Waste-To-Energy Equipment In Florida
-
Manufactured by Renuvion, Trademark of Apyx Medical Corporationbased in USA
The Renuvion system is intended to be used with compatible electrosurgical generators for the delivery of radiofrequency energy and/or helium plasma to cut, coagulate and ablate soft tissue during open surgical procedures. The Apyx Plasma/RF Handpiece (APR HP) is a sterile, single use electrosurgical (monopolar) device intended to be used in conjunction with compatible generators for the ...
-
Manufactured by Questor Technology Inc.based in CANADA
ClearPower Systems by Questor specializes in the design and installation of Organic Rankine Cycle (ORC) power generators. Electrical power is generated from waste heat. Our systems are designed to efficiently transform otherwise wasted high and low-temperature heat into valuable electricity power which can be used on site, or transferred to a power grid. The result is an overall system ...
-
Manufactured by Frontline Wastebased in USA
A mobile Organic Rankine Cycle (ORC) power generator by a 3rd party, leader in small-scale heat-to-power generation, specially adapted to work in conjunction with the Gen-H. The Gen-E converts the heat from the waste recovery process into zero-carbon electricity. One Gen-H powers two ...
-
Manufactured by Sedation Systems LLCbased in USA
Using a nitrous scavenger to minimize exhaled nitrous is highly recommended by the CDC, NIOSH, and OSHA. It immensely increases the safety of performing procedures in an office setting while administering nitrous, and Sedation Systems LLC is proud to offer the only FDA-cleared scavenging unit available. ...
-
Manufactured by Apyx Medical Corporationbased in USA
J-Plasma® is an advanced energy modality which combines the unique properties of helium plasma with a proprietary RF waveform. Helium plasma focuses RF energy for greater control of tissue effect, enabling a high level of precision and virtually eliminating unintended tissue trauma. These properties may allow surgeons to use the energy on and around sensitive structures. In the plastic ...
-
Distributed by MRU Instruments - MRU Gas Analyzerbased in USA
The SWG-100 is a stationary unit used in the analysis of biogas, biomethane, solid waste gas and coal bed methane. The gas conditioning package includes several additional components to separate liquid from the sample gas and prevent condensation, leading to a longer sensor life and fewer maintenance concerns. These instruments can withstand the harsh environments of humid, precipitation heavy ...
-
Distributed by MRU Instruments - MRU Gas Analyzerbased in USA
The SWG-100 is a stationary unit used in the analysis of biogas, biomethane, solid waste gas and coal bed methane. -Industry compatible rugged design for harsh industrial environment -Standard safety system included with continuously monitored fan ventilation of cabinet and gas flow restrictor orifice at gas inlet -Efficient sample gas preparation for fast and reliable measurements -Sampling ...
-
Manufactured by Green Gas Germany GmbHbased in NETHERLANDS
We generate more energy from your landfill gas. If you are responsible for one or more landfills, environmental policies, sustainable prospects and the successful operation of the business are important parameters for all involved. In many closed and active landfills, additional yields can be realized by improving energy production from the environmentally harmful methane gas that develops during ...
-
Manufactured by Apyx Medical Corporationbased in USA
The J-Plasma® generator and handpieces are configured for quick and easy setup: Plug and play – setup in under 10 seconds. Extendable/retractable blade for enhanced versatility. Use of J-Plasma does not require any special certifications. Includes 4-year warranty with no service contracts ...
-
Manufactured by VERTISA Medical Waste Technologybased in USA
VERTISA ELECTRIC steam boilers are designed to provide fast, efficient, and economical steam for heating and process using special design corrosion resistant electrical heating elements. The boiler controls automatically energize/de-energize steps of elements to maintain the desired steam pressure. All boilers comply to Pressure Equipment Directive (PED) 2014/68/EU and all electrical components ...
-
Manufactured by B-2B Global Solutionsbased in USA
1,000 lbs. of 300°F steam per 100 lbs. of waste processed. All electric process. 90%+Volume and Weight reduction. Non-leaching residual may be land-filled as general waste or sewer discharged. Clean air and water vapor emissions. Less than 500 CFM total air discharge. Low processing costs - 3 to 11 cents per pound with heat recovery. Can process all waste streams without segregation. 2 year ...
-
Manufactured by BD Environmental Solutionsbased in USA
Utility Flares; Pipe Flares are unassisted equipment designed to combust hydrocarbons where non-smokeless operation is environmentally acceptable or where the waste gases produce little or no smoke due to their ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving mixing, and ultimately combustion efficiency. These ...
-
Manufactured by CMI Groupebased in BELGIUM
CMI designs, manufactures and maintains industrial steam production boilers marketed under the brand names Denapak and ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Steam assisted flares are flares designed to dispose of heavier hydrocarbon gases which have a tendency to smoke. In order to prevent smoke formation, steam is injected into the waste stream using peripheral steam rings, center stream spargers and/or inner induction tubes. Steam flares are used in applications where high pressure steam is available on site. Steam flares are typically found in ...
-
Manufactured by Yamato Scientific America Inc.based in USA
Standard barrel type low temperature ashing devices suitable for a wide range of application such as ashing , etching and dry ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for vehicles with the cake produced, used ...
-
Manufactured by Yamato Scientific America Inc.based in USA
Compact, barrel type low temperature ashing device designed with a large chamber made of quartz considered almost completely resistant against most plasma ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Certified Ultra-Low Emissions Burner (CEB) is an ultra-low emissions vapor device that utilizes premix surface combustion to effectively combust waste gases in a compact footprint. With VOC destruction efficiencies of up to 99.99% and a NOx emissions guarantee of ≤ 15 ppmv at 3% oxygen, carbon monoxide emissions guarantee of, smokeless operation and no luminous flame, the CEB is the best ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 100 Continuum Ignitor utilizes a high voltage electric arc to ignite a combustible air/gas mixture. This arc typically occurs every 20 seconds for a two second duration (timing is adjustable). The Continuum provides a spark inside a ‘slipstream’ chamber that diverts a portion of the waste gas to create a combustible air/gas mixture. This allows the Continuum ignitor to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you