Only show results in Connecticut? Ok

Waste-to-Energy Equipment

  • Used Oil/Pyrolysis Oil Distillation Plant

    Input material: Waste engine/motor oil, Plastic/tire pyrolysis oil, Lubrication oil. Output products: Diesel oil, waste gas, slag. Material of reactor: Q345R/Q245R/310S+Boiler plate/Stainless steel. Capacity/D: 3/5/10 ton. Certification: CE, ISO, SGS, BV. Reactor thickness: 14mm/16mm/18mm. Machine type: Batch type. Land request: 300 square meters.

  • Model EL 200B - Waste Oil Boiler

    Experience the EL 200B Boiler that comes with a ASME ceritifiedvessel construction - the only boiler vessel built specifically for waste oil from the ground up. The heavy carbon-steel construction is stronger and more efficient than cast-iron and coil-tube boilers provided by other brands. With a removable rear panel, the process for cleaning is ...

    By EnergyLogic, LLC based in Antioch, TENNESSEE (USA). from Waste Oil Boiler Product line

  • Preferred - Advanced Performance Burner

    The Preferred AP burner is a low NOx, high efficiency, natural gas and/or fuel oil fired burner for firetube and small watertube boilers. It features: 30 ppm NOx without FGR. Low excess air operation throughout the turndown range. High turndown (10:1) firing natural gas. .

    By Preferred Utilities Manufacturing Corporation based in Danbury, CONNECTICUT (USA). from W.N. Best Product line

  • Enviroburners - Biofuel Burners

    Biomass and waste gasification has emerged in the recent years as a replacement for conventional fuel oil and –gas applications. With biomass based gasification gas burners customers can reduce their CO2 – emissions and convert even the most challenging solid fuels / wastes into clean energy. Enviroburners has extensive experience of ...

    By Enviroburners OY based in Vantaa, FINLAND.

  • Feed Water Pre-Heaters

    A feed water pre-heater upstream of the boiler increases efficiency considerably. Return or feed water for a steam boiler is heated by the flue gasses from the boiler. The exchangers are often incorporated to pre-heat combustion air, heat process air or they are connected to drying chambers. On request the design, even of the connections, can be ...

    By Boilerworks A/S based in T√łnder, DENMARK. from Industrial Heat Exchangers Product line

  • Gasplasma - Gasification Technologies

    The core Gasplasma technology is a two-stage advanced conversion process. It combines two long standing and well proven technologies (gasification and plasma conversion) in a unique configuration. After the removal of valuable recyclates, the Gasplasma® process treats a wide range of non-recyclable feedstocks produced from residual municipal ...

    By Advanced Plasma Power Limited (APP) based in Swindon, UNITED KINGDOM.

  • TrueTech - Model TT DCB Series - Double Coil Quick Boiler

    Truetech TT DCB series compact high efficiency boilers are specially engineered and manufactured to be a reliable and long lasting source for hot water. Each component is carefully selected to ensure performance in even the most demanding application. These boilers are produced according to European Standard(EN 12897), are double enamel coated and ...

    By TrueTech based in DUDULLU/UMRANIYE, TURKEY.

  • Burners

    Burners comprise the heart of a combustion system.  Our staff members  have lived through the progression of burner objectives from maximum heat release through fuel efficiency, safe operation, and consuming difficult fuels to the control of NOx and unburned hydrocarbon emissions.  Today’s demands also include low maintenance ...

    By Tulsa Combustion based in Sand Springs, OKLAHOMA (USA).

  • OMNI - Model OWH-75 - Waste Oil Heaters

    Every OMNI waste oil heater is built with high grade stainless steel, and is backed with a non pro-rated warranty to match. From the Floating Crimped Heater Exchangers, to the Patented Flame Control System, our waste oil heaters will provide you with long lasting ROI.

    By EconoHeat Inc. based in Spokane, WASHINGTON (USA).

  • heat11 - Waste Heat Recovery Systems

    Do not let your money go up the chimney! Make best use of the waste heat in order to increase the energy efficiency of your plant. From the hot water preparation via the process heat supply to power generation - we find the optimum solution.

    By heat 11 GmbH & Co. KG based in GERMANY.

  • PyroGenesys - Model Bio-CCHP - Combined Cooling, Heat & Power Process

    The PyroGenesys PYROGASIFIER concept, is a unique combination of pyrolysis and gasification technology, that turns waste biomass into a decentralized supply of combined cooling, heat and power (CCHP). The Bio-CCHP trigeneration concept is designed to handle a much wider range of feedstocks than any other conventional gasifiers currently on the ...

    By PyroGenesys Ltd. based in Birmingham