Only show results available in Virginia? Ok

thin-film photovoltaic (Solar Photovoltaics) equipment

  • Model TYN‐125P6 - High Quality Poly‐Crystalline Photovoltaic Module

    Bypass diode minimizes the power drop by shade.The conversion efficiency of solar cell is above 14.25%.White tempered glass, EVA resin, weather proof film and anodized aluminum frame to provide efficient protection from the severest environmental conditions. Waterproof (UL94, V‐O ). Perfect for grid applications.  Product guarantee 5 ...

    By Tynsolar based in Hsinchu City, TAIWAN.

  • Model RS-16(RS-16-7) - Polysilicon Solar Cells

    Format 156mm×156mm±0.5mm Thickness 220µm±30µm,200µm±30µm 2. High efficiency in photovoltaic conversion16.2%~17.1% 3. Low inverse current, high shunt resistance and high dependability 4. Front side: covered by dark blue silicon nitride anti-reflection film with good passivation, in homogenous color ...

    By Jiangxi Risun Solar Energy Co., Ltd based in Xinyu, CHINA.

  • Model TYNP62409115 - High Quality Poly-Crystalline Photovoltaic Module

    Bypass diode minimizes the power drop by shade.The conversion efficiency of solar cell is above 13.25%.White tempered glass, EVA resin, weather proof film and anodized aluminum frame to provide efficient protection from the severest environmental conditions. Waterproof (UL94, V-O ). Perfect for grid applications. Product guarantee 5 years.

    By Tynsolar based in Hsinchu City, TAIWAN.

  • Photovoltaic doping tool with or without preheater

    You have the task to reliably dope your thin film semiconductor layer? Whether you are building CIS, CIGS or CdTe panels, look no further, all4-PCB gives you the tool to do this. Their contactless coaters can be used in R&D, pilot lines and full production.

    By all4 - GP (North America) Inc based in Glendale, CALIFORNIA (USA).

  • Thin Film Substrate Materials

    Kapton® High Performance Flexible Films for Photovoltaic Substrates. Kapton® polyimide film-based substrates enable module manufacturers to realize the potential of roll-to-roll thin film flex CIGS PV on a commercial scale.

    By DuPont Photovoltaic Solutions based in CALIFORNIA (USA). from Thin Film Substrate Materials Product line

  • Photovoltaic Modules

    Photovoltaic - using the power of the sun is for cool customers. The sun is hard to beat as a sour­ce of en­er­gy. So­lar en­er­gy is cle­an, safe and in­ex­haus­ti­ble. Pho­to­vol­taic mo­du­les from VTA So­lar Sys­tems con­vert the power of the sun into electri­cal ...

    By VTA Austria GmbH based in Rottenbach, AUSTRIA. from Photovoltaic Modules Product line

  • Photovoltaic Cell

    The conversion of solar radiation into an electron current takes place in the photovoltaic cell, a device consisting of a thin sheet of semiconductor metal, very often made of suitably treated silicon.This treatment is characterised by various chemical processes including so-called 'doping'.Adding impurities, that is atoms of boron and ...

    By Enerpoint S.p.A. based in Nova Milanese (MB), ITALY.

  • Model DMS-125M-280 - 5" Monocrystalline Solar Cell

    DMS-125M-280: 100 Cells, up to 280W. High efficiency and stable performance in photovoltaic conversion. Advanced diffusion technique ensuring the homogeneity of energy conversion efficiency of the cell. Advanced PECVD film forming, providing a dark blue silicon nitride anti-reflection film of homogenous color and attractive appearance. High ...

    By Dmsolar, LLC based in Fort Lauderdale, FLORIDA (USA). from 5" Monocrystalline Solar Cell Product line

  • NovoVellum - Model HiPo FW01 - Thin Film Photovoltaic Modules

    This EVA series product line is formulated for specific thin film photovoltaic modules. The EVA is formulated with a UV stabilization system, a bonding system and a stable and fast curing system. They are a proven solution for high quality module manufacturing offering high light transmission and delivering outstanding photo-thermal stability. ...

    By NovoPolymers NV based in Puurs, BELGIUM.

  • PHOTOCAP - Model FC280P/UF - Ultra-Fast Cure EVA

    Photocap FC280P/UF is a fast cure EVA (ethylene vinyl acetate copolymer) photovoltaic encapsulating film material. Photocap FC280P/UF has similar cure kinetics, but with improved photo-thermal stability relative to Photocap 15295P/UF. Photocap FC280P/UF is available only in Asia. Photocap FC280P/UF can be used for all crystalline silicon ...

