Solar Cell (Solar Cells) Equipment
-
Manufactured by Motech Industries, Incbased in TAIWAN
Dimension : 156.75mm x 156.75mm ± 0.25mm. Thickness(Si) : 180μm ± 20μm, 200μm ± 20μm. Front : Blue silicon nitride anti-reflection coatings, 0.7±0.1 mm silver busbars. Back : Full-surface aluminum back-surface field, 1.7mm±0.1mm (silver / aluminum) discontinuous soldering ...
-
Manufactured by Motech Industries, Incbased in TAIWAN
High conversion efficiencies resulting in superior power output performance. Outstanding power output even in low light or high temperature conditions. Optimized design for ease of soldering and lamination. Long-term stability, reliability and performance. Low breakage rate. Uniform ...
-
Manufactured by Schmid Groupbased in GERMANY
Based on n-type material PERL cells have a long life expectancy and achieve an efficiency potential of 25 %. Combined with the per se bifaciality of this cell architecture up to 40 % higher energy harvest in PV installations can be achieved. The simple manufacturing process based on the SCHMID co-diffusion leads to best of class conversion ...
-
Manufactured by CETC Solar Energy Holdings Co., Ltd.based in CHINA
Gallium arsenide-based solar cells are typically favored over crystalline silicon in industry because they have a higher efficiency and degrade more slowly than silicon in the radiation present in space. The most efficient solar cells currently in production are multi-junction photovoltaic cells. CETC ...
-
Manufactured by DPE Solarbased in TURKEY
Solar cells ( also called photovoltaics) absorb sunlight and convert it directly to electricity. Solar cells are very thin ( about 1/ 100th of an inch thick). Most Online you’ll have the ability to put in them after completion. When you purchase your pay for college papers Out of us. An article is basically a pro se ...
-
Manufactured by InnoLas Systems GmbHbased in GERMANY
The awarded high speed dash pattern process of InnoLas achieves a similar opening ratio as a dot pattern. The losses in Voc and FF caused by dots, which are not contacted properly, are avoided due to the size of the dashes. An optimized dash pattern can achieve highest cell efficiencies. ...
-
Manufactured by United Renewable Energy Co., Ltd. (URECO)based in TAIWAN
United Renewable Energy Co., Ltd. (a company from Taiwan where the sun shines) solar cells feature high quality, outstanding performance and reliability that you can count on. We have gained reputation among global ...
-
Manufactured by Sol Chip Ltd.based in ISRAEL
Sol Chip Pak™ offers 24/7/365 non-stop function by using Solar cells, a Rechargeable Battery and advanced Power Management circuitry. This unique design will continue to provide power for 24 hours a day during summer and winter for over 10 years. This power module includes all the components that are required to harvest energy from ...
-
Manufactured by Resol GmbHbased in GERMANY
The solar cell is used for measuring the irradiation intensity. The short-circuit current rises with increasing irradiation intensity. Depending on the controller, the sensor can also be used for additional plausibility control or direct control. The connecting cable can be extended to 100 ...
-
Manufactured by Win Win Precision Technology Co., Ltd.based in TAIWAN
Greater solar cells with greater module efficiency on your roof. Nominal Power: 410 Wp. Efficiency: Up to 20.93%. Maximum System Voltage: 1500 V. Snow/Wind Load: 5400/2400 Pa. Dimensions: 1726 mm × 1135 mm × 35 mm. Weight: 21.5 ...
-
based in NETHERLANDS
A solar cell converts light energy into electrical energy, which can then be consumed normally. The process occurring in a solar cell is called photovoltaic conversion. This is how sunlight is converted into ...
-
Manufactured by Hetech Solar Energy Co., Limitedbased in CHINA
144PCS 9BB solar cells for BIPV 440W half cell solar ...
-
Manufactured by Solaronix SAbased in SWITZERLAND
Solaronix is developing a new generation of photovoltaic panels based on Dye Solar Cell technology. Our models offer unprecedented possibilities in terms of customization and ...
-
Manufactured by Apollo Solar Energy Co., Ltd - Gintungbased in TAIWAN
Features: 270W-290W. 1640x992x40mm. ...
-
Manufactured by Eoplly New Energy Technology Co., Ltd.based in CHINA
Mono (Ø210) 156 X 156 mm2 156 Monocrystalline solar ...
-
Manufactured by ERA Solar Co.,Ltdbased in CHINA
High quality metal paste for back surface and electrode, ensuring good conductivity, high pulling strength and ease of soldering.The high quality level of ERA SOLAR guarantees long life-time and high earnings.Advanced PECVD film forming, providing a dark blue silicon nitride anti-reflection film of homogenous color and attractive ...
-
Manufactured by ERA Solar Co.,Ltdbased in CHINA
High quality metal paste for back surface and electrode, ensuring good conductivity, high pulling strength and ease of soldering.The high quality level of ERA SOLAR guarantees long life-time and high earnings.Advanced PECVD film forming, providing a dark blue silicon nitride anti-reflection film of homogenous color and attractive ...
-
Manufactured by Fully Green Power Co., Ltd. (FLP Group)based in TAIWAN
High conversion efficiencies resulting in superior power output performance Outstanding power output even in low light or high temperature conditions Optimized design for ease of soldering and lamination Long-term stability, reliability and performance Low breakage rate Uniform ...
-
Manufactured by Eoplly New Energy Technology Co., Ltd.based in CHINA
Poly 156X156 mm2 156 poly-crystalline solar ...
-
Manufactured by MiaSolé Hi-Tech Corp.based in USA
The MiaSolé cell is produced by depositing the CIGS film on a thin stainless steel sheet. The sheet is then cut into cell form, covered with the Ultrawire interconnect, and tested. The result is the most unique cell architecture in the industry. Not only is it the highest efficiency thin film cell, it is lightweight, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you