Solar Thermal Equipment For Solar Energy
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
Large solar thermal plants in modular construction can be used individually and cover the specific heat requirement completely or partially with economy-friendly solar energy. Complete systems for hot water and heating support. Pre-assembled system solutions for domestic properties, sports centers, fitness studios, hotels and spa facilities. Ready-to-connect modules measuring 35 sq. m to 220 sq. ...
-
Manufactured by Greentek India Pvt ltdbased in INDIA
The evacuated tube solar thermal system is one of the most popular solar thermal systems in operation. An evacuated solar system is the most efficient and a common means of solar thermal energy generation with a rate of efficiency of 70 per cent. As an example, if the collector generates 3000 kilowatt hours of energy in a year then 2100 kilowatt hours would be utilized in the system for heating ...
-
Manufactured by Wolf GmbHbased in GERMANY
With the BWL-1-I heat pump for internal installation you can utilise nature's energy and yield up to 80 % of your heating energy from the environment, free of ...
-
Manufactured by Solimpeksbased in TURKEY
Almeco - Tinox highly selective aluminum. Rock wool insulation. Copper pipe. Ultrasonic welding. Low iron tempered glass. Horizontal System. 10 years ...
-
Manufactured by ADES-Tempero Groupbased in SPAIN
The polygeneration seeks to obtain a continuous supply of electrical energy depending on the energy sources availability and maximum fuel economy. An intelligent system prioritizes most suitable energy source at all ...
-
Manufactured by Sunerg Solar Energy S.R.L.based in ITALY
Flat solar collector BLUh+/BLUhx+ Sunerg model EN 12975, CE, Solar Keymark, KIWA certificated and with following characteristics: gray painted aluminum section case with 45 mm rock wool thermal insulation. Solar plate with 22 mm diameter pipes absorber plate with highly selective titanium treatment and laser welding. Low iron, tempered ...
-
based in GREECE
Synchronization of heat availability (e.g. waste or solar heat) and thermal processing production needs, is usually an uneasy puzzle to solve. Low cost & high efficiency heat storage in most such cases, remains the key in order to utilize large quantities of available -otherwise wasted- heat in a (pre)production process. PCM (Phase Change Materials) TES (Thermal Energy Storage) tanks or ...
-
Manufactured by Unique Solar Systembased in INDIA
Solar water heating is the conversion of sunlight into heat for water heating using a solar thermal collector. A variety of configurations is available at varying cost to provide solutions in different climates and latitudes. SWHs are widely used for residential and some industrial ...
-
Manufactured by Kemal Paralik Metal Isleri Ltd.based in TURKEY
Dimensions: 97 cm X 198 cm X 8 cm. Glass: 4 mm Prismatic. Internal Structure: 12 Aluminium Tubes. Gross Surface: 2.00 m2. Weight: 41 kg.. Operating Pressure: Max 3 Bars. Trial Pressure: 5 Bars. External Case: Embossed Sheet. Insulation: Glasswool. Absorber Liquid Capacity: 6.0 lt. Ø Inlet / Outlet: ...
-
Manufactured by Solartron Energy Systems Incbased in CANADA
The 7 meter hybrid parabolic solar concentrator (solar dish) continuously tracks the sun throughout the day using a dual axis tracker enabling the system to harvest maximum solar energy from early sunrise to late sunset. Most solar concentrator tracking technologies use an actuator for vertical tracking. The 7 meter solar concentrator uses a slew drive instead of an actuator for rock-solid ...
-
Manufactured by TYFOROP Chemie GmbHbased in GERMANY
TYFOCOR LS is a special, ready-to-use, almost completely vaporizable, propylene-glycol-based heat transfer fluid for use in solar systems that are subject to extreme thermal ...
-
Manufactured by Kemal Paralik Metal Isleri Ltd.based in TURKEY
Dimensions: 93 cm X 173 cm X 8 cm. Glass: 4mm Prismatic. Internal Structure: 8 galvanized flowing tubes. Gross Surface: 1.60m2. Weight: 46 kg.. Operating Pressure: Max 4 Bars. Trial Pressure: 6 Bars. External Case: Galvanized Sheet with Electrostatic Powder Paint. Insulation: Glasswool. Absorber Liquid Capacity: 3.9 lt. Ø Inlet / Outlet: ...
-
Manufactured by SunEarth Inc.based in USA
A solar thermal system warms water by using a heat exchanger. This heat exchanger is powered by the energy collected from solar panels. A double wall heat exchanger is similar to a single wall heat exchanger, however, it has a double barrier that protects the portable water from the solar fluid. The double layer works as extra protection for your hot water reserves. ...
-
Manufactured by Sunrise CSPbased in INDIA
Sunrise CSP also offers Scheffler Dishes for smaller process heat plants and as a low-cost entry point to solar thermal solutions. With a 16 m2 mirrored surface, Scheffler Dishes are a modular and scalable system that grows in 5kW-thermal units and is ideal for applications that need as little as 5kW-thermal up to 300kW-thermal. The lightweight of Scheffler Dishes means they can be ...
-
Manufactured by Solimpeksbased in TURKEY
Solimpeks Wunder CLS Meander at a glance. Almeco – Tinox highly selective aluminum. Rock wool insulation. Copper pipe. Ultrasonic welding. Low iron tempered glass. Meander System. 10 years warranty. ...
-
Manufactured by Jiangsu Sunpower Solar Technology Co,.Ltd.based in CHINA
Material Copper and aluminum complex solar collector Copper and aluminum complex solar collector . Outer treatment Blue titanium sputtering Black chrome . ConStructure Pipe-sheet Pipe-sheet . Flat plate weight 5.7± 0.1KG 5.3± 0.1KG . Absorption rate 0.95-0.97 0.93-0.95 . Emission rate 0.03-0.05 0.05-0.07 . Frame size 2000 x 1000 x 76MM 2000 x 1000 x 76MM . Frame material thickness ...
-
Manufactured by SF Trading Ltdbased in BULGARIA
Solar collectors PNP-10 solar collectors are designed for domestic water heating. They can be installed in both "open" and "closed" systems (operating at atmospheric or higher pressure, respectively). They do not require special care and maintenance, and their installation is easy and fast. Our collectors are of the "Modified U-pipe" type and are made of the following ...
-
Manufactured by Sunerg Solar Energy S.R.L.based in ITALY
Evacuated tube collector with U-pipe technology. It is composed by 12 glass tubes, which have inside a U shaped copper tube on an aluminum fin in order to convert solar energy in thermal energy. The absorber surface area is bigger than the gross surface area because of a CPC reflector (Compound Parabolic Concentrator), which optimizes the direct and diffuse radiation from morning to evening. This ...
-
Manufactured by Invent Srlbased in ITALY
The “solar thermal” combines two environmentally friendly technologies: the heat pump and the solar thermal collector. Thanks to the physical pattern identical to the one of a normal solar thermal system and to heat pump components, solar thermodynamic represents the new technology frontier for heating water (up to 60 ° C), saving up to 85% from traditional systems, in an ...
-
Manufactured by F.D.E. Solar Srlbased in ITALY
Vertical thermal solar collector 2.1 m2. The thermic solar collector FDE 2.1/FDE2.6AV/FDE2.1MV/FDE2.6MV with selective flatbed has a high absorbing surface area , a high efficiency and a modern design . Suitable for all applications in the field of solar thermal systems, it is adaptable to different surfaces, either flat or pitched roof , while also allowing the installation on the facade ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you