Solar Water Heater Tank (Solar Water Heating) Equipment
-
Manufactured by Cosmosolar Ltdbased in GREECE
Material: low carbon steel, 3mm thick, protected with double enameling according DIN 4753, baked at 860 C. Heat exchanger: mantel type, from the above material and thickness of ...
-
Manufactured by Jiaxing Diyi Solar Technology Co.,Ltdbased in CHINA
Non-pressurized and direct heal energy exchange make It less thermal ...
-
Manufactured by Sidite Energy Co., Ltd.based in CHINA
It is a non-pressurized solar water heater. From the outside, it has a assistant tank. With high quality assistant tank and automatic water ...
-
based in CHINA
solar water heater is widely used for house and project as well. Right now, we have 10000 units capacity per month and can produce from 100-300L. The tank is using high quality enamel one which can work longer time. The flat collector absorber is using imported Germany blue one. Right now, our flat solar ...
-
Manufactured by Haining Yinuo Electric Co., Ltdbased in CHINA
Compact Pressure Solar Water Heater working principle: The solar heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure. ...
-
Manufactured by Haining Yinuo Electric Co., Ltdbased in CHINA
Stainless Steel SUS304 Compact Pressure Heat Pipe Solar Water Heater working principle: The solar heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water, when use, the hot water comes out because ...
-
Distributed by Phoenix Energybased in LEBANON
- All-in-one fully integrated solar water heater design: collector & tank - Highly efficient parabolic mirrors & spectrally selective foil - Pressurizable tank - Less sensitive to water ...
-
Distributed by Lianyungang Sunrain Co.,Ltd.based in CHINA
Pre-heated Solar Water Heater Material of Pre-heated Solar Water Heater 1) Inner tank: stainless steel--0.60mm. 2) Vacuum tube: QB-AL-N/AL-58-2000 and 58-2300. 3) Outer tank: painted steel-0.4mm; stainless steel SUS304-0.4mm. 4) Frame: coated galvanized ...
-
Manufactured by Jiangsu Sunpower Solar Technology Co,.Ltd.based in CHINA
Inner tank: 0.5mm food grade stainless steel304. Outer tank: 0.4mm stainless steel. Insulation: 50-55mm polyurethane CFC-free. Supporting Frame: 1.2 stainless steel. Vacuum tube: ALN/ALN Absorber with heat pipe, , glass thickness 1.6mm. Reflector is available. Capacity: 150 200 250 300L or other. Copper coil and SS304 coil ...
-
Manufactured by Haining Xianke New Material Technology Co.,Ltdbased in CHINA
the pressure tank can keep the water hot during the night. the tank and work station can be put in the basement or house, and the solar collector is installed on the roof. It is perfect combination for the apartment or villa. as the tank is in the house, you can set the temperature, water level ...
-
Manufactured by Jiangsu Sunpower Solar Technology Co,.Ltd.based in CHINA
Water tanks are made by machine. Flower design pressed on aluminum alloy (or stainless steel) shell, beautiful and durable. Inner water tank is made of super SUS304 food grade stainless steel plates, welded by argon arc. Water is pure and drinkable. Warm keeper of water tanks ...
-
Manufactured by Jiangsu Micoe Solar Energy Co.,Ltdbased in CHINA
Inner tank: Stainless steel SUS304-0.5mm. Vacuum tube: 58/1800. Outer tank: Painted steel -0.4mm. Fame: Coated galvanized steel-1.5mm. The material of insulation- Polyurethane. Tank diameter: 375mm/475mm. Thickness of insulation: 50mm. Collector Angle: ...
-
Manufactured by Haining Ensun Solar Technology Co.,Ltd.based in CHINA
Inner tank: SUS304-2B food grade stainless steel,0.35mm. Outer tank: Stainless Steel 202 Or Stainless Steel 304-BA. Heat insulation layer: Imported PU(thickness: 50-55mm). Vacuum tube:58mm*1800,Three target,1.6mm. Frame(Stand):Stainless Steel 202,1.2mm. 20/25/38/45 degree optional. Working Temp.: minus 20 to 260 celsius degrees. Working ...
-
Manufactured by Sidite Energy Co., Ltd.based in CHINA
Pressurized Double Inner Tanks Solar Water Heater belong to pressurized solar water heater. This product has two tanks, one is non pressurized, the other is pressurized. Suitable water temperature, Big water flow, Rapid heat ...
-
Manufactured by Atlantis Solarbased in USA
Inner tank: Stainless steel 5US304 2B Thickness: 0.5 Cr:17.0019.00 % Ni: 8.0010.00%. Insulating layer: Foaming polyurethane Thickness 55. Thermal transfer rate 0.022W/m.k Can collect solar energy efficiently by Atlantis Solar® inclination angle design. " Low price reliable solution, Simple structure, Easy installation. Hot ...
-
Manufactured by Sole S.A.based in GREECE
Eurostar: an innovation among solar water heaters, created with high tech engineering and respect for the environment. The concept of Eurostar’s design has always been to create an environmentally safe, super-efficient and reliable solar water heater that is durable and easy to ...
-
Manufactured by Haining Jianeng Solar Energy Industry Co.,Ltdbased in CHINA
Competitive price and good quality. CE,ISO9001. 5-15 years warranty. 24hours ...
-
Manufactured by EASTRONG Technologybased in CHINA
Modular system is easy for transport and installation. Tank in 150/300 liter version with optimized heat insulation. Woven toughened solar safety glass. Qualified and recyclable materials ensure a long service life and high environmental compatibility. Maximum heat transfer between the absorber sheet and the header tubes thanks to ...
-
Manufactured by Jiaxing Passion New Energy Technology Co., Ltdbased in CHINA
Material of out tank: 0.4mm thickness color steel/ fluorine carbon steel. Material of inner tank: Food grade 1.2mm thickness ,SUS304-2B stainless steel. Tank insulating layer: 55mm 45kg/m³ high-density polyurethane foamed. Inlet and outlet hole: Male G 1/2, 3/4. Max pressure: 0.6Mpa. Solar collector tube: 3.3 Borosilicate ...
-
Manufactured by Haining Jixiang Solar Energy Co., Ltd.based in CHINA
Evacuated Tube Collectors can be used in both closed or open-loop configuration, although we advise the use of a closed loop system wherever possible as this will prevent corrosion or scale build up in the collector manifold. Using a closed system will therefore extend the life of the collector considerably. We offer to our OEM customers evacuated Tube Collectors. Let our engineering assist you ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you