Cooling Towers Applications
-
Heat recovery from industrial processes
The Organic Rankine Cycle, for its intrinsical characteristics – first of all, the low temperature required for operation – is optimally suited to be used as the basis for heat recovery systems, designed to turn uselessly wasted heat into a valuable ...
By Zuccato Energia Srl based in Verona, ITALY.
-
Heat transfer products solutions for the power generation industry
Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid ...
By Evapco Inc. based in Westminster, MARYLAND (USA).
-
UV Light Systemst for Power
Protect boiler feed make-up water from bacterial growth and associated biofouling; extend micron filter and RO membrane life; improve heat exchanger performance; and improve permeate quality and quantity with HOD UV for non-chemical disinfection and dechlorination. ...
By Atlantium Technologies based in , ISRAEL.
-
Water treatment solutions for power generation industry
Many applications within the power generation industry, particularly those involving steam generation, are highly dependent on optimal water quality to improve the efficiency and longevity of critical components such as boilers, steam turbines, and cooling towers and related systems. Effective water treatment strategies mitigate challenges like scaling, corrosion, and fouling, resulting in reduced operational costs and minimized environmental impact. Our consultants are qualified to support the various subsets ...
By Arthur Freedman Associates, Inc. (AFA) based in Dyer, INDIANA (USA).
-
Overcoming water treatment challenges in the power generation industry
Those in the power generation industry know how critical a reliable, steady stream of high purity water is. For power generation, water is used in high pressure boilers, turbines and cooling towers. Water treatment for power generation is a vital process that requires a dependable technology. High purity water ensures proper operation of steam generation system and reduces blowdown frequency and use of boiler chemicals. High purity water is also able to better protect against erosion and damage to equipment. ...
By Desalitech - a DuPont brand based in Newton, MASSACHUSETTS (USA).
-
Heat transfer products solutions for the industrial process sector
EVAPCO’s towers, condensers, and closed circuit coolers offer competitive solutions for needs at all stages of manufacturing in any ...
By Evapco Inc. based in Westminster, MARYLAND (USA).
-
Heat Exchangers for Energy and Environmental Technology
The responsible care for the environment and the availability of energy resources are increasingly taking centre stage. We are planning for this, and exceed your requirements in respect to heat exchange in the fields of energy and heating, and of power stations and environmental ...
By APL Apparatebau GmbH based in Hopfgarten, AUSTRIA.
-
PVT Solar Panel for Local Heating network
The deZONNET heat network is a local heat network for new construction and the transformation of existing gas-fired to fossil free neighborhoods. All houses have Triple Solar PVT solar panels on their roof and supply electricity and source heat to a heat pump. There is heat left over in the summer: this heat is dissipated via a heat network and stored in the soil in the ATES (Heat Cold Storage). In the winter, when the PVT heat pump panels do not provide sufficient heat for the heat pump, the stored heat is ...
By Triple Solar BV based in Amsterdam, NETHERLANDS.
-
Shell and Tube Heat Exchanger and Pressure Vessel for Nuclear Power
Joseph Oat Corporation is the oldest continuously operating industrial fabrication business in the United States and has possessed the ASME Section III Nuclear “N” Stamp for Class 1, 2 and 3 equipment for almost fifty years. Since 1966, Joseph Oat Corporation has designed and fabricated safety related shell and tube heat exchangers, pressure vessels and specialty weldments to the majority of domestic nuclear power stations and many other plants throughout the world. More recently, Joseph Oat has ...
By Joseph Oat Corporation based in Camden, NEW JERSEY (USA).
-
Heat Pumps for Commercial Building Industry
The U.S. Department of Energy estimates that commercial buildings account for 826 million metric tons of CO2 emissions annually. Additionally, the average energy consumption of a commercial building in the U.S. is 22.5 kilowatt-hours per square foot. Energy is wasted in many ways—from heating, cooling, and lighting to ventilation, hot water heating, and more. The inefficiencies with traditional boilers and chillers have created a dire need for a more robust solution, one that addresses high energy ...
By Dalrada Climate Technology (DCT), a subsidiary of Dalrada (DFCO) based in Escondido, CALIFORNIA (USA).
-
Thermal energy storage systems for district heating & cooling
It is always more efficient to produce energy in a concentrated place, like district heating and cooling systems.In case of the district heating systems a thermal energy storage is essential. The well-known solution is the water storage. However, it requires a lot of space.The number of district cooling systems (DCS) is rapidly increasing but they have many technical challenges: peak load management, lack of space, plant size optimization and security of ...
By HeatVentors based in Mezőtúr, HUNGARY.
-
Professional Ozone Applications
High concentration ozonated water is a natural oxidant that kills pathogens quickly and ...
By Biotek Environmental Science Ltd. based in , TAIWAN.
-
Heat Transfer Solution for Power Generation
At API Schmidt-Bretten, we know the key to successful power generation is efficiency. That’s why we provide a broad range of custom and standard heat transfer solutions for both renewable and nonrenewable energy applications that can help you minimize downtime and get the most out of your production ...
By API Schmidt-Bretten GmbH & Co. KG based in Bretten, GERMANY.
-
Renewable energy solutions for the saving energy industry
Frequency inverter reconstruction of Power Plant promoted heightening of economy benefit. Frequency inverter won acceptance of user as its high reliability, flexible adjustment and simple operation. A Power Plant was set up in June, 2000. Its predecessor was one of key plants of state. The plant put into service in 1957. Now it has 4×50MW, 2×142MW, total ten boilers and six generators. Total capacity is 484MW. The plant supplies power to big enterprise near to ...
By Shenzhen Veikong Electric Co.,Ltd based in Shenzhen, CHINA.
-
Thermal energy storage systems for data centers & telecommunication sector
Data centers/telecommunication sites need to be cooled 24/7. They optimally operate at 24-28 ⁰C. They are cooled similarly to industrial air conditioning using electrical energy. Unfortunately, the system is the least energy efficient when the temperature difference is the highest (i.e. the outside temperature is too high). However, at night, when the temperature is low outside, the cooling system is more efficient or not even needed. Also in case of a blackout the cooling systems need 4-6 minutes to ...
By HeatVentors based in Mezőtúr, HUNGARY.
-
Thermal energy storage systems for commercial buildings sector
There are many problems concerning cooling systems. Cooling systems work with changing efficiency during a day. There are growing cooling needs due to the increasing outside temperature. Electricity prices will increase because the artificial price is not sustainable anymore. The systems are oversized, they work with bad (low, weak - ezek jobban néznének ki, nem tudom, hogy szakmailag megállja-e a helyét valamelyik) efficiency far from the design point and they turn on and off quite ...
By HeatVentors based in Mezőtúr, HUNGARY.
-
Organic Rankine Cycle (ORC) Systems for Geothermal
The ORC technology is particularly suitable for the exploitation of medium-to-low enthalpy sources. It is a cost-effective solution with power outputs reaching up to 40 MWe per single generator for sources with water temperature from 100°C to 200°C or ...
By Turboden S.p.A based in Brescia, ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you