Refine by
Waste Combustion Services
17 services found
by:European Plastics Recyclers based inBrussel, BELGIUM
Energy recovery refers to operations that aim to use the released energy obtained during the com-bustion of plastics waste. This energy can be used to produce heat and/or electricity for domestic or industrial use. This process should be applied to the plastic waste of bad quality which is not beneficial from an environmental and economical ...
Premium
Manufactured by:Inciner8 Limited based inSouthport, UNITED KINGDOM
INCINER8 have many years experience in the design and supply of waste incinerators. Due to the broad nature of end users we have seen almost all sizes and scales of operation and types of waste that need incinerating. Whether you need the incinerator purely to burn waste or it is just a part of a larger process (such as the combustor for a waste to energy solution) or for cleaning paint or ...
by:Geocycle - LafargeHolcim Ltd based inHamburg, GERMANY
The process for the sustainable processing of rotor blades was developed by Geocycle and is the only legally certified process of its kind! Our service already starts with the collection of the rotor blades at the site of the wind turbines. This will save you cost-intensive heavy load or special transportation and logistic and administrative expenses are reduced. By monitoring the entire supply ...
Manufactured by:Beijing Peking University Pioneer Technology Co., Ltd based inBeijing, CHINA
To avoid or effectively reduce the severely toxic substance “dioxin” which may be generated during the waste burning, all countries generally adopt the oxygen-rich combustion technology to reduce the secondary environmental pollution caused by waste ...
by:Miller Environmental Transfer based inTulsa, OKLAHOMA (USA)
10,500 tons of residential waste is sent every day to landfills. That’s enough waste to fill the entire Empire State Building. So what can we do with this waste? Make energy! With Waste to Energy electricity plants. Here’s how it works: Waste is burned to heat a boiler. This generates steam for a turbine to spin. The turbine creates electricity, which drives a power generator. One ...
Manufactured by:Westland Environmental based inEdmonton, ALBERTA (CANADA)
Waste incineration is the thermal oxidation of combustible matter with oxygen (from air) at sufficient temperatures to ignite the waste. The combustion design also generates heat sufficient to destroy volatile contaminants in the hot gases before being emitted through the stack. Cyclonator incinerators can be modified to recover ...
Manufactured by:Weiss ApS based inHadsund, DENMARK
Process optimization, Technical assessments, Service and Service agreements plus a hands-on with environmental standards make WEISS A the ideal choice for improving and maintaining biomass and Waste fired combustion and energy recovery ...
by:Richbol Environmental Services Ltd. based inIkeja, NIGERIA
Waste generation has become a major problem to various governments in the Sub-Sahara Africa lately. The large volumes being generated daily has become a nightmare to the government, residents and even the environment. Therefore, turning the waste into energy or electricity is inevitable to save humanity and the environment. Waste- to energy which ...
by:I.C.E. AG based inWil, SWITZERLAND
Delivering a system is one thing. Engineering it for best fit with existing equipment is another. With us, you get both from a single source: an intelligent, complete solution, tailored exactly to your requirements, delivered on time, with the right quality, and optimally integrated. From planning, to system delivery, engineering and erection, you benefit from simpler project workflow, less risk, ...
Manufactured by:DP CleanTech based inJiyuqiao, Wuchang District, CHINA
One of DP CleanTech’s core competences is the design and engineering of biomass and waste-to-energy combustion systems. Our original technology is present in some of the first biomass power plants in the world which are still running well today. Pre-engineering packages are often required to provide proof of concept for the technology; or to provide a ...
by:Dublix Technology ApS based inGentofte, DENMARK
Dublix Engineering FuzEvent system is applying high-level control strategies which include elements like rules for handling special problems due to difficult waste or other matters occuring on the complex operation of waste to energy combustion ...
by:Clean Harbors based inNorwell, MA, MASSACHUSETTS (USA)
Clean Harbors is the industry"s leading provider of high-tech, high-temperature destruction of hazardous and industrial waste. Broad permit capabilities and high throughputs deliver maximum convenience and efficiency to customers. With nearly 70% of North America"s incineration capacity, our six incineration facilities in the U.S. and Canada ensure we can meet any requirement from any customer. ...
Manufactured by:Advanced Alternative Energy based inLawrence, KANSAS (USA)
This communication is to announce a new technology for waste and biomass combustion. This technology was developed to overcome problems associated with burning difficult combinations of feedstock fuels such as biomass, solid wastes or agri-residue, for heating or for power generation. This new system is well suited for utilizing various household ...
by:COWI A/S based inKongens Lyngby, DENMARK
COWI provides multidisciplinary services for the environmentally sound thermal treatment of combustible waste at waste-to-energy plants and utilisation of the energy in waste and biomass. Waste is no longer something that simply has to be disposed of. It is becoming a useful and valuable energy resource. Our aim ...
by:Beta Analytic Inc. based inMiami, FLORIDA (USA)
ASTM D6866 is a standard method employing radiocarbon dating techniques to determine the percentage of “recently fixed carbon” (biogenic fraction) versus “old carbon” (non-biogenic fraction from fossil sources) present in a solid fuel or its stack gas emission. Materials in fuels (municipal solid waste, used tires, sewage sludge, refuse-derived fuels, etc.) with recently ...
by:BIOS BIOENERGIESYSTEME GmbH based inGraz, AUSTRIA
Expertises concerning various aspects of energetic biomass utilisation and environmental assessment issues Expertises concerning emissions and evaluation of emissions from waste wood fired combustion plants (including analyses and measurements) as well as evaluation of primary measures for emission reduction Expertises concerning corrosion and ...
by:Norton Engineering LLC based inDayton, OHIO (USA)
Going Green... it's no longer a concept of the future. Green Energy is in many cases one of the biggest factors in new designs today. Here at Norton Engineering, we try to incorporate green energy concepts in our designs whenever possible (especially when it makes economic ...