Photovoltaic Modules Services For Solar Energy In Europe
-
by PV Cyclebased in BELGIUM
We offer a direct pick-up service for a variety of waste products, including PV modules, batteries, EEE or production scrap. All products collected directly at a customer’s location are immediately transported to one of our recycling partners. To further assist our customers, PV CYCLE also offers packaging and dismantling ...
-
Manufactured by KYOCERA Corporationbased in JAPAN
A photovoltaic system is designed for a long lifetime of more than 20 years, which places high demands on the quality of solar modules and components. In order to guarantee the safety and economical operation of a system, a DEKRA expert can identify defects and damage to photovoltaic ...
-
Manufactured by Eurotron B.V.based in NETHERLANDS
Eurotron equipment guarantees unparalleled quality and reliability. This, however, does not exclude equipment from requiring support and maintenance in case a complex task is at hand, for example, or damage occurs. In times of need, quick access to skilled support is vital. ...
-
Manufactured by Eternalsun Spirebased in NETHERLANDS
High-Accuracy Solar Testing Services in a Temperature Controlled Laboratory Setting. Spire Solar Iberia provides laboratory services in two key ports of Europe, in addition to consulting services, to ensure the maximum useful life of PV projects, optimize their production and minimize investment risks. ...
-
Manufactured by BARYSOL GmbHbased in GERMANY
Good and reliable advice; You can take advantage of our wealth of know-how and experience when we help you choose your individual photovoltaic unit. Simply contact us by phone or e-mail and arrange a date for a personal meeting. It doesn't matter where you live, we will be pleased to visit you free of charge without ...
-
based in GERMANY
In the booming solar industry, the role of materials testing, certification and quality control is becoming increasingly important. As a complement to our research and development work, we offer related testing and certification services to clients.At present, Fraunhofer ISE has four accredited testing units: TestLab Solar Thermal Systems, TestLab Solar Façades, TestLab PV Modules and the ...
-
Manufactured by Solarnova Deutschland GmbHbased in GERMANY
Following our philosophy: all critical processes are fully automated. Other than that, the degree of automation is customized to individual needs. All machineries are Made in Europe. The module production line is designed to allow future expansion for duplicated or triplicate capacity (retrofits ...
-
by DERlabbased in GERMANY
The energy yields of the modules are measured according to DERlab technical guidelines on long-term photovoltaic outdoor tests. The customer will be provided with the measured data and can opt for the additional evaluation service. DERlab technical guidelines describe the testing procedures as well as requirements for location and measurement equipment. The guidelines are available on the DERlab ...
-
based in ITALY
Installing a photovoltaic plant on ground requires a careful geological analysis of the soil, in order to plan the most appropriate support structures to sustain photovoltaic modules over time.Moreover, the fixed structures must be well anchored to the ground in order to withstand the external loads of weights, as well as those of solar panels, wind rips and landslides. For this reason Ravano ...
-
Manufactured by Eclipse Italia Srlbased in ITALY
Eclipse Italia has developed over the years, together with important Italian and international partners, procedures and quality controls on its production lines that have allowed the company to establish itself in the world of ...
-
based in GERMANY
More than 80 per cent of the global solar cell and photovoltaic module production is based on crystalline wafer technology. Further improvement of this technology requires increased cell efficiency as well as the usage of thinner wafers and a simultaneous reduction of wafer and cell breakage rates. The research activities of the »silicon wafers« group are focused on development and ...
-
Manufactured by Jurchen Technology GmbHbased in GERMANY
The walking paths between the PEG blocks allows access to the DC plant. The location and width of the walking paths is determined during the project design and should consider the O&M requirements. A minimal width of the walking paths should be ~1m (3.3 feet) to allow comfortable access by the O&M personnel. The location and size of the cable trays should be considered as well. The module ...
-
Manufactured by Solarpro Holding PLCbased in UNITED KINGDOM
Solarpro offers full or partial O&M packages customized to serve each customer’s needs. We will identify and provide the most suitable and cost efficient monitoring solution and O&M package for your power plant given its specific ...
-
Manufactured by Solar-Log GmbHbased in GERMANY
Photovoltaic plants represent a considerable investment. In order to secure the investment, the yields of the plant must be ensured as the investment calculation is usually based on a yield expectation. In order to secure the yield of a plant, a constant control is needed. Modern monitoring systems help here since occurring errors are immediately detected and the predicted electricity yields are ...
-
Manufactured by SILLIA VLbased in FRANCE
Our production tool allows to refine the sorting of the photovoltaic modules and to deliver products of homogeneous power. Indeed, SILLIA VL’s modules are automatically sorted out according to their power before being ...
-
based in ITALY
To increase the autonomy of an electric boat, in addition to increasing the capacity of the batteries dedicated to marine propulsion, it is possible to install range extension systems, which transform an electric boat into a hybrid. The hybridization of a boat can generally be of the Series Hybrid (IS) type, if a generator that uses the existing diesel/petrol tank recharges the batteries of the ...
-
Distributed by BayWa r.e. renewable energy GmbHbased in GERMANY
We ensure that dismantled photovoltaic modules are collected and recycled in a sustainable and affordable manner. Two methods of return are open to you: Disposal in small numbers: If you want to dispose of old modules, please send the completed and signed form 'PV CYCLE: Delivery enquiry' to solarsysteme@baywa-re.com or by fax to +49 (0)7071 9898710. We'll gladly call you back after checking the ...
-
Manufactured by In Balance Energy Ltdbased in UNITED KINGDOM
From our base in Swindon, Wiltshire we provide solar power system testing services for residential, commercial, industrial and agricultural clients across Southern England, with specialist experience working with farms, land owners and industrial ...
-
Manufactured by Eclipse Italia Srlbased in ITALY
The production cycle of our photovoltaic modules consists of different stages, all followed by specialized technicians and aimed at the production of high-yield photovoltaic modules. The production areas are all kept under controlled humidity, in order to guarantee the perfect conservation of the materials before ...
-
Manufactured by Eurotron B.V.based in NETHERLANDS
Time is money. Therefore, Eurotron delivers: On-time and efficient installation of equipment. Specialist ramp-up assistance. Operator and maintenance staff training. Short certification times enabled by pre-production at ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you