Solar Collectors Equipment For Solar Energy
-
Manufactured by Invent Srlbased in ITALY
The “solar thermal” combines two environmentally friendly technologies: the heat pump and the solar thermal collector. Thanks to the physical pattern identical to the one of a normal solar thermal system and to heat pump components, solar thermodynamic represents the new technology frontier for heating water (up to 60 ° C), saving up to 85% from traditional systems, in an ...
-
Manufactured by Openplus Ltdbased in PORTUGAL
Flat solar collector OP-V2.3 with high efficiency, for vertical or horizontal assembly. Hydraulic circuit in copper grid, with high selective copper plate absorber. The collector was designed for large installations. Due to its high yield, this collector is ideal for applications with large consumption of hot water directly or for those applications that require temperatures of 50º- ...
-
Manufactured by Atlantis Solarbased in USA
Atlantis Solar provides high quality copper tube, aluminum framed flat plate thermal solar collectors, and rack systems. You are guaranteed 100% durability with high quality thermal solar energy. The special module installation system is easy to mount on both flat and sloped roof, realizing the perfect integration between buildings and collectors, also meeting the demand of heat ...
-
Manufactured by Torresol Energybased in SPAIN
Torresol Energy builds plants with parabolic trough technology, which incorporate a molten-salt storage system. This system allows them to achieve a very high annual usage ...
-
Manufactured by Chatron Ldabased in PORTUGAL
No network connection, no batteries and no power consumption. They have 1 integrated photovoltaic panel that generates energy for the fan and the temperature ...
-
Manufactured by Illinois Tool Worksbased in USA
Krafft® SILKRON Polymer H-200 is a one-component, with high initial tack (green strength), high module, neutral hybrid polymer sealant, specially indicated to seal or glue (even structural) many substrates. It cures quickly at room temperature reacting with the air moisture. It does not contain solvent. It works from -40ºC up to ...
-
Manufactured by Solartron Energy Systems Incbased in CANADA
Enhanced Oil Recovery (EOR) is a term for techniques used to increase the amount of crude oil that can be extracted from an oil field. Solar EOR uses concentrated solar power to concentrate the sun’s energy to heat water and generate steam. The steam is then injected into an oil reservoir to thin out the the heavy crude oil to make it easier to remove from the ground. The traditional method ...
-
based in CANADA
Concentrating Solar Power (CSP) is a technology that involves using a large-scale array of parabolic reflectors or mirrors to collect solar thermal energy. This heat energy is used to generate steam to produce electrical power with traditional turbines as are used in fossil fuel and nuclear plants ...
-
Distributed by LP Hoying, LLCbased in USA
Grid power can cost in excess of $15000.00 per mile to bring out to a remote site. Solar power, with top quality, long life components is a good alternative. LP Hoying, LLC power supplies are highly efficient units using top quality solar collectors, batteries, support structures, and LP Hoying, LLC charge/output controllers. Units are supplied complete with all necessary components, hardware and ...
-
Manufactured by Baxi Heating UK Ltdbased in UNITED KINGDOM
The range of Solar Easy DHW systems represents a revolutionary new “Plug & Play” concept, ready to get the most benefit from solar thermal energy. The smallest possible space houses the hydraulic set, the expansion tank and the control unit. Fully connected and wired to form a single whole. The range comprises 14 different systems combining 160, 200, 300, 400 and 500 litre storage ...
-
Manufactured by China Jiangsu Audary New Energy Co .,Ltdbased in CHINA
ADL serial is Thermosyphon solar water heater, That is a kind of solar water heating system that solar collector and storage are connected together with the cylinder storage on the top and collector panel on the bottom. There is no need of pump to push the fluid and no need of pipeline between the collector and storage. It is a simple and safe solution to get heat power from the ...
-
Manufactured by Openplus Ltdbased in PORTUGAL
High efficiency flat solar collector OP-V4AL, for vertical or horizontal assembly with hydraulic circuit in copper grid and high selective aluminum plate absorber. This collector has the Solar Keymark ...
-
Manufactured by Bural Solar Ltdbased in TURKEY
Full plate absorber, laser welded with high selective blue coating. Ultra tight frame and rock wool insulation or optional direct-injected PU insulation. HP series are the perfect solution for areas have low solar radiation. With it’s modular mounting set, the collector can be mounted on flat roofs and pitched roofs. Solar Keymark certified according to EN12975 and EN ISO 9806:2013. ...
-
Manufactured by North American Solar Solutions-Solar DC Divisionbased in CANADA
The PHA series solar collector is designed with simplicity in mind; produce heat and transfer it directly to the intergraded tank with no pumps or additional parts. The tank also includes a copper coil-heat exchanger to tie into pressurized lines, allowing also the use of a food safe glycol for year-round use application. This method of heating the liquid directly is much more efficient and cost ...
-
Manufactured by Hamworthy Heating Limitedbased in UNITED KINGDOM
The well-proven Hamworthy Dorchester range of direct-fired water heaters has further evolved to include the latest Dorchester DR-TC range of combined solar and gas –powered water heaters for duty Domestic Hot Water (DHW) production. The Dorchester DR-TC is based around the Dorchester DR-FC Evo concept, with an efficient down-firing condensing burner and coiled heat exchanger but with the ...
-
Manufactured by Solahart Industries Pty Ltdbased in AUSTRALIA
Solahart's roof mounted tank systems save space at ground level and their elegant simplicity make them efficient and reliable. The Solahart 181L Series is a roof mounted, open circuit solar water heater specifically designed to provide economical service in medium to high solar gain areas. The smaller volume of the 181L makes it ideal for applications where low volumes of solar hot water are ...
-
Manufactured by Hewalexbased in POLAND
The 2xKSR10 evacuated tube solar collector is designed based on two KRS10 collectors connected to each other. Due to the way of its installation, it constitutes a basis for expansion of a solar collector bank by adding more KSR10 collectors. The efficiency and loss coefficients given in the table refer to the active surface of the collector. ...
-
Manufactured by Solimpeksbased in TURKEY
Solar Keymark certified. Almeco – Tinox highly selective copper. Rock wool insulation. Copper pipe. Ultrasonic welding. Low iron tempered glass. 10 years ...
-
Manufactured by Haining Jianeng Solar Energy Industry Co.,Ltdbased in CHINA
The pipeline is made of all the red copper and conducted by heat transfer medium liquid. Water can't flow in vacuum Tubes and operated when confined. The crust uses aluminum. alloy mould material of high strength with air flow design.It is furnished in good style. Can withstand high pressure when it work. Module design, arbitrary combination, which can meet the demand of large water ...
-
Manufactured by China Jiangsu Audary New Energy Co .,Ltdbased in CHINA
ADL serial is Thermosyphon solar water heater, That is a kind of solar water heating system that solar collector and storage are connected together with the cylinder storage on the top and collector panel on the bottom. There is no need of pump to push the fluid and no need of pipeline between the collector and storage. It is a simple and safe solution to get heat power from the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you