Photovoltaic Testing (Solar Photovoltaics) Equipment
-
Manufactured by Spitzenberger & Spies GmbH & Co. KGbased in GERMANY
, thermal characteristic and course-of-the-day of the irradiation. Evaluation of the static and dynamic efficiency with very precise MPP tracking simulation. Fully compliant testing according to the IEC/EN 50530. Standard Version up to 950V. Low-Voltage Version up to 150V, Micro-Inverter. NEW: High-Voltage Version up to 1500V available. ...
-
Manufactured by Shanghai Linpin Instrument Stock Co Ltdbased in CHINA
Lenpure Walk-in temperature humidity Photovoltaic module test Chambers is mainly used for the photovoltaic industry, the ground with crystalline silicon photovoltaic modules, the ground with a series of thin film PV modules and other photovoltaic components for high temperature, low temperature, alternating wet ...
-
Manufactured by KOMEG Technology Industrial Co., Ltd.based in CHINA
SPECIFICATIONS   Temp. range Maximum:80ºC,120ºC;Minimum:-60ºC,-50ºC,-40ºC,-30ºC,-20ºC,-10ºC,0ºC Humidity Range 10%,20%,30%~95% Temp. constancy ±0.5ºC Humidity constancy ±2.5%R.H Temp. uniformity ±2.0ºC Humidity uniformity ±5.0%R.H Heat up time +20ºC~+80ºC ,Within 60 min Pull down time +20ºC~-55ºC -40ºC-20ºC-10ºC ,Within 120 or 90 or 60 min Interior material Stainless Steel Plate(SUS 304) ...
-
Distributed by Merconics GmbH & Co. KGbased in GERMANY
The Atonometrics Continuous Solar Simulator and Light Soaking Chamber provides simulated sunlight exposure for steady-state testing of photovoltaic (PV) modules. The system can be used for various tests requiring medium or long-term exposure, including photo-induced degradation, power output stabilization, hot-spot testing, and ...
-
Manufactured by Spitzenberger & Spies GmbH & Co. KGbased in GERMANY
Very fast slew rate >52V/µs at 230Vrms as required by IEC/EN 61000-4-11. Operates from DC up to 5kHz large signal bandwith (-3dB) optional up to 30kHz. Small signal bandwith up to 100kHz. High long-term (1 hour) overload characteristic. High short-term (5-10 min) overload characteristic. Very high peak load ability (up to 5ms). Very low internal ...
-
Manufactured by Spitzenberger & Spies GmbH & Co. KGbased in GERMANY
In the event of switching off or loss of function of the supervising supply network, islanding networks can appear. Within these the local generator is still driving the supply voltage and supplying the network connected loads without any monitoring and supervision of voltage level and waveshape and frequency of the power supply companies. ...
-
Manufactured by Spitzenberger & Spies GmbH & Co. KGbased in GERMANY
Due to the climate change the use of regenerative energy sources is promoted increasingly. The use of solar energy is becoming more and more important. The ideal test system for solar inverters consists of a photovoltaic solar cell simulator (PVS), a mains supply system simulator (DM 90000/PAS) and a power recuperation unit (PRU) which ...
-
Manufactured by Spitzenberger & Spies GmbH & Co. KGbased in GERMANY
Consumes the generated power of the solar inverter and feeds it back into the mains. Reduces the heat exhaustion and therefore the power losses of the system. Increases the sink power capability up to 6 times the nominal value. Without influencing the simulated ...
-
Manufactured by OAIbased in USA
OAI offers a complete line of I-V Testers. Every I-V Tester can be ordered as a stand-alone system or integrated into any of the TriSOL Solar Simulators. Three standard ranges of I-V Testers are available; 1A and below, 1 to 5A, and 5 to 10A. Higher current testers are available as custom options. An OAI Application Engineer will work with you to insure that the I-V Tester you choose is optimized ...
-
Manufactured by OAIbased in USA
OAI's TriSOL Solar Light Meter is an essential measurement tool for measuring the irradiance in "suns" of both Flash and Continuous Wave Solar Simulators. OAI's instruments have unique features not found in other Solar Light Meters. This versatile meter can display reference cell characteristics, including cell type, window type, cell size, and temperature measurement device type. The OAI Solar ...
-
Manufactured by OAIbased in USA
OAI offers a complete line of I-V Testers. Every I-V Tester can be ordered as a stand-alone system or integrated into any of theTriSOLSolar Simulators. Three standard ranges of I-V Testers are available; 1A and below, 1 to 5A, and 5 to 10A. Higher current testers are available as custom options. An OAI Application Engineer will work with you to insure that the I-V Tester you choose is optimized ...
-
PremiumManufactured by Aralabbased in PORTUGAL
Climatic and thermal chambers, from reach-in dimensions to walk-in chambers for testing photovoltaic solar panels in compliance with iec standards 61215 / 61646 / 62108 and en 12975-1 / ...
-
Manufactured by Freese Enterprises Inc.based in USA
Freese Enterprises (FEI) can create custom solar/photovoltaic test equipment using the various types of PV test and measurement instrumentation from our industry leading partners such as Agilent Technologies. The goal of achieving ever increasing solar cell efficiency and reduced cost demands accurate, repeatable, fast, and reliable ...
-
Manufactured by Shenzhen Xinhonghua Solar-Energy Co.,Ltdbased in CHINA
; Polycrystalline silicon photovoltaic cell. Test Condition: AM 1.5, 1000W/M2, ...
-
by IPTEbased in BELGIUM
The IPTE flash solar simulator is designed to test photovoltaic devices up to 6” x 6” size. A Current-Voltage (I-V) measurement system for use in both in-line high volume production and off-line quality control environments is available. The IPTE flash solar simulator utilizes a heavy duty xenon flash lamp and AM1.5G calibrated ...
-
Manufactured by Atonometrics, Incbased in USA
Our UV Exposure System provides ultraviolet (UV) light exposure for accelerated life testing of photovoltaic (PV) modules. The system can be used for UV pre-conditioning required by IEC 61215 and 61646 for PV module testing. A unique design with two large vertical test planes allows for the simultaneous exposure of 2 to 6 PV ...
-
Manufactured by EA Elektro-Automatik, Inc.based in USA
on competing benchtop supplies. Most of the PS / I family of programmable dc power supplies come standard with an arbitrary waveform function generator, swappable digital interface control and built-in test routines for battery test, photovoltaic simulation and MPP tracking, to name a few. ...
-
Manufactured by Atonometrics, Incbased in USA
The Atonometrics Continuous Solar Simulator and Light Soaking Chamber provides simulated sunlight exposure for steady-state testing of photovoltaic (PV) modules. The system can be used for various tests requiring medium or long-term exposure, including photo-induced degradation, power output stabilization, hot-spot testing, and ...
-
Manufactured by Endeas Oybased in FINLAND
We can design customized PV testing solutions tailored for your ...
-
Manufactured by HT Italia S.r.L.based in ITALY
Multifunction instrument for testing and verifying single-phase PV installations. SOLAR I-V has been designed to meet any requirement of photovoltaic installation testers. Further to providing the possibility of testing and measuring the efficiency of single-phase photovoltaic systems and also measures the I-V characteristic both ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you