Waste-To-Energy Equipment In Australasia
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to produce energy from burning waste. This renewable energy solution is extremely popular and is constantly being enhanced. It can reduce the volume of waste to just 10% in bottom ash for most ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
Based on the DTI Series, but with an adapted design for direct energy recovery (product vs product) for sludge with low viscosity. The inner tube is removable making it possible to inspect/clean both tube and shell side. It also allows for easier and faster cleaning consequently reducing operational downtime required for these high fouling products. The tube in tube concentric geometry makes it ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to get the optimal energy back from the destruction of waste. Inciner8 are continuing to evolve their waste processing technologies. It is clear that these have the potential to contribute to UK & Global ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Incineration is a waste treatment process that involves the combustion of organic substances contained in waste materials. Incineration and other high-temperature waste treatment systems are described as “thermal treatment”. incineration of waste materials converts the waste into ash, flue gas and heat. The ash is mostly formed by the inorganic constituents of the waste and may take ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 now offer a full range of containerised incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerisation enables immediate waste management as the units are fully assembled and pre-installed. ...
-
Manufactured by Eneraque Pty Ltdbased in AUSTRALIA
When waste is stored in landfill sites, micro-organisms break down the waste material causing gas to be released. This gas can be extracted from disposal site and made available for use as fuel. Eneraque manufactures, installs and maintains landfill gas flares purpose built for your waste ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving mixing, and ultimately combustion efficiency. These ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Steam assisted flares are flares designed to dispose of heavier hydrocarbon gases which have a tendency to smoke. In order to prevent smoke formation, steam is injected into the waste stream using peripheral steam rings, center stream spargers and/or inner induction tubes. Steam flares are used in applications where high pressure steam is available on site. Steam flares are typically found in ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for vehicles with the cake produced, used ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...
-
Manufactured by Teralba Industries Pty Ltdbased in AUSTRALIA
The Dimpleflo Double Pipe Heat Exchanger (also known as “Tube-in-Tube”) is the simplest and most robust configuration of hygienic heat exchanger. Dimpleflo tube in tube heat exchangers are utilised for fluids containing stringy fibres, chunks or other particles and low-high viscosity ...
-
Manufactured by Zeeco, Inc.based in USA
The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. Our UF flare series is one of the most in-demand flares of its kind for punishing conditions that include extreme ...
-
Manufactured by Simons Boilers Cobased in AUSTRALIA
All Simons steam boilers are designed to Australian Standard No. A.S. 1228. Simons VS 610 electric steam boilers are manufactured and fully tested in our factory in Sydney. Our packaged automatic electric steam boilers are, and always will be normally available ex-stock. A policy of the Simons group of companies for over 70 ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Certified Ultra-Low Emissions Burner (CEB) is an ultra-low emissions vapor device that utilizes premix surface combustion to effectively combust waste gases in a compact footprint. With VOC destruction efficiencies of up to 99.99% and a NOx emissions guarantee of ≤ 15 ppmv at 3% oxygen, carbon monoxide emissions guarantee of, smokeless operation and no luminous flame, the CEB is the best ...
-
Manufactured by Cs Clean Systems AGbased in GERMANY
FABLINE is the standard CLEANSORB model for waste gas removal on factory-scale applications. Available in three column sizes, the system is readily adaptable to the requirements of both pilot line and full-scale manufacturing. Enabled by the built-in safety and efficiency of CS CLEAN SOLUTIONS proprietary CLEANSORB® media, and with several thousand installations worldwide, FABLINE is the ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 100 Continuum Ignitor utilizes a high voltage electric arc to ignite a combustible air/gas mixture. This arc typically occurs every 20 seconds for a two second duration (timing is adjustable). The Continuum provides a spark inside a ‘slipstream’ chamber that diverts a portion of the waste gas to create a combustible air/gas mixture. This allows the Continuum ignitor to ...
-
Manufactured by Entech - Renewable Energy Solutions Pty Ltd.based in AUSTRALIA
WtOil is an optional stage of the Entech-Tru-RES for plastics. Whereas the WtGas system is based upon immediate firing of the gas produced, this alternative is for the plastic portion of the waste to be converted into fuel oil for storage and use elsewhere (as a replacement to fossil fuel oil). It's based upon a pyrolysis process that converts the plastics from its solid to condensable vapour ...
-
Manufactured by Delorean’s Engineering Division (formerly Biogass Renewables)based in AUSTRALIA
Biogass Renewables uses a process called anaerobic digestion to convert commercial and industrial waste into onsite electricity, heat and clean methane gas. The organic waste streams that feed our plants range from supermarket, kitchen, dairy, vegetable, abattoir and fishery waste, to grain and legume surplus, to ordinary garden waste. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare Industries’ industry-proven Flame Ring Flare Technology is recommended in low-BTU ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
FlareWell® waste gas burners form part the anaerobic digestion process. FlareWell is designed to burn gas from the digestion process in excess of the gas necessary for the sludge heating system. The burner is automatic in operation and uses digester gas and/or LPG for pilot ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you