Photovoltaic Mounting (Solar Mounting) Equipment
-
Manufactured by HAMAK Technology L.L.C.based in TAIWAN
Specialized for different types of standing seam roof. No roof penetration, no problem in leaking proof. High holding forces with stainless steel screws. Installation is easier and faster, saving both time and ...
-
Manufactured by HAMAK Technology L.L.C.based in TAIWAN
Specially designed for large-scale PV plant, suitable for both screw pile and concrete base. Longer rail span help to reducing the material cost and saving installation time. Patented rail connector simplifies the cross connection and splice ...
-
Manufactured by HAMAK Technology L.L.C.based in TAIWAN
Suitable for universal frame consisting of H-, C-beams or square pipes. Installation is easier and faster, saving both time and ...
-
Manufactured by HAMAK Technology L.L.C.based in TAIWAN
Fastening sets consisting of a special h-shaped bracket, module height adjustable. Suitable for universal corrugated and trapezoidal metal roofs. The Unique domed washer molds to form a leak proof seal. Price advantage due to special design for quick ...
-
Manufactured by HAMAK Technology L.L.C.based in TAIWAN
The product adopt the structural design of the viaduct, suitable for dome or parking spaces. The waterproof treatment are customize, suitable for frameless and frame solar panels. Large span designation between extrusion tube and the foundation pile, save install wages. The main extrusion tube and cross tube used in connectors, easy installation. The main connection extrusion tube screwed with ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
Our company has been one of the most successful German suppliers of PV mounting systems on the ground-mounted market for many years. However, our C and U profiles made of high-alloy steels with the characteristic rows of holes have not only been used "in the field" over the years. In fact, we have been able to realize a number of ...
-
Manufactured by S:FLEX GmbHbased in GERMANY
The advantages of the S:FLEX insertion system at a glance: Can be installed as a PV facade system or used on noise barrier walls and solid balustrades on balconies. Components for a special look also available in black. Suitable for module frame heights of 25 to 45 mm - using just one type of insertion rail. Thanks to the hollow chamber profile, the rail has a very high static load-bearing ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
Incorrectly installed support systems can cause damage to the sensitive roof cladding. The result is moisture damage inside the building as well. In order to optimally protect the roof cladding, the mounting racks we install are always placed on weather-resistant building protection mats. The triangular constructions pre-assembled on the ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
The two-support system is a very cost-efficient solution with two vertical columns and additional bracing by a diagonal strut. Instead of one or two solid supports without additional bracing, this system creates a flexurally rigid truss via the diagonal. This has equivalent load-bearing properties while using less material. Furthermore, the bearing forces on the ground are significantly reduced, ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
The photovoltaic mounting system consists of only one support and a diagonally running strut and can be used worldwide. As with the other systems, the module type and arrangement can be freely selected. A characteristic feature of the system is the deliberate omission of further supports. The solution is particularly suitable for very ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
Orienting the modules to the east and west can make economic sense if the following applies to the planned photovoltaic system: North-south oriented systems can shade each other and must therefore be installed with sometimes quite large row spacing. This effect does not occur with an east-west arrangement: The row spacing can be ...
-
Manufactured by Profilodomibased in GREECE
Mounting System PD.4I.2P on a single driving pile with 2 panels portrait for open field areas. One IPE120 steel beam driving pile, Hot-Dip Galvanized, All parts are made of high strength galvanized steel. Strong rafter with 3 points of support Diagonal braces. Clamps are made of stainless steel. Wind Resistibility: Up to 33m/sec ...
-
Manufactured by Corab S.A.based in POLAND
Corab WS-024R is one of the options of universal WS-024 system, adapted to modules with a width of 990-1149 mm and a height of 1650-2220 mm. WS-024R is fixed to the ground with a system of hammered pipes without any special equipment. Made of high quality Magnelis steel. It comes in three varieties that differ in the method of fixing to the ...
-
Manufactured by Aerocompact GmbHbased in AUSTRIA
The demand for ground mounted photovoltaic systems have changed. Due to falling prices of solar modules; land, assembly and installation costs currently make up a larger share of the overall system costs. This results in tighter and denser module layouts; the horizontal alignment of modules is preferred in order to reduce losses from the ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
be used in all system variants from single-support systems to east-west systems. Thin-film or crystalline modules can also be used. Mounting is done by means of the usual standard fastening. There are no additional costs for our customers when using ...
-
Manufactured by Premium Mounting Technologies GmbH & Co. KGbased in GERMANY
As a photovoltaic mounting system, PMT EVO 2.1 EW is the best solution for flat roofs with an east-west elevation of the modules. With PMT EVO 2.1, PMT focuses on safety and quality as well as short installation time and cost ...
-
Manufactured by Premium Mounting Technologies GmbH & Co. KGbased in GERMANY
The innovative, pre-assembled solution with high installation friendliness and maximum reliability: As a photovoltaic mounting system, PMT EASY is the prerequisite for efficient and safe installation of solar modules on flat ...
-
Manufactured by Premium Mounting Technologies GmbH & Co. KGbased in GERMANY
As a photovoltaic mounting system, PMT EVO 2.1 EW is the best solution for flat roofs with an east-west elevation of the modules. With PMT EVO 2.1, PMT focuses on safety and quality as well as short installation time and cost ...
-
Manufactured by Bisol Group, d.o.o.based in SLOVENIA
Simply use the EasyTool, a project and design tool to plan your solar power plant in detail with your wishes and needs in ...
-
Manufactured by Xiamen Starwin Solar Technology Co.,Ltdbased in CHINA
Starwin solar is provider of solar mounting stystem in China. Ground solar mount bracket systems are typically assembled from anodized aluminum, steel or aluminum and steel components, usually assembled from hot-dip galvanized or stainless steel hardware. Ground Solar PV Mounting Structures highly engineered solution which can effectively ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you