTU) and 4..20 mA output
- Auto-calibration
- Optional display
- Optional sample block with bleed valve
Applications
- Monitoring of refrigerant and desiccant-type air dryers
- Sizing of dryers
- Permanent measurement
- Guarding of critical process e.g. in semiconductor and automotive industry
VP Dew Point Sensor Start Kit
The VP Dew Point Sensor is available in a complete start kit. The start kit contains:
- VP Dew Point Sensor
- Sampling block
- Cable 10m / 32.8ft
- Quick connector
- 1/4″ Male connector
- Leak screw with sound muffler
- Calibration certificate
Additional Information
Sampling block
Create the optimum gas flow over de sensor for stable and continuous accurate measurements.
External Display 420
Monitor your dew point locally with the External Display 420. The display has a built-in alarm relay, which can be used to trigger an external alarm, for example via your BMS/ SCADA system.
Specifications
- Dew point range: -70 … +60° C | -94 … 140° F dew point
- Temperature: -40 … +60° C | -40 … 140° F
- Humidity: 0 … 100% RH
- Pressure: 0..50bara | 725 psia
- Output: 4 … 20 mA and RS485 (Modbus RTU)
- Sensor: This film polymer
- IP: IP66 | NEMA 4
Customer reviews
No reviews were found for VPInstruments - Model VP - Dew Point Sensor. Be the first to review!