Waste-To-Energy Equipment In Netherlands
-
PremiumManufactured by Gazpack B.V.based in NETHERLANDS
The Sulaway® unit is the heart of the Gazpack installation and fully customer specific. Our Suluway® is built to convert large capacities of biogas to biomethane (>1500 Nm³/h). Therefore, a wide range of capacities can be achieved. Thus, we can offer solutions for large-scale upgrading and the system can handle high H2S ...
-
Manufactured by Electronbased in NETHERLANDS
Of all available nitriding processes, plasma nitriding provides the most consistent results and the highest level of reliability. Why? Because plasma nitriding systems use precisely controlled technology that ensures dependable quality. Organizations looking for plasma nitriding systems have various options. At Electron, we offer IonHeat GlowTech, NitrEos, and GlowFit systems. Each ...
-
Manufactured by Smitsvonk Holland B.V. - a member of the Durag Groupbased in NETHERLANDS
Ignition of waste gas from pipe flares, air and steam assisted flares and ground flares For most flare systems the pilot burner can not be accessed for service. Maintenance or replacement is not possible while the flare is in operation.To safeguard operation, Smitsvonk's pilots provide reliable ignition and stable burning even under the most difficult climate ...
-
Manufactured by CECO Environmentalbased in USA
To achieve higher efficiency levels, gas turbine waste heat is used to generate process steam or steam turbine operation. Our Peerless-Aarding brand Gas Turbine Bypass Exhaust Duct allows flexible operation of the power island as well as the capability of starting the gas turbine in rapid starting mode and allowing the heat recovery steam generator (HRSG) to gradually come online. ...
-
Manufactured by Cs Clean Systems AGbased in GERMANY
FABLINE is the standard CLEANSORB model for waste gas removal on factory-scale applications. Available in three column sizes, the system is readily adaptable to the requirements of both pilot line and full-scale manufacturing. Enabled by the built-in safety and efficiency of CS CLEAN SOLUTIONS proprietary CLEANSORB® media, and with several thousand installations worldwide, FABLINE is the ...
-
based in NETHERLANDS
Microplasma Spraying allows many materials to be applied to almost every surface. This system, MPSS, sprays with a small spot (1-2 mm2). ECN has develloped a Micro Plasma Spraying System (MPSS) for the: Spraying on plastics: Aluminium bands sprayed on glas fibre reinforced plastic. Thickness up to 0.5 ...
-
based in NETHERLANDS
The High Temperature Winkler (HTW) technology is the most highly developed gasification technology utilizing bio-based feedstocks. The process was originally developed in the 1920s by the German energy company Rheinbraun AG utilizing lignite coal. Over the years, the technology has been significantly improved to achieve better results and has been re-engineered to handle a broad range of ...
-
Manufactured by Solex Thermal Sciencebased in CANADA
Unlike conventional drying and conditioning technologies which blow hot air through the product as both the heat source and the way of removing moisture; Solex uses a combination of advanced plate heat exchange technology to provide the heat source and independent sweep air to remove the moisture. This approach greatly reduces air-flow requirements, returning much better efficiencies and improved ...
-
by SparkNanobased in NETHERLANDS
Technical features: Substrate types flat substrates like polymer and metal foils, wafers, glass and porous substrates. Substrate size: A free envelope of 320 mm x 360 mm x 5 mm is available. In this volume any flat substrate can be placed with a substrate specific holder. Process: Both thermal and plasma enhanced ...
-
based in NETHERLANDS
Development and building of high voltage generators based on client specification. In the food- and pharmaceutical industry it is crucial to make bacterium free products. For the most part, water is used as a binder in the production process of tablets, pills and dragées. Therefore, first, the water is made free of bacteria by heating and, if necessary, is further purified with UV-filter ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
Electrical power generation by an Organic Rankine Cycle (ORC). An ORC converts recovered waste heat to combined heat and power (CHP), where steam based energy recovery is not practically feasible, specifically for energy recovery at lower flue gas temperatures and smaller thermal input capacities. Power generation by a steam turbine, specifically for energy recovery at higher flue gas ...
-
Manufactured by ELIQUO Water & Energy B.V.based in NETHERLANDS
LYSOTHERM® is a unique THP technology that uses tubular heat exchangers and thermal oil, instead of steam or chemicals for the hydrolysis process. ELIQUO designs and manufactures LYSOTHERM® in Germany. ...
-
Manufactured by HoStbased in NETHERLANDS
HoSt acts as a turnkey supplier of (air blown) fluidized bed gasifier plants. By means of gasification biomass fuels can be converted to a combustible syngas, which can be cleaned and used in several kinds of power generation equipment. Gasification is a feasible technology for thermal conversion of waste, meeting the strict emission ...
-
by SparkNanobased in NETHERLANDS
Vellum is tailored designed for sheet to sheet (S2S) applications for deposition on substrates ranging from 0,5 x 0,5m up to 1 x 1.5 m. Substrates like metal or polymer foils, wafers, glass and porous substrates. All aimed at real production throughput up to 20 substrates per minute. In combination with a large variety of deposition materials and deposition temperatures. The substrate flow ...
-
Manufactured by HeatMatrix Group B.V.based in NETHERLANDS
Heat recovery from flue gas or exhaust air. Heat up boiler feed water, make-up water or process water. Corrosion and fouling resistant. ...
-
Manufactured by Tempress Systemsbased in NETHERLANDS
Tempress SPECTRUM is a batch-type PECVD system for SiOx and SiNx deposition on silicon solar cells. It uses the benefits of a direct plasma system (i.e. excellent emitter passivation, dense and closed layer deposition, low tool maintenance) while maintaining good color ...
-
Manufactured by CECO Environmentalbased in USA
Diverter dampers are isolation devices that are commonly used in heat recovery steam generator (HRSG) exhaust stack applications. The Peerless-Aarding brand Gas Plant Diverter Damper can be configured in a low-leak or zero-leak design, and a toggle-type or pivot style diverter damper for HRSG, waste heat recovery, natural gas turbine, and other systems that require diversion of the gas stream. ...
-
Manufactured by CECO Environmentalbased in USA
Diverter dampers are isolation devices that are commonly used in heat recovery steam generator (HRSG) exhaust stack applications. The Peerless-Aarding brand Gas Plant Diverter Damper can be configured in a low-leak or zero-leak design, and a toggle-type or pivot style diverter damper for HRSG, waste heat recovery, natural gas turbine, and other systems that require diversion of the gas stream. We ...
-
Manufactured by Meyer Burgerbased in SWITZERLAND
Roth & Rau B.V. is offering thermal plasma-based PECVD equipment for the deposition of thin and thick films for various applications like photovoltaics, display and batteries. The DEPx is a further evolution of the DEPx 2000 series, which has a proven track record in high efficiency solar cell production. The DEPx provides fast and low cost deposition of various films dedicated for different ...
-
Manufactured by IHI Hauzer Techno Coating B.V.based in NETHERLANDS
The Hauzer Flexicoat 500 is the smallest Flexicoat system, offering the benefits of proven Hauzer technology at a smaller scale and lower investment. The Flexicoat 500 was designed with the needs of small coating service providers, universities, R&D institutes, and start-ups in mind. It is also a cost effective coating system for larger coating service providers who regularly need to coat ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you