Solar Water Equipment For Solar Energy In Africa
-
Manufactured by Manyur Technologies Ltd.based in KENYA
Flat plate pressurized solar water heater is such a kind of thermosiphon solar water heating device with flat plate collector placed below high pressure hot water tank. The tank and flat plate are connected with circulation pipes to form an closed-loop solar water heating system, the household water is heated directly inside flat panel collector and rise to be stored inside hot water tank. Flat ...
-
Manufactured by Manyur Technologies Ltd.based in KENYA
The split solar water heating is an active system, using a circulation pump with a controller to circulate the fluid in the closed loop system. Storage tank and solar collector are separated, the collector is integrated with the building perfectly, while the tank and the pump station can be installed anywhere in the ...
-
Distributed by SINET Solutionsbased in ZIMBABWE
Models Non pressurized models Natural circulation of water between solar tube and the water tank. Suitable for very high temperatures. Pressurized models No water going through the vacuum tubes. Water in the tank gets heated by the copper pipes in the tubes Seperated tank models Collectors are separated from the storage tank . The tank can be put anywhere inside the house. ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
Extech’s SP505 measures solar power level from outdoor sunlight to determine the best location of solar panel and solar water heater installations. It is also used indoors by window manufacturers, automotive industry, and remodeling home owners to check the level of solar radiation transmission through various glass thicknesses and degrees of tinting to use for window installations. ...
-
Manufactured by IRSCbased in EGYPT
IRSC Solar thermal systems reduce water-heating costs for households and businesses by as much as eighty percent. Another bonus is that IRSC solar thermal users are protected from energy price hikes because the sun is readily available. IRSC estimates that solar thermal systems will last the entire lifetime of your ...
-
by Pamtronicsbased in NIGERIA
Outer tank: Color Coated Steel, thickness 0.4MM; Dia, 470MM. Inner tank: SUS304/2B, thickness 0.5MM; Dia, 360MM. Warm keeping layer: polyurethane foaming 50MM. Bracket, Galvanized Steel, thickness 1.5MM. Vacuum tube: 58-1800 or 45-1500, Two layer. Angel of Bracket: 5°,22°, ...
-
Manufactured by Manyur Technologies Ltd.based in KENYA
Vacuum tubes are the absorber part of solar water heater, consisting of double-layer coaxial glass tubes, made from extremely strong borosilicate glass 3.3, the inner tube coated by absorber selective coating, which absorbs solar energy and converts it into thermal energy for water heating. This type of tube is chosen as its reliability, efficient performance and low cost. More and more people ...
-
based in EGYPT
Solar heater is simple design with high efficiency, this design is characterized by combining the heating system and use within a height adjustable modular assembly unit to ensure maximum benefit from the solar beam and be from 60cm to 170cm maximum, and higher performance power than traditional Thermo siphon systems of the same capacity due to the use of the tank as a complex The sun and the ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
Spire Metering’s T-MAG electromagnetic BTU meter is designed to accurately measure the heat or cold energy of a water heating/cooling circuit. It is consisted of three parts, an electromagnetic flow sensor, a pair of temperature sensors and a main unit. The main unit is a powerful console which combines high accuracy flow measurement, temperature measurement and BTU ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you