NOx Control Applications
-
Premium
Reciprocating Engine Generators Application Note
Reciprocating Engine Generators are a trusted method of providing reliable electric power for small-to medium-scale operations.Driven by the benefits of lower costs and risks, gas-powered reciprocating engines are increasingly being used in place of combined-cycle gas turbine power plants.While the reciprocating engines deliver greater flexibility, especially with regards to the use of renewable fuels such as biogas, they still require precise gas monitoring to ensure emissions limits are met.AMETEK Land’s ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Power generation solutions for food and beverage industry
Solar Turbines provides energy solutions with our gas turbines for power generation, and has extensive experience in the food and beverage industry. Our cogeneration products will increase reliability, efficiency and uptime, avoiding production downtime for your brewery, distillery or food processing plant. With the purchase of our products, Solar offers lifecycle support with one of our Long-Term Service options. Using our combined heat and power technology, Solar can help produce steam for your operations and ...
By Solar Turbines Incorporated based in San Diego, CALIFORNIA (USA).
-
Premium
Electronic fuel control valves solutions for oil and gas industry
Continental Controls provides services and products for the midstream and upstream oil and gas markets. CCC products can be on anything from a small GM engine burning field gas at a wellhead in New Mexico, to a GE LM-2500 gas turbine, pumping gas from offshore platforms to Pemex gas pipelines in southern ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Combustion Technology for Alternative Combustibles
Hydrogen is the fuel gas with the highest burning rate and flame temperature and was already a fuel used for energy by industry before the power to fuel trend. Often as a by-product from chlorine gas production or conventional H2 steam reformers, where it is "contaminated" with other hydrocarbons, it is used to heat convection reformers. CS has been supplying burner systems for various concentrations of H2 for all types of hydrogen production plants for over 10 years. Hydrogen has also always been an important ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
LowNOx Systems for Nitrogenous Fuels
During the combustion of organic fuels with a high nitrogen content, NOx concentrations of up to several thousand mg or ppm are produced during a normal combustion process. The most efficient primary measure for NOx reduction is the staged combustion, where the combustion air is applied in two or more stages, depending on the ...
By CS Combustion Solutions GmbH based in Wien, AUSTRIA.
-
Gas Detection Solutions for Power Generation Industry
Boreal possess an array of products for the power generation industry from emissions stack monitoring, boiler room monitoring, chloride leak detection, and ammonia slip in deNOX. Boreal’s products are tailor made for coal fired power plants, natural gas fired, and waste-to-energy. Whether gas detection is used for safety, process, or environmental reasons, Boreal has you ...
By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).
-
Gas Turbine Generator for Marine
The marine industry follows the most sophisticated norms and standards to ensure safe and sustainable long-term operation. Equipment needs to operate reliably throughout a voyage while exposed to the elements, corrosive environments, and pitch & roll movements of vessels. OPRA’s engineers work closely together with certifying authorities to solve these ...
By OPRA Turbines based in Hengelo, NETHERLANDS.
-
CHP Unit for Biogas
Power generation from biogas produced by fermenting agricultural animal and plant waste is becoming more and more popular in recent years. TEDOM CHP units operate in hundreds of biogas plants in numerous countries worldwide. The values in the table are informative only. The gas consumption is mentioned with tolerance according to ISO 3046-1. Maximum Heat Output and Total Efficiency figured with additional exhaust heat exchanger. For selected units, we offer a version with emissions NOx under 100 mg/m3. ...
By Tedom a.s. based in Výcapy, CZECH REPUBLIC.
-
Micro SNCR System for Small Biomass Boiler Industry
FlowVision’s Micro SNCR system has been specifically developed for the small biomass boiler industry. As more stringent emission regulations are forced upon the small scale boiler sector, post combustion NOx reduction technology is needed to achieve the limits. The ideal solution is to install an SNCR system, however, conventional systems can be large and complicated. The FlowVision Micro SNCR system provides a compact cost effective solution to your NOx reduction needs. ...
By FlowVision A/S based in Odense N, DENMARK.
-
Compressors for Steam Power Plants
In steam power plants, the thermal energy contained in water vapour is used to power a steam turbine which in turn drives the generator. In the process, conventional fuels such as oil, natural gas, hard coal or brown coal are used to fire the steam boiler. In coal-fired power plants, coal is the only fuel used, whereas waste incineration facilities can also use treated waste in order to generate electricity. ...
By J.P. Sauer & Sohn Maschinenbau GmbH based in Kiel, GERMANY.
-
Conventional Power Generation Systems for Fast Response, Peaking Power Plant/Black-Start Power Generator
The Clean Energy Systems oxy-fuel gas generator and OFT-J79 expander turbine are ideally suited to emergency start-up and peaking power plant applications. Conventional peaking power plants typically take 10 to 30 minutes or more to come online because of the need to warm up expensive NOx catalysts and bring the facility to its required operating temperature. CES power plants require less time to start up, cost less to run, and release effectively zero emissions to the ...
By Clean Energy Systems, Inc. (CES) based in Rancho Cordova, CALIFORNIA (USA).
-
Air emissions solutions for boilers and burners sector
Measurement Technique for Combustion Applications. Gas burners, Fuel burners, Low NOx burners, FLOX burners, Large-sized combustion plants, Large-sized boilers, Industrial ovens, Biomass firing plants, Wood-firing combustion ...
By Online Safety Services (Europe) Ltd based in Staffordshire, UNITED KINGDOM.
-
Compressors for Diesel-Engine Generators
Diesel-engine generators (also known as gen-sets) consist of a diesel engine and a generator. Given that they provide an independent means of generating electricity, they are a popular choice at production sites in remote areas or as emergency power supplies for major banks, hospitals, airports and even entire towns or cities. Indeed, a number of countries and island states produce the majority of their electricity using diesel-engine generators. ...
By J.P. Sauer & Sohn Maschinenbau GmbH based in Kiel, GERMANY.
-
CHP Unit for Natural Gas
he values in the table are informative only. Maximum Heat Output and Total Efficiency figured with an additional exhaust heat exchanger. For selected units, we offer a version with emissions NOx under 100 ...
By Tedom a.s. based in Výcapy, CZECH REPUBLIC.
-
Gasification Unlocks the Value of Biomass and Waste
Frontline’s gasification and gas upgrading technologies convert low-value biomass and waste into high-value products. Frontline takes what appears to be waste that is usually burned as wood chips, put in landfills as municipal solid waste, or plowed into the soil as crop residue and unlocks there potential. We provide the opportunity to not only turn waste into value at high efficiency and yield but to reduce pollution as ...
By Frontline BioEnergy, LLC based in Nevada, IOWA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you