Zhengzhou Shuliy Machinery Co., Ltd - Model SLIII-1 - Sawdust Briquette machine
-
Most popular related searches
Sawdust briquette machine
The biomass rod machine can polish the forest waste and crop waste containing wood fiber. The superheat forming is made into a combustible mechanism rod. Compared with other domestic counterparts, the machine has added a forced feeder; the electronic control devices all use high-grade Delixi electrical components, motor integrated protector, overload protector, leakage protector; and equipped with automatic cutter . Charcoal machine, dryer structure; dryer is composed of 20 elbows of different sizes. The total length is about 30 meters, and the total assembly length is 16 meters. If you go through the inspection, choosing equipment is a crucial step. The principle and process of the equipment are basically the same. But the production of the equipment is very different. The principle of the dryer; taking the dryer as an example: the raw materials before drying should be dried to reduce the water content to between 12% and 4%. This requires that the length of the pipe, the diameter of the pipe, the insulation performance of the pipe, the air volume of the fan, the wind pressure, and the flow rate are all suitable for the raw material drying requirements. The dryer should be able to dry the raw material with a moisture content of 35% at a time. Some dryers are not suitable for drying due to pipe length, wind pressure and air flow. Therefore, the raw materials can be dried 3-4 times, which not only wastes manpower, material resources, electricity, and fuel, but also greatly increases the cost of carbon production, and greatly affects the next process - the rod. The dryer of our factory can reach 95% water content once. Mechanism charcoal rod machine, which can use sawdust, crop straw, branches, rice husk, bamboo chips, peanut shell, sunflower seed shell, furfural residue, cotton rod, sesame rod, corn stalk, corn cob and various shrubs After the raw material is pulverized, it is compressed into a high-density, high-calorific value molding fuel by mechanical pressing and heating. No need to add any adhesives and chemicals, the density of raw materials is generally about 130KG/m3, and the density of the salary bar after extrusion molding is 1100-1400 KG/m3, and the volume is reduced to one tenth of the original. The performance is greatly improved. It can replace the salary bar and coal as production and living, and improve the thermal efficiency by 30%-40%. After de-cigarization and carbonization, it is a silver-black hollow four-corner or hexagonal column rod with a shiny cross section.Sawdust briquette machine