Nox Control Equipment For Renewable Energy
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
Two independent firing units and flue gas paths offer very high flexibility in the ZFR thanks to a doubled modulation range. - Very high efficiency across the entire power range - Reliable solution for highly fluctuating steam demand - Project-specific equipment and optional components, for example superheated steam generation - Future-proof with options for low-NOx and CO2-neutral operation - ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
Ultra-compact steam boiler producing up to 5,200 kg/h of steam, built to EN 12953 standard. The CSB excels with its high efficiency rating of up to 95.3% and its low emissions already comply with future requirements of the MCP Directive (EU) ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The UT-L is a particularly reliable and efficient heat generator with output from 650 to 25,000 kW at up to 16 bar. The design complies with the Gas Appliances Regulation. The heating boiler offers high performance and is extremely compact. ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Centaur®gas turbines are at work today in thousands of installations both offshore and on land ranging from arctic to tropical ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The CCC Catalyst Monitor by Continental Controls Corporation is a centralized control system that allows for multiple inputs (O2 Sensor, NOx Sensor, Cat dP, Cat Temperature), and outputs enabling optimal performance when combined with CCC ECV5 air-fuel ratio control valve and an NSCR or Oxidation catalysts. Acting as a central communication hub, it integrates inputs and outputs for various ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The high temperature are is the further developed NOXmatic are for the safe and low-emission combustion of land ll, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas com- ponents are fully processed, thus greatly reducing the formation of nitrogen ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot valve is responsible for controlling the flow of fuel and air in the engine, ensuring that the engine operates at optimal levels of efficiency and safety. ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Mini-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) is Zeeco’s GLSF Min-Emissions down-fired burner firing with Refining Fuel Gas in the outer tips and PSA gas in the center tip. This design provides a flame shape that is normally the same width as the outside diameter of the burner tile allowing the burners to be installed in close ...
-
Manufactured by Entech - Renewable Energy Solutions Pty Ltd.based in AUSTRALIA
WtGas is the core technology of the Entech-Tru-RES™. It’s based upon a low temperature gasification process that converts waste from its solid to gaseous form of syn-gas (a methane like gas), so that it can be fired to generate energy; with emissions that are cleaner than firing of any fossil fuel (including natural gas!). The WtGas renewable energy system adopts ENTECH™ ...
-
Manufactured by Olymp Werk GmbHbased in AUSTRIA
Perfect combustion is no coincident. A long experience in building burners is the solid base for a modern and reliable combustions system. Olymp has always been one of the most innovative companies and holds many patents. The Viscostat oil preheater for gasoil is used on many burners. Olymp burners are made under the most modern aspects and the high quality standards of Olymp ensure you about ...
-
based in USA
The 9E gas turbine is GE's robust and proven 50 Hz workhorse. With more than 600 units shipped, it has accumulated over 23 million hours of utility and industrial service-often in arduous climates ranging from desert heat and tropical humidity to arctic cold. 9E gas turbine systems are also designed for reliable operation and minimal maintenance at a competitively low installed cost. The 9E gas ...
-
Manufactured by Preferred Utilities Manufacturing Corporationbased in USA
The Preferred AP burner is a low NOx, high efficiency, natural gas and/or fuel oil fired burner for firetube and small watertube boilers. It features: 30 ppm NOx without FGR. Low excess air operation throughout the turndown range. High turndown (10:1) firing natural gas. ...
-
Manufactured by Selnikelbased in TURKEY
The fluidized bed combustion technology introduced by Selnikel with a perfect system for burning low calorific value coals in an economical and evironment friendly way. Alternatively to the coal, it is also possible to burn biomass and other solid ...
-
Manufactured by Broag Limited - part of Broag-Remehabased in UNITED KINGDOM
The Quinta Ace 160 is one of the most advanced wall-hung boilers on the market. It can work as an extension of the Quinta Pro range giving you the ability to mix and match cascades. This enables you to achieve the closest possible match to your required load. With plant room space at a premium, the ability to move large outputs away from the floor and onto the wall makes the overall design ...
-
Manufactured by Sigma Thermal, Inc.based in USA
A radiant–convective style heater is the most well-known and commonly used style of direct-fired heater. These heaters utilize a bare tube radiant zone in combination with a bare / finned convection section. Vertical cylindrical, A-frame, and cabin style are the most common configurations. Sigma Thermal offers all types of radiant–convective heater designs including API 560 ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Free-Jet burner is a Next Generation emissions round flame ...
-
Manufactured by Bruest Catalytic Heatersbased in USA
While natural gas is normally transmitted in pipelines at pressures up to 1400 PSIG, Compressed Natural Gas (CNG) is normally stored in pressure vessels up to 3600 PSIG. For CNG to be usable, it must be decompressed or ‘let down’ to a more manageable pressure. This is a crucial part of the CNG PRS (Pressure Reduction System) process. Due to the Joules Thompson Effect, where gas ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Min-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) shows Zeeco’s GLSF Min-Emissions round flame burners in operation .The design allows for a compact flame shape which is basically the width of the burner tile making Zeeco’s burners a great choice for applications that require the burners to be mounted close together or far apart while ...
-
based in UNITED KINGDOM
Gas fired, stainless steel, semi-condensing, fully modulating, water cooled ultra low NOx pre mix gas fired boilers. The boilers are packed with features that are best in class and provide high output, extreme efficiency, reliability and ultra low harmful emissions. There are 6 models from 656kW to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you