Only show results available in Connecticut? Ok

Solar Photovoltaics Applications

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Premium

    Chemical Analyzing in Photovoltaics for the Solar Power Industry

    In the earlier days, the chemistry involved in solar cell manufacturing was relatively simple, using commodity chemicals. With cell efficiencies continuously on the rise and new cell concepts slowly being introduced with increased speed of processing, precise chemical concentration control is becoming crucial to obtain consistency and more cost-effective manufacturing of solar panels. This is possible by monitoring on-line the etching bath composition, a small but genuine step forward in your competitive advantage....

    By AppliTek NV based in Nazareth, BELGIUM.

  • Waste gas & wastewater treatment for the solar industry

    Generating solar energy is considered `green technology`, even though the production of solar cells based on silicon predominantly uses process stages that have been common practice in the semiconductor industry for many years. As in the semiconductor industry the production of solar cells employs dangerous and environmentally harmful substances, which require abatement according to legal provisions. The production of photovoltaic cells therefore is subject to strict requirements for treatment of waste gases and...

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Energy Storage

    The K&S Engineering company as a technology 'know-how' supplier has prepared algorithms for optimizing energy storage systems and developed a new simulation tool for it. Using this special simulation software, not only the major yield forecasts for the investors are done in detail, but it is also possible for the applied control algorithms to perform optimizations. With this, K&S offers a consultancy service combining photovoltaic-energy-storage-system design and the perfectly match of the upcoming control...

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Supervision of Photovoltaic Power Plants in Japan

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible...

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Photovoltaic power solutions for the wind power case sector

    Photovoltaic power solutions for the wind power case sector.

    By Anhui Leiton Electric Technology Co., Ltd. based in Hefei, CHINA.

  • TESTS ON THE FIELD FOR PV PLANTS

    There is no legislation to control of the proper functioning of pyranometers used to measure solar radiation installed in the PV field. The control can be effectively carried out with portable instruments suitable to avoid uninstalling pyranometers set in areas normally inaccessible as placed at the side of panels. A quick test on the field assesses whether a good maintenance is sufficient to obtain a reliable measurement of the solar radiation or if it is necessary to send radiation sensors to the manufacturer...

    By Delta OHM - member of the GHM GROUP based in Caselle di Selvazzano, ITALY.

  • Integrated real-time gas analysis solution for solar PV industry

    Solar technology as a renewable energy technology is spreading around the world, with major manufacturing operations occurring in China, Germany, Spain, and the U.S. For solar photovoltaics, specialty chemicals are required for the production of the photovoltaic materials.

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

  • Adhesive technology solution for renewable energies industry

    The debate around the phase-out of nuclear power has highlighted it once again: there`s no getting away from renewable energy. Improvements in efficiency and performance are the challenges that manufacturers must now face. And it is precisely here that the innovative adhesive technology from Lohmann plays an important role. The more reliably and efficiently components are connected, the longer-lived and more economical the overall system is – irrespective of whether energy is obtained from solar systems or...

    By Lohmann GmbH & Co.KG based in Hebron, KENTUCKY (USA).

  • Thin Film Photovoltaic Applications

    Silver-filled, electrically conductive epoxy adhesives are used to bond coated copper ribbon on rigid and flexible substrates such as glass or stainless steel foil. Adhesives are well suited for highly reliable bonds to most TCO´s, low-temperature silver pastes, and metallic contact surfaces such as Mo, NiV, or Ag. Because of the miniscule amounts of SoltaBond adhesive needed in automated high-speed production processes, total costs are kept low. Most Thin Film PV companies in the world, that are use...

    By SoltaBond GmbH based in Karlsbad, GERMANY.

  • Industrial solutions for remote monitoring

    Supervision and maintenance on those locations without internet wired connection requires high personnel cost and also means a slow reaction in case of malfunction events and alarms. For companies with a big amount of remote location centers (such as repeaters of operators and telephone companies, production and distribution centers for energy manufacturers or photovoltaic/eolic plants), maintenance and supervision labors involve disproportionately high costs.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Photovoltaic power solutions for the Solar Case sector

    Photovoltaic power solutions for the Solar Case sector.

    By Anhui Leiton Electric Technology Co., Ltd. based in Hefei, CHINA.

  • Photovoltaic Plant Monitoring

    By Nethix S.r.l. based in Castelfranco Veneto (TV), ITALY.

  • Metrology for the photovoltaics industry

    Quality control to maximize efficiency is critical in the competitive photovoltaic industry. For some time solar texture has been thought to qualitatively affect solar cell efficiency. However, through large-area, 3D measurements and areal feature parameters, quantitative correlation of texture to efficiency has only recently been obtained. We now know that ISO 3D surface parameters linearly correlate with solar cell efficiency.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • solar cell tester,solar module tester,EL tester

    Our main products includes: Solar Cell Tester, Auto Solar Cell Tester, Solar ModuleTester, Auto Online Solar ModuleTester, Solar Module EL Tester, Auto Online Solar Module EL Tester, Solar Simulator and related test equipment.

  • Evaporation technology for photovoltaic & microelectronics industries

    The manufacturing process of the cells that make up the photovoltaic systems and the printed circuits require water in quantity and high quality. This water has to be managed wisely so as not to affect the productivity and the expenses of the plant.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Instruments and analyzers for PV site solar monitoring

    PV performance measurements under real outdoor conditions are done in may different ways. However, the concept of all performance investigations is to relate the input energy, which is the solar radiative flux, to the output energy, which is the electrical power produced by the PV module. EKO’s Solar Monitoring Stations, referred to as SMS, is the dedicated facility for this type of evaluation.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you