Solar Heating Equipment For Solar Energy In USA
-
Manufactured by Pfister Energybased in USA
Solar thermal technology harnesses solar energy for thermal energy or heat. This thermal energy is typically used to heat water, but can also be used for space heating. Commercial or industrial solar thermal systems are most cost effective in facilities with water heating systems that are expensive to operate, or in operations such as laundries or kitchens that require large quantities of hot ...
-
Manufactured by SunEarth Inc.based in USA
SunEarth provides its customers with a number of engineered residential solar water heating systems that have been certified or listed with various accredited third-party agencies. SunEarth designed solar water heating systems and components have been certified, approved and/or listed with the Solar Rating and Certification Corporation (ICC-SRCC), the International Association of Plumbing and ...
-
based in USA
TRNSYS (pronounced 'tran-sis') is an extremely flexible graphically based software environment used to simulate the behavior of transient systems. While the vast majority of simulations are focused on assessing the performance of thermal and electrical energy systems, TRNSYS can equally well be used to model other dynamic systems such as traffic flow, or biological ...
-
by Gear Solarbased in USA
For lower temperature applications, GEAR Solar's Solarpac thermal collectors with heat pipes may be installed in banks of up to 10 collectors in series and unlimited parallel-connected ...
-
Manufactured by Solar Industriesbased in USA
Commercial swimming pools like those at hotels, resorts, apartment complexes,HOAs,health clubs, camps and schools are perfect candidates for solar pool heating, since owners and operators have no choice but to keep their pools at a comfortable temperature. According to industry statistics, two-thirds of the commercial pools worldwide have either seasonal or year-round heating requirements. Most ...
-
Manufactured by 247Solar Inc.based in USA
247Solar Plants™ are true third-generation concentrated solar power (CSP) products that use a breakthrough solar receiver design, a proprietary thermal storage system and a unique turbine, combined with other proven technologies and off-the-shelf components, to produce the world’s lowest-cost 24/7 solar ...
-
Manufactured by Mass Megawatts Wind Power, Inc.based in USA
Over the past 15 years, Mass Megawatts has continually strived to innovate and improve alternative energy systems and technologies. This includes new innovations that significantly improve the efficiency of solar-power systems. Our latest innovation, the Mass Megawatts Solar-Power Tracking System (STS), is designed to increase solar energy production by 28% with only a 5% increase in system ...
-
Manufactured by Alternate Energy Technologies (AET)based in USA
Sku : AE-24, Name : AE Series flat plate collector 3' X 8', Length : 97.187, Width : 35.187, Height : 3.167, Gross Area : 23.7, Fluid Capacity : 0.8, Dry Weight : 85, Optimum Flow Rate : 0.9, Pressure Drop : 0.003, Btu : ...
-
Manufactured by SunPower Corporationbased in USA
SunPower Oasis C7 combines SunPower T0 single-axis tracker with rows of parabolic mirrors that reflect light onto modular SunPower Maxeon solar cell receivers, concentrating the sun's energy by 7 times. This record-breaking CPV tracker solution is based on SunPower’s proven experience in tracking systems.SunPower Oasis C7 has been designed from the ground-up for gigawatt scale deployment in ...
-
based in UNITED KINGDOM
High quality tubes made from borosilicate glass Withstands hail storms No clogging/choking Long lasting Inner coating of tubes consists of layers of copper, stainless steel and aluminium nitride Heats water to a very high temperature Makes hot water available even on partially cloudy days High quality PUF insulation for maintaining high temperature of water inside the tank End caps made from Uv ...
-
Manufactured by Illinois Tool Worksbased in USA
Permathane® 2100 is a high performance reactive silyl-modified adhesive sealant. It is a one-component moisture-cure sealant that exhibits excellent bond strength after cure. It imparts integral flexibility, superior adhesion and resistance to ultraviolet and infrared radiation. Ease of application, minimum shrinkage, fast skin formation, and primerless adhesion to most building materials and ...
-
Manufactured by Standard Solar, Inc.based in USA
Carport PV solar installations not only produce clean energy, they create a sheltered parking area protecting people and vehicles from sunlight, sun exposure and heating. Standard Solar has installed numerous carport canopies and other innovative solar structures and can help determine if this type of design is ideal for your ...
-
Manufactured by Apricus Solar Co. Ltdbased in CHINA
Apricus ETC-30 evacuated tube solar collectors are ideal for solar hot water systems. The Apricus ETC-30 collector is designed to be used in a wide variety of solar thermal (heat) applications in almost any climate. The evacuated tube and heat pipe technology provides very efficient and reliable solar thermal production in a simple to install ...
-
Manufactured by Heliodyne, Inc.based in USA
The Heliodyne Warm Climate packaged system is an excellent choice for regions where freezing or water quality is not a major concern. In this open loop design, water is circulated directly from the solar collectors to the storage tank. Our warm climate packages are built efficiently and economically, offering you an affordable alternative when it comes to solar water ...
-
based in UNITED KINGDOM
Puf - Insulated Tank New, innovative Tank shape Unique Tank & Collector support structure Sacrificial Anode to prevent galvanic corrosion Ultrasonic Welding of Collectors for Superior Conductivity 3 Dimensional Polymer End Cap Unique “Anti Condensation” device Available in capacities of 100, 200 and 300 ...
-
Manufactured by Heliodyne, Inc.based in USA
The new GOBI has undergone a complete transformation for 2011 making it the industry’s best flat plate collector. By redesigning the frame and incorporating state of the art components, the GOBI has a reduced profile and even better performance. With 3 sizes and 2 absorber surface types to choose from, there is a GOBI collector for every type of solar water heating ...
-
based in USA
Renewable Energy Consulting and Services is committed to providing our customers with significant energy savings through solar technology. The market for solar power is expanding exponentially. Federal solar investment tax credits, state incentives, along with rising natural gas prices and electric rates are fueling this industry growth. Switching to solar energy is one of the most meaningful ...
-
Manufactured by Heliodyne, Inc.based in USA
Water and space heating combination systems provide the greatest efficiency maximizing the most from the sun. With the combined approach, any heat not used for hot water consumption is automatically diverted for space ...
-
based in USA
Solar Collectors: There are two major components to a solar hot water system. The first is the solar collector. The collector is usually installed on a roof facing the sun. Running through the collectors are copper tubing, filled with water that during the day absorb energy from the ...
-
Manufactured by AIC Inc.based in CANADA
JAD shell & coil heat exchangers are distinctly characterized by their angular connections, and by the concentric layers of helically corrugated tubes within the shell. This unique design optimizes the performance and heat transfer efficiency of the units. This line of heat exchangers is primarily designed for vertical installations and combined with their compact size, the JAD heat ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you