Waste-To-Energy Equipment In USA
-
Manufactured by Hero Flare LLCbased in USA
The HERO Low Flow Flare is specifically designed for low flow flare applications, or for those sites located in remote locations and do not have access to electric or pilot fuel gas. The most common application is flaring off low pressure tank vapors and remote ...
-
Manufactured by Clean Energy Heating Systemsbased in USA
Our self-contained air compressor kit will work with any of our waste oil furnaces or boilers. It’s an important part that helps your furnace work most efficiently and generate the maximum ...
-
Manufactured by Allied Environmental Technologies, Inc.based in USA
The need for the ultimate Waste Destruction offered by plasma discharge technology is evident from population growth in all nations, deterioration of water supplies, increased production of toxic wastes and infectious hospital wastes, and the diminishing amount of land that can be used for municipal solid waste dumps. Because of these increasing volumes of all types of wastes and the increased ...
-
Manufactured by KIONIX, Inc.based in USA
TRI-AXIS 16-BIT ACCELEROMETERS SUPPORTING RANGES FROM ±2G TO ±16G, DIGITAL (I²C/SPI) OUTPUT, ADVANCED DATA PATH, ADVANCED WAKE-UP/BACK-TO-SLEEP ENGINE, FIFO BUFFER, -40°C TO +105°C OPERATING TEMPERATURE RANGE IN A 2X2X0.9MM LGA 12-PIN - KX132-1211. The KX132-1211 is a tri-axis ±2g, ±4g, ±8g, ±16g silicon micromachined accelerometer featuring ...
-
Manufactured by Plastic2Oilbased in USA
No. 2 Fuel is a mid-range fuel commonly known as furnace oil or diesel. When No. 2 Fuel is used for industrial purposes as furnace oil, it does not require any additives. If the fuel is to be used as diesel, it must have a lubricity and anti-oxidant additive. 100% of the Plastic2Oil No. 2 Fuel is derived from waste plastic and does not require blending. ...
-
based in USA
Balboa Pacific has developed the Bal-Pac Thermal Conversion Pyrolytic Gasification System, a continuous feed waste treatment technology. The process is the destructive distillation of toxic or non-toxic organic material, either solid or liquid substances, reducing the feedstock to a sterile ash and hot exhaust gases. The Bal-Pac Systems are not incinerators. Rather than burning waste, the ...
-
Distributed by Amtech Systems, Inc.based in USA
Semiconductor & Solar Solutions Tempress Systems, Inc. develops and manufactures horizontal diffusion & LPCVD furnace systems and offers innovative and creative solutions combined with safety, quality and advanced technology to fit the requirements of your particular ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
A flare stack refers to an elevated vertical stack used for burning off unusable waste gas in a variety of oil and gas production applications. Waste gases are either uneconomical to recover/retain, or released during planned or unplanned over-pressuring of plant equipment. Waste gases are released to the flare via piping (flare header) and burned as they exit the flare ...
-
Manufactured by Ener-Core, Inc.based in USA
The Dresser-Rand Power Oxidizer 2 MW (KG2-3GEF/PO) Powerstation’s gas turbine with Ener-Core Power Oxidizer technology is the only clean power generation that runs directly on low pressure, low-quality gases that otherwise could not be used. The system integrates oxidation technology with the field proven 2MW-KG2-3G gas turbine, to efficiently generate electricity with near-zero emissions. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving mixing, and ultimately combustion efficiency. These ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of pressure and BTU ...
-
Manufactured by TSI Inc.based in USA
Torrefaction is a new twist on an old process that roasts wood chips (or other biomass) in a low oxygen environment. This boils off volatiles and low energy density elements such as hemicellulose to leave a visually darker wood chip that has a higher energy density than regular wood and a natural resistance to moisture. Applications for this product are still developing, but include High Energy ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat's Recovered Energy Generation (REG) solutions complement cement plant operations and generate cost-effective electricity from unused waste heat. Even in optimized cement plants, some heat is lost, either from exhaust gases, clinker coolers or both. Ormat's REG solutions capture the residual heat and use it to generate clean, efficient electricity with no additional ...
-
Manufactured by Schmidt Industries, Inc.based in USA
Schmidt Industries' location in Bay City, Michigan comprises over 35,000 square feet of state-of-the-art CNC manufacturing space and a 60-ton lift capacity. Because of the scale and variety of machining processes we offer, Schmidt Industries can accommodate nearly any size project. All of our equipment is built right here in the ...
-
Manufactured by Vapor Power Internationalbased in USA
Vapor Power electric steam boilers are designed to provide fast, efficient, and economical steam for heating and process through the use of electric resistance elements. The boiler controls automatically energize/de-energize steps of elements to maintain the desired steam pressure. All boilers utilize ASME pressure vessels and all electrical components are UL listed and are wired in accordance ...
-
Manufactured by Clean Burn, LLCbased in USA
The Clean Burn Model CB-1500 is rated at approximately 150,000 BTU/h. Low profile design for convenient installation. UL and CE listed for use as a unit heater or central (ducted) ...
-
Manufactured by Cutting Systems, Inc.based in USA
Shark HD CNC Plasma Cutting Machine is a High Definition plasma cutting system. Industrial grade precision and durability at an affordable price point. The perfect solution for light to medium industrial applications. Unitized construction means easy setup and installation. Hypertherm Pronest software will get the most out of every sheet of ...
-
Manufactured by Thierry Corporationbased in USA
Atmospheric plasma systems are designed for the applications of activation, cleaning and deposition of materials. The equipment is especially designed for the process of changing surface chemistry of one surface selectively without affecting another surface in the close proximity to it. It also has the ability to process low surface energy materials that are sensitive to damage from electrostatic ...
-
Manufactured by Allied Environmental Technologies, Inc.based in USA
Gasification is a century old technology, which flourished quite well before and during the second world war. Gasification can be broadly defined as the thermochemical conversion of a usually solid or liquid carbon-based material into a combustible gaseous product. The technology disappeared soon after the second world war, when liquid fuel became easily available. The interests in the ...
-
Manufactured by CMI Groupebased in BELGIUM
CMI designs, manufactures and maintains industrial steam production boilers marketed under the brand names Denapak and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you