Plasma Heating (Plasma Technologies) Equipment
-
Manufactured by Phoenix Solutions Co. (PSC)based in USA
PSC works with every client to custom-design a Torch Manipulation System that meets the specific requirements for each environment and application. The controls for the manipulator are integrated into the HMI, giving operating technicians a single point of control over the entire ...
-
Manufactured by Phoenix Solutions Co. (PSC)based in USA
The Process Furnace is the vessel in which the plasma torch operates. Our expansive knowledge of plasma heating, combined with the legacy of FluiDyne Engineeing Corp as an industry leader in furnace design, makes us uniquely qualified to design and fabricate custom ...
-
Manufactured by C-Tech Innovationbased in UNITED KINGDOM
C-Tech Innovation’s microwave plasma system is unique. Designed to operate reliably under a various conditions including atmospheric, reduced or elevated pressures. The technology uses commercial microwave generators at a frequency of 2.45 GHz for smaller systems, and frequencies of 896 or 915 MHz for larger ...
-
Distributed by S3 Instrumentsbased in CANADA
Features: Reduces oxides in the solder by irradiating hydrogen radicals having strong reducing power generated in H2 plasma when heating and melting solder bumps in order to enable formation of pure ...
-
Manufactured by XP Power S.A.based in BELGIUM
The CB series is the culmination of 45 years of RF plasma and heating experience. We have taken the proven rugged design of the CX series power amplifier section and combined it with all the innovation in DC supplies and diagnostics to make a compact, stable RF power supply without compromising reliability for size. These single frequency RF ...
-
Manufactured by Sidrabe Vacuum, Ltd.based in LATVIA
Technologies: Transparent conductive coatings: ITO, ZnO, AZO, SnO2 etc. Metal and alloy coatings: Cu, Ag, In, Ti, Ni, Mo, Cr, NiCr, St.St , NiCo etc. Oxides and nitrides: SiO2, TiO2, TiN, Si3N4 etc. p-i-n structures. Preliminary drying using different heating techniques. Plasma pre-treatment by ion and magnetron sources. Vacuum lamination of ...
-
Manufactured by JEMAbased in BELGIUM
Plasma can be generated in several ways for various processes and applications. Our tailor-made solutions intervene in the powering of plasma torch. High heat process: A thermal plasma torch is generally powered by a DC power supply from few tens of kW up to several MW. A gas is pushed through the torch and transits inside ...
-
Manufactured by Deposition Technology Ltd.based in UNITED KINGDOM
The EVOS PVD system utilises the latest technology to deliver the best performance, robust reliability and lowest cost of ownership in its class, all packaged into a very small footprint. The EVOS is easily configurable and changeable between 100mm, 125mm,150mm and 200mm wafer ...
-
Manufactured by ScanArc Plasma Technologies ABbased in SWEDEN
A plasma generator is a device for transforming electric energy into heat energy carried by a gas. ScanArc Plasma Technologies AB manufactures non-transferred, segmented type plasma generators in which a gas is heated by an electric arc to high ...
-
Manufactured by Magellan Aerospacebased in CANADA
Magellan Aerospace specializes in the manufacture and supply of aeroengine shafts and helicopter drive shafts, as well as other flight safety critical machined components, including discs, seals, and spacers. In this niche, yet highly competitive market, we utilize many unique processes to manufacture shafts for both the hot and cold sections of a gas turbine engine. Shafts up to 120 inches long ...
-
Manufactured by Teralba Industries Pty Ltdbased in AUSTRALIA
The Dimpleflo Double Pipe Heat Exchanger (also known as “Tube-in-Tube”) is the simplest and most robust configuration of hygienic heat exchanger. Dimpleflo tube in tube heat exchangers are utilised for fluids containing stringy fibres, chunks or other particles and low-high viscosity ...
-
Manufactured by Thermachbased in USA
Conventional plasma spray, commonly referred to as atmospheric plasma spray (APS), is the most versatile method for applying thermal spray coatings. With the ability to control the many facets of the plasma spray process, you can not only spray a wide range of materials, from metallics to ceramics, but also onto virtually any ...
-
Manufactured by Renuvion, Trademark of Apyx Medical Corporationbased in USA
The Renuvion system is intended to be used with compatible electrosurgical generators for the delivery of radiofrequency energy and/or helium plasma to cut, coagulate and ablate soft tissue during open surgical procedures. The Apyx Plasma/RF Handpiece (APR HP) is a sterile, single use electrosurgical (monopolar) device intended to be ...
-
Manufactured by Tetronics Technologies Limitedbased in UNITED KINGDOM
Our technology is driven by our expertise. In today’s competitive marketplace, success at Tetronics is increasingly driven by our expertise in technology. We build on 50 years of experience to deliver our best-in-class clean plasma technology to meet the often complex needs of our customers across a number of material recovery and ...
-
Manufactured by MGM spol. s.r.o.based in CZECH REPUBLIC
In practice for electrically conductive materials. Principle – creation of the cutting kerf by fusing of the cutted material and its blowing by flow of the high pressure gases. The source of the heat is the plasma torch, whose function is to create plasma beam with the temperature up to 30.000°c. Plasma beam is created ...
-
Manufactured by MGM spol. s.r.o.based in CZECH REPUBLIC
In practice for electrically conductive materials. Principle – creation of the cutting kerf by fusing of the cutted material and its blowing by flow of the high pressure gases. The source of the heat is the plasma torch, whose function is to create plasma beam with the temperature up to 30.000°c. Plasma beam is created ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you