Photovoltaic Cells Equipment For Solar Energy
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Multi-Output Power System for Multi-Chamber Power Delivery in Solar PV Manufacturing. The Ascent MS supports up to five independent chambers of PERC PECVD deposition processes in a single unit. This optimizes power delivery, enables independent programming, and simplifies deposition machine design to help you lower capital costs and increase ...
-
Manufactured by Ecoprogetti srlbased in ITALY
ETS2100 is an advanced and innovative tabber and stringer machine for providing throughput of 2100 cells/hour for soldering photovoltaic solar cells. This equipment use Ecoprogetti's innovative patented hybrid Soldering Head to solder very thin PV solar cells without mechanical or thermal stress resulting in breakage rate below ...
-
Manufactured by JX Crystals, Inc.based in USA
Thermophotovoltaic (TPV) cells generate power from certain bandwidths of light, similar to solar cells. JX Crystals focuses upon infrared frequencies, which are emitted from heat. Specially designed Gallium Antimonide (GaSB) cells are used to most efficiently convert the heat emitted from ignited ...
-
Manufactured by Atonometrics, Incbased in USA
Designed for PV System Monitoring: Specifically designed for low-cost, high-accuracy solar irradiance measurements for outdoor monitoring of PV ...
-
Distributed by BERGER Lichttechnik GmbH & Co. KGbased in GERMANY
The Pulsed Solar Simulator PSS 8 is optimized for module production lines, Research&Development and off-line measurement. It can be easily integrated into automatic and semi automatic handling systems by automation suppliers. The system is available with options as a customized “Plug&Play” test station for manual and automatic ...
-
Manufactured by Optosolar GmbHbased in GERMANY
For measurements of relative and absolute spectral response resp. quantum efficiency of solar cells. Spectral range 300 nm —3000 nm (or as desired), cell size up to 4 x 4 cm2 . Specialised bias light adapters for tandem cells or concentrator cells available. For the determination of solar cell parameters, such as diffusion length, recombination velocity, thin film spectral transmission and ...
-
Manufactured by Solaria Corporationbased in USA
Solaria PowerView (Building Solutions) - Architectural Glass that allows uniform view while generating solar power. Leveraging its unique technology, certified products and automated, high volume manufacturing line, Solaria’s building solutions address the mainstream market requirements for building integrated photovoltaic (BIPV) windows and positively contribute to achieving net zero ...
-
Manufactured by Abora Solarbased in SPAIN
Our hybrid solar panel has a high-efficiency thermal collector at the rear of the panel and photovoltaic solar cells at the front. These convert solar energy into electricity and, at the same time, the thermal collector collects the radiation emitted by the sun and converts it into heat. Our aHTech ® technology goes further than any other solar panel, as it reduces energy losses, making our ...
-
Manufactured by P. Energybased in ITALY
P.Energy SATELLITE™ I is the entry level semi-automatic PV module assembling line. It is semiautomatic and it is designed for a small production (1 MW in 1 ...
-
Manufactured by Qn-Solar PV Limitedbased in CHINA
210mm Bifacial N-type TOPCon Half-cell PV ...
-
Manufactured by Absolicon Solar Collector ABbased in SWEDEN
By focusing the light on high-efficiency photovoltaic cells, hot water and electricity are generated in the same system. The PVT model produces thermal heat up to 75°C and electricity at 230 ...
-
Distributed by FATH Solar GmbHbased in GERMANY
Monocrystalline solar cells are recognisable by their black to black-blue colour. Each cell consists of a single crystal. Compared to other silicon cells, monocrystalline cells have the best efficiency, however a lot effort is involved in their production and therefore they are more expensive than polycrystalline cells. They are used when only a limited area is available for the generation of ...
-
Manufactured by Panda Water Tech Pvt. Ltd.based in INDIA
What is Solar Power: Solar Power is the conversion of sunlight into electricity. Its done in two ways - 1. Directly Using Photo Voltaic (PV), 2. Indirectly using Concentrated Solar Power ...
-
Manufactured by Sova Power Limitedbased in INDIA
Excellent Power Output with +ve Tolerance upto 4.9Wp. 25 Years of Linear Power Guarantee. High Performance Modules with efficiency up to 14.07%. All the modules are PID resistant. F.S.I (Flame Spread Index) tested modules first in India. 100% EL ...
-
Manufactured by DelSolar Co., Ltd.based in TAIWAN
A full range of cell processing, including: Mono-crystalline Silicon-based cell. 6 inch cell size with 3 busbars. Wafer thickness of 180 to 200 µm. High efficiency and thin wafer handling capabilities: Dynamic optimized setting system. Soft-touch wafer handling system. Robust-in-house automation systems: Improved quality, efficiency and yield increase Highly automated wafer transport ...
-
Manufactured by Abet Technologies, Inc.based in USA
The Abet Gen II optical design, patent pending, dramatically increases the percentage of photons reaching the work plane. All electronics are packaged in the lamp house -no clutter of high power cables to deal with. A digital shutter timer allowing both manual and external control is included with every unit. Standard maintenance, lamp or filter replacement, does not require any tools. Locking ...
-
Manufactured by P. Energybased in ITALY
The new Combined Tabber-Stringer machines of the FURBA series are the result of 15 years of constant development in the field of photovoltaic technology. The new CTS FURBA series is composed by: TS450FURBA, TS600FURBA, TS900FURBA, TS1200FURBA, ...
-
by Coveme S.p.Abased in ITALY
Coveme has developed a range of revolutionary backsheets specifically designed for photovoltaic modules with heterojunction cells. These products have an innovative integrated barrier layer that gives the backsheet a low WVTR and guarantees excellent protection for heterojunction cells which are particularly sensitive to moisture. Furthermore, these backsheets, not having an aluminum layer, ...
-
Manufactured by AE Solar GmbHbased in GERMANY
Type of panels : AE DOUBLE-GLASS LARGE. Type and no. of cell : Mono-crystalline PERC 72 (6x12). Maximum system voltage : 1500 (V). Power range : 380W-400W. Efficiency range : 18.94%-19.94%. Dimensions : 2002 x 1002 x 6 mm. Weight : 28 kg. Performance Guarantee : 30 years. Product Warranty : 12 ...
-
Manufactured by DualSunbased in FRANCE
DualSun’s SPRING Shingle Black photovoltaic panel is designed for self-consumption projects. This module, with Shingle photovoltaic technology on the front, is more durable and more efficient than a standard module, without compromising on aesthetics. The panels in the DualSun SPRING® Made in France range consist of a patented heat exchanger that allows water to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you