New Oil Treatment Unit CMM-2,2H Video
Oil treatment unit CMM-2,2H. There are many companies specialized in power transformer maintenance. Sooner or later, all of them run into the problem of aging and degrading transformer oil. - We have many types of equipment for all tasks: be it oil regeneration, degassing, heating or purification of oil, sorbent reactivation, transformer evacuation and drying etc. This is the new CMM-2.2N model, designed for purification of oil by heat and vacuum, degassing and removal of particulate matter. This unit can also heat electrical equipment with hot transformer oil, evacuate and dry transformers. The unit is sufficiently compact for air freight. The CMM-2.2N is built with Calpeda pumps instead of gear pumps, which reduces noise. This unit does not have an input pump, and the oil is sucked into the unit by vacuum. The CMM-2N comes in to variants: one with and one without oil hose storage compartment. The unit is equipped with a controller for proportional control of the heater, it has a redesigned housing and improved paint coat. By reducing the number of component parts we were able to improve reliability of the unit while reducing its cost at the same time. Hence there is not a low noise, compact unit in the market, with processing rate of two cubic meters per hour. If you specialize in transformer maintenance and servicing and this oil processing rate is sufficient for your applications, the CMM-2.2N is definitely worth your attention.
Customer comments
No comments were found for New Oil Treatment Unit CMM-2,2H Video. Be the first to comment!