Solar Thermal Equipment For Solar Energy In USA
-
Manufactured by Apricus Solar Co. Ltdbased in CHINA
The Apricus PV-ETC20-200 solar system is designed to use free solar energy only. It can be applied for a wide variety of solar thermal (heat) applications in almost any climate. This system provides a complete package of 200L solar hot water heating solution, which technology provides very efficient and reliable solar hot water in a simple installation design. ...
-
Manufactured by Atlantis Solarbased in USA
Atlantis Solar provides high quality copper tube, aluminum framed flat plate thermal solar collectors, and rack systems. You are guaranteed 100% durability with high quality thermal solar energy. The special module installation system is easy to mount on both flat and sloped roof, realizing the perfect integration between buildings and collectors, also meeting the demand of heat ...
-
Manufactured by LightManufacturingbased in USA
The LightManufacturing H1 heliostat delivers over 1300 watts of energy to a target or over 150,000 lumens for lighting applications. The H1 offers the lowest cost-per-reflected watt of any commercially available heliostat. ...
-
Manufactured by NEM HRSGsbased in NETHERLANDS
The receiver is the main thermal equipment of a Solar Tower power plant. Its panels collect the reflected sun light from the heliostats of the solar field. The thermal energy of the sunlight is transferred to a heat transfer fluid (water/steam or molten salt). The receiver is placed on top of a steel or concrete tower. There are two kind of receiversystems, direct steam (water is heated until ...
-
Manufactured by Clean Energy Systems, Inc. (CES)based in USA
The Clean Energy Systems reheat combustor, or reheater, dramatically improves the efficiency of combined steam and gas turbine power cycles by boosting the drive gas to turbine inlet temperatures typically associated with gas turbines and even beyond. The principles behind the reheater are essentially the same as applied in the CES drive gas generator but exchanging water with steam as ...
-
Manufactured by Saint-Gobain Performance Plasticsbased in USA
Polyimide Films provide excellent electrical, thermal, physical and chemical properties over a wide temperature range in a lightweight package (136 sq ft/lb [28 m2/kg] for 1 mil) making them superior for electrical insulation applications. CHEMFILM® polyimide films are produced in a world-class process that makes them dimensionally stable and inherently isotropic, meeting exacting tolerances, ...
-
Manufactured by YSI Incorporated - a Xylem brandbased in USA
This precision Solar Radiation sensor or pyranometer includes a bubble level, leveling screws and mounting hardware for easy installation. Global Water"s Solar Radiation sensors use a high stability silicon photovoltaic (PV) detector (blue enhanced) to obtain accurate readings. The solar radiation sensors are attached to 25 ft of marine grade cable, with lengths up to 500 ft available upon ...
-
Manufactured by DMT GmbH & Co. KGbased in GERMANY
Smart Inspection & Monitoring (SIM) is an innovative, digital overall concept for determining service life and inspection intervals for plant components, consisting of damage tolerance methodology, engineering services, online monitoring and approval ...
-
Manufactured by Caleffi S.p.a.based in ITALY
The iSolar WMZ is an intelligent kWh (Btu) energy heat meter with data connection for solar thermal systems and conventional heating (or cooling) ...
-
Manufactured by Artic Solar, Incbased in USA
The XCPC pairs a custom evacuated tube solar collector with an external non-imaging reflector in a non-tracking, roof or ground mountable system. This combination enables the XCPC East/West design to cost effectively achieve temperatures in excess of 200°C at more than 50% efficiency – which current market incumbents cannot attain without tracking. Efficiency is defined here as the ...
-
Manufactured by ATAS International, Inc.based in USA
ATAS International has been manufacturing solar air heating metal panels since 2001. ATAS International manufactures InSpire, the most efficient unglazed solar air heater on the market. We have now developed a ground-breaking, low-emissivity surface, called InSpire HP. In 2020-2021, various projects totaling more than 30,000 sq.ft. of panels were installed and closely monitored for performance. ...
-
based in USA
Istec’s BTU Meter measures the total energy used or transferred in a liquid system. BTU’s are calculated by multiplying the system temperature difference by the flow rate. The Model 4440 BTU Meter is an ideal choice for applications requiring a simple, compact and cost effective ...
-
Distributed by SunChiller Incbased in USA
SunChiller solar cooling systems efficiently and reliably utilize solar energy to produce chilled water by integrating solar thermal collectors, insulated thermal storage tanks and absorption chillers. Systems with this combination of mature technologies have been successfully deployed worldwide for decades. Facilities already equipped with chilled water distribution system are good ...
-
based in USA
Our modular thermal energy storage turns solar and wind energy into round-the-clock heat and power. ...
-
Manufactured by Apricus Solar Co. Ltdbased in CHINA
Apricus ETC-20 evacuated tube solar collectors are ideal for solar hot water systems. The Apricus ETC-20 collector is designed to be used in a wide variety of solar thermal (heat) applications in almost any climate. The evacuated tube and heat pipe technology provides very efficient and reliable solar thermal production in a simple to install ...
-
Manufactured by PermaCity A division of Catalyzebased in USA
We are a power dependent culture and that mode of existence is not changing. To survive buildings must waste nothing and gain everything from naturally occurring resources. Heating, cooling, cooking, fuel for your vehicle, and power from your home is generated locally and exported whenever ...
-
Manufactured by Bitimec Wash-Bots, Inc.based in USA
The Roboklin 25 is designed to wash large ground mount PV panel arrays affordably. It is ideally positioned to help O&M’s optimize their return on multi-million dollar plant investments. With a wash speed of 80 feet (25 meters) per minute and four brushes from 6′ to 13’9″ in length, one operator can effortlessly wash 12,000 solar panels per 8 hour shift, with only ...
-
Manufactured by Viking Cold Solutions, Inc.based in USA
Solar energy is, by some studies, the cheapest form of electrical energy generation, as well as the cleanest, delivering exceptional benefits for both the planet and for businesses. Yet, in order to maximize the return on solar requires an efficient way to store that energy and flexibility for its future ...
-
Manufactured by Saint-Gobain Performance Plasticsbased in USA
Chemfilm MR is a family of films combining the chemical inertness and universal non-stick properties of PTFE polymers with maximum conformability and heat resistance. Compare the data for CHEMFILM® MR versus other materials typically used in composite fabrication in order to understand its superior performance, particularly for complex shapes and high temperature ...
-
Manufactured by CertainTeed Corporationbased in USA
CertainTeed Flintlastic® SA roofing membrane is a premium, self-adhering SBS modified bitumen roofing material suitable for use in accordance with CertainTeed specifications for most low-slope roof system applications. Flintlastic SA Cap is available in 6 colors plus white to complement the most popular CertainTeed shingles. Flintlastic SA Cap white meets or exceeds ENERGY STAR requirements ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you