  • PHOTOCAP - Model 15455P/UF - Mega-Fast Cure EVA

    Photocap 15455P/UF is a mega-fast cure EVA (ethylene vinyl acetate copolymer) photovoltaic encapsulating film material with yet faster curing kinetics relative to Photocap 15420. Module lamination time can be reduced by at least 50% relative to standard cure encapsulants. Photocap 15455P/UF can be used for all crystalline silicon photovoltaic ...

  • PHOTOCAP - Model 25539P - Thermoplastic

    Photocap 25539P is a new thermoplastic encapsulant intended for thin film PV modules on the back-side of the device. Retention of glass adhesion and photo-thermal stability is comparable to other Photocap products. Photocap 25539P has lower moisture absorption and optical transmission relative to EVA based encapsulants. Photocap 25539P can be used ...

  • NovoVellum - Model FC05 - Crystalline Silicon and Thin Film Photovoltaic Modules

    The EVA series product line is formulated for all crystalline silicon and thin film photovoltaic modules. The EVA is formulated with a UV stabilization system, a bonding system and a stable and fast curing system. It is the proven solution that is widely accepted as a standard encapsulating method in the PV industry. NovoVellum FC05 is a 28% VA ...

    By NovoPolymers NV based in Puurs, BELGIUM.

  • PulseForge - Model 3300 - Semiconductor and Photovoltaic Materials Processing

    The PulseForge 3300 is designed to process higher melting point materials, such as silicon, zinc oxide, ITO, ceramics and CIGS, used for printed logic, display, and photovoltaic applications. The tools create the very high processing temperatures required for recrystallization and annealing, but without damaging low - temperature materials like ...

    By NovaCentrix based in Austin, TEXAS (USA). from Semiconductor and Photovoltaic Materials Processing Product line

  • PHOTOCAP - Model 15585S HLT - Photovoltaic Encapsulating Film Material

    PHOTOCAP 15585S HLT is an ultra fast cure and PID resistant EVA (ethylene vinyl acetate copolymer) photovoltaic encapsulating film with HLT higher light transmission in the UV wavelength region to allow greater power generation with blue light sensitive photovoltaic devices.

  • Model TYNS62409130 - High Quality Mono-Crystalline Photovoltaic Module

    Bypass diode minimizes the power drop by shade.The conversion efficiency of solar cell is above 15.25%.White tempered glass, EVA resin, weather proof film and anodized aluminum frame to provide efficient protection from the severest environmental conditions. Waterproof (UL94, V-O ). Perfect for grid applications. Product guarantee 5 years.

    By Tynsolar based in Hsinchu City, TAIWAN.

  • Solar Modules

    Solar modulesAre made up of solar cells that transform sunlight into electrical energy. transform light in to electrical energy. They are made up of individual solar cellsTransform sunlight into electrical energy. Irradiation causes the release of positive and negative charges which creates environmentally friendly energy. Over 80% of solar ...

    By IBC SOLAR AG based in Staffelstein, GERMANY.

  • Model TYN‐115S6 - High Quality Mono‐Crystalline Photovoltaic Module

    Bypass diode minimizes the power drop by shade.The conversion efficiency of solar cell is above 13.75%. White tempered glass, EVA resin, weather proof film and anodized aluminum frame to provide efficient protection from the severest environmental conditions. Waterproof (UL94, V‐O ). Perfect for grid applications. Product guarantee 5 years

    By Tynsolar based in Hsinchu City, TAIWAN.

  • Model D6F - Mono-crystalline Photovoltaic Cell

    A full range of cell processing, including.Mono- and Multi-crystalline Silicon-based cells.6 inch cell size with 3 busbars.Wafer thickness of 180 to 200 μm.High efficiency and thin wafer handling capabilities.Dynamic optimized setting system.Soft-touch wafer handling system.Robust-in-house automation systems.Improved quality, efficiency and ...

    By DelSolar Co., Ltd based in Zhunan Township, TAIWAN.

  • UniSolar EnerGen - Thin-film Photovoltaic Module

    A breakthrough in the roofing industry, the EnerGen™ system from CertainTeed features integrated UNI-SOLAR® thin-film photovoltaic laminates that seamlessly integrate with traditional asphalt roofing shingles and provide utility savings for homeowners. The lightweight and aesthetic design requires no rooftop penetrations, ...

    By United Solar Ovonic based in Rochester Hills, MICHIGAN (USA). from Thin-film Photovoltaic Module Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you