Waste-To-Energy Equipment In Texas
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
An incinerator or thermal oxidizer provides the ultimate in destruction efficiency. An incinerator is a fired appliance used to oxidize potentially dangerous hydrocarbons (including BTEX’s) and sulfur compounds from oil and gas production processes. Designed with precise calculations, incinerators achieve in excess of 99.9% Destruction Removal Efficiency (DRE). An incinerator uses an active ...
-
Manufactured by Zeeco, Inc.based in USA
The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. Our UF flare series is one of the most in-demand flares of its kind for punishing conditions that include extreme ...
-
Manufactured by Encore Combustionbased in USA
Suitable for use in all bio-gas applications – landfill, wastewater treatment, food processing, breweries, etc.. Provides ground based, completely hidden combustion process. Provides smokeless combustion. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater combustion efficiency. Temperature controlled to ensure the highest ...
-
Manufactured by MRW Technologies, Inc.based in USA
Staged ground flares are utilized for smokeless combustion of large volumes of waste gas flow with high turndown. They are commonly used in LNG and gas processing facilities. Due to the nature of these applications, staged ground flares are designed to handle streams over a wide pressure range and variety of ...
-
Manufactured by Encore Combustionbased in USA
Provides ground based, completely hidden combustion process. Provides smokeless combustion of heavy waste gas vapors. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater combustion ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec Biogas 244E Enclosed Burner Systems are designed to burn biogas efficiently and safely over a wide range of operating parameters. With no visible flame, the 244E systems use an innovative stack design to naturally induce the proper amount of combustion air which guarantees high destruction removal ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Certified Ultra-Low Emissions Burner (CEB) is an ultra-low emissions vapor device that utilizes premix surface combustion to effectively combust waste gases in a compact footprint. With VOC destruction efficiencies of up to 99.99% and a NOx emissions guarantee of ≤ 15 ppmv at 3% oxygen, carbon monoxide emissions guarantee of, smokeless operation and no luminous flame, the CEB is the best ...
-
Manufactured by Vaprox LLCbased in USA
Vaprox offers a full line of tank battery Gas Flare – Single Pressure Systems that allows our client to achieve 98% or greater VOC destruction efficiency for either low pressure tank vapor gas or high pressure emergency vent gas while complying with all state and federal air quality regulations. All Vaprox flare systems are available in 12vdc and 120vac and come standard with an ...
-
Manufactured by CECO Environmentalbased in USA
To achieve higher efficiency levels, gas turbine waste heat is used to generate process steam or steam turbine operation. Our Peerless-Aarding brand Gas Turbine Bypass Exhaust Duct allows flexible operation of the power island as well as the capability of starting the gas turbine in rapid starting mode and allowing the heat recovery steam generator (HRSG) to gradually come online. ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
A flare stack refers to an elevated vertical stack used for burning off unusable waste gas in a variety of oil and gas production applications. Waste gases are either uneconomical to recover/retain, or released during planned or unplanned over-pressuring of plant equipment. Waste gases are released to the flare via piping (flare header) and burned as they exit the flare ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving mixing, and ultimately combustion efficiency. These ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of pressure and BTU ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Steam assisted flares are flares designed to dispose of heavier hydrocarbon gases which have a tendency to smoke. In order to prevent smoke formation, steam is injected into the waste stream using peripheral steam rings, center stream spargers and/or inner induction tubes. Steam flares are used in applications where high pressure steam is available on site. Steam flares are typically found in ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301T Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper ...
-
Manufactured by MRW Technologies, Inc.based in USA
Gas-assisted flares mix fuel gas with the waste gas for applications requiring smokeless operation. Our flare tips can be engineered to mix this fuel gas with both high and low-pressure waste gas streams. MRW can supply these gas-assist flares at petroleum refineries, chemical & petrochemical facilities, oil & gas production facilities, or others as desired. Our designs are proven through ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
An FKO (fluid knockout) is a low-pressure separator used on a vent line to remove liquids from a waste gas stream prior to being flared or incinerated. This can prevent water from freezing in the flare stack riser or liquid carryover from being sprayed over immediate area (burning rain). Alberta – All combustion systems in Alberta require a fluid knockout as per AEUB Directive ...
-
Manufactured by MRU Messgerate fur Rauchgase und Umweltschutz GmbHbased in GERMANY
Stationary Analyzer for Syngas - ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential areas. ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for vehicles with the cake produced, used ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
Simply put – a pilot is continuous, it’s always on. The pilot flame serves to light the waste gas stream exiting the flare, or inside an incinerator, or any other combustion unit. You need to have an available fuel gas supply in order to install a continuous pilot. An ignitor (or ignition system) is an intermittent spark or flame front that is responsible for keeping the pilot lit. On ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you