Only show results in Virginia? Ok

power generator control system software

  • Premium

    Sierra - Version CADET Edge - Dynamometer and Engine Controller Software

    The CADET Edge is part of the CADET range of control, automation and datalogging control systems and is designed specifically for dynamometer control and engine throttle actuation. The CADET system can actuate eddy current, hydraulic, AC or DC dynamometers and will be supplied with the appropriate power modules.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Compass Control System

    The Compass Control System was originally developed to provide an easy-to-use interface between the operator and the switchgear and generation equipment but its’ uses have been successfully employed in many different environments. The Compass Control System is a hardware and software platform that communicates with ALL of your ...

    By W. A. Benjamin Electric Company based in Los Angeles, CALIFORNIA (USA).

  • Zonos - Energy Control Software

    ZONOS allows the collection of generation data and a customer friendly visualization as well as a need-based switch off or output reduction of solar and wind power plants, battery systems or combined heat and power stations.

    By Cuculus GmbH based in Ilmenau, GERMANY. from Energy Control Software Software line

  • RAMWare2 - Interface for Controlling Software

    RAMWare2 provides a software interface for controlling a LabRAM. It is a complete redesign of first generation RAMWare. The biggest change, besides appearance, is the addition of Acceleration Tracking. Acceleration Tracking closes the control loop on the RAM operations. Instead of setting Power (see NOTE above), the user sets an acceleration ...

    By Resodyn Acoustic Mixers Inc (RAM) based in Butte, MONTANA (USA).

  • Spard - Power Graphic Software

    SPARD POWER is graphic software that simulates, analyses and optimizes electric power systems. It is suited for simulating and analyzing any electric transmission and distribution system, including those of industry plants. It is one of the user-friendliest programs on the market; just by one simple click on any network element you can observe ...

    By Energy Computer Systems Ltd (ECS) based in BOGOTÁ, COLOMBIA.

  • Generator Start-up Software

    Using full frequency-dependent machine and network models, the Generator Start-Up calculation program analyzes cold-state starting of generators under normal and emergency conditions. The entire generator start-up process is modeled, including automatic control relay simulation and dynamic behaviors of exciters-AVR, governor, turbine /engine, and ...

    By ETAP based in Irvine, CALIFORNIA (USA). from Generator Start-up Software Software line

  • Delphin ProfiSignal - Version Klicks - Automate and Control Softtware

    ProfiSignal Klicks is software that enables users to operate, monitor and control their experiments as well as to acquire and evaluate their measurement data. The vision behind ProfiSignal Klicks is software that enables scientists, technicians and engineers to generate their own systems independently without the need for specialist assistance. ...

    By Delphin Technology AG based in Bergisch Gladbach, GERMANY.

  • IDSpecto - Metering Information System

    Our systems work when the wind blows and wind turbines turn. And even if not. Because regulating and controlling wind turbine generator systems is one of the numerous application cases for our metering information system IDSpecto.

    By GÖRLITZ AG based in Koblenz, GERMANY.

  • Fuel and Material Flow Management for Power Plants

    MBS Power Generation module provides functionality to support fuel and material flow management for thermal combustion plants.

  • zenon - Version Logic - Integrated PLC System

    Efficiency and smooth Integration, from Sensors through to ERP. With zenon Logic, the zenon Product Family boasts with an integrated, IEC 61131-3-based PLC system for maximum process control and logical data processing. zenon Logic effortlessly links PLCs and by that facilitates both process engineering and logical data management.

    By COPA-DATA GmbH based in Salzburg, AUSTRIA.

  • zenon - Version Operator - Embedded HMI System

    Ergonomics meets HMI, from Configuration through to Operations. Configure and control machines and equipment ergonomically with zenon Operator, the HMI system for all Windows operating systems. Multi-Touch technology and versatile applications make zenon clear and intuitive.

    By COPA-DATA GmbH based in Salzburg, AUSTRIA.

  • Smart Grid - Integrates Plants and Systems

    Within intelligent electricity networks, so-called smart grids, all areas communicate with each other from generation, via transport, storage and distribution up to consumption. Thanks to this communication, the different areas can be coordinated to, for example, avoid electricity transmission constraints, reduce or balance load on the grids and ...

    By GÖRLITZ AG based in Koblenz, GERMANY.

  • HI-System ERP Software

    Hi- System consists of three Modules: HI-Account Module. HI-Distribution Module. HI-Marketing Module.

    By Kalosoft Systems Technologies Pvt Ltd based in Dehradun, INDIA.

  • cmNavigo MES - Manufacturing Execution System

    cmNavigo MES is an innovative software platform with a deep set of modular applications that provides manufacturers in complex industries with maximum agility, visibility and reliability. It scales to your operations, drives visibility of production and its costs across your enterprise and supply chain, and is easy to implement on your existing ...

    By Critical Manufacturing, Inc. based in Moreira da Maia, PORTUGAL.

  • PowerOn - Reliance Energy Management System Software

    Electric utilities are faced with many challenges imposed by today's Smart Grid. High penetration of bulk renewables, demand response options, aging assets and an aging workforce, coupled with increased operating and maintenance costs, security, increased integration with external systems and increased data processing requirements contribute to ...

    By GE Digital Energy based in Atlanta, GEORGIA (US) (USA).

  • Electrical Transient Stability Software

    The electrical power transient stability calculation program enables engineers to accurately model power system dynamics and transients by simulating system disturbances and other events.

    By ETAP based in Irvine, CALIFORNIA (USA). from Electrical Transient Stability Software Software line

  • GPM - Zero Injection

    “GPM Zero Injection” is smart regulation and its solution allows dynamic control of the power delivered by one or more inverters, according to data from internal customer consumption. This control system interacts between consumption (measured by an analyzer) and photovoltaic generation, so that production meets the demand for energy. ...

    By GreenPowerMonitor based in Barcelona, SPAIN. from Zero Injection Software line

  • proWAVE Software

    proWAVE software is an Oceanlinx tool which allows one to model a wave energy converter (WEC) as a fully integrated system including oscillating water column (OWC), turbine, generator, flywheel, and all manner of controls features.

    By Oceanlinx Limited based in Macquarie Park,, AUSTRALIA.

  • ROHR2

    ROHR2 is the standard tool for pipe static and structural framework analysis, covering a variety of specifications like ASME, ANSI, EN 13480, STOOMWEZEN D1101 and BS 7159 or ISO 14692. The software environment can be supplemented by a range of programs enhancing the engineers daily job, as there are FE- analysis, isometric capabilities and ...

    By SIGMA Ingenieurgesellschaft mbH based in Unna, GERMANY.

  • Emission Master Combustion

    Combustion occurs during basic power generation operations where steam, electricity, and other forms of power are produced through the burning of basic fuels such as natural gas, oil, and coal.  When these fuels are burned many different compound emissions result in the exit gas stream from the power plant.  Combustion emissions also ...

    By Mitchell Scientific, Inc. based in Westfield, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you