Turbulator Software
-
by Vortex SLbased in SPAIN
Did you ever wish to have a (turbulent) measurements time-series at each turbine position of your planned or existing wind farm? Now, you can get something outstandingly similar! After two years of development on NCAR cutting-egde WRF-LES model, we are proud to offer you probably the most measurement-like set of synthetic wind time ...
-
Manufactured by Advanced Designs Corporationbased in USA
The S.T.A.S.is an automatic system for detecting regions of high turbulence and/or reflectivity. Using values from the control file, it determines whether a region meets the criteria for issuing a warning and if it does, it draws a boundary around that region on the screen and optionally issues an audible ...
-
based in GERMANY
AUSTAL2000, the official dispersion program for the 'Technical Instruction Clean Air' (TA Luft), allows the use of externally calculated wind- and turbulence fields. A need for the applications of externally calculated wind fields is given if the flow field is influenced by buildings. These fields have to be provided to AUSTAL2000 in a ...
-
by NUMTECHbased in FRANCE
The FLOWSTAR model produces 3-D wind field and turbulence predictions using global met. data, and factoring in the effects of hilly terrain and land ...
-
by SimFlowbased in POLAND
SimFlow offers the ability to simulate external and internal flows in a wide variety of applications, such as: road vehicles, aircrafts, trains, buildings, industrial facilities and many others. In SimFlow you can use the state-of-the-art turbulence models, discretization schemes and numerical methods. Simulation results may help ...
-
by Vortex SLbased in SPAIN
Probably the most complete modeling product on the market: long-term statistics at all heights within an area plus high-resolution temperature, mean wind, extreme wind (Vref) and turbulence intensity maps. Now with the ability to be calibrated with measurements! ...
-
based in USA
GT-POWER is the industry standard engine performance simulation, used by all major engine manufacturers and vehicle OEMs. GT-POWER is used to predict engine performance quantities such as power, torque, airflow, volumetric efficiency, fuel consumption, turbocharger performance and matching, and pumping losses, to name just a ...
-
by ReSoft Ltdbased in UNITED KINGDOM
The optimisation module of WindFarm determines the optimum layout of wind turbines on real wind farm sites incorporating the natural, practical and planning constraints that normally apply to wind farm ...
-
by FUROWbased in SPAIN
FUROW has its own wind resource calculator, allowing users to obtain all necessary maps to make a correct wind resource assessment of a given site. All calculations can be performed at several heights, depending on the users' ...
-
by ReSoft Ltdbased in UNITED KINGDOM
WindFarm calculates the annual energy yield of a wind farm simultaneously including topographic and wake effects. ...
-
by WindSim ASbased in NORWAY
The Actuator Disc and Blockage Model add-on in WindSim 11 Provides You a Remarkable Method for Simulating Speed Reduction in Both Upstream and Downstream. ...
-
based in USA
Most advanced software for creating and optimizing turbine layouts, designing and costing balance-of-plant, performing energy estimates, and conducting ancillary analyses to produce a plan banks will approve. ...
-
by Sereemabased in FRANCE
The power curve is the tool of choice to monitor and readily detect a wide range of issues affecting the wind turbine production. However, power curves can be hard to interpret when the wind availability and environmental conditions change every month. Windfit Performance Index combines production and wind speed data from SCADA with the high frequency compass and environmental parameters captured ...
-
based in USA
CFS – Configured Fireside Simulators – are designed for use by engineers who are not experts in Computational Fluid Dynamics (CFD). CFS gives the real-world engineer the tools needed to optimize and analyze complex furnaces and boilers. CFS models are tailored to the customer’s furnace or boiler and accessed through an intuitive Graphical User Interface. The underlying CFD ...
-
based in POLAND
Your R&D through flow and thermal simulations! We work as engineering consultants. You tell us what you want to calculate. We carry out the simulations, give you suggestions and deliver the report. Also, we work on longer R&D ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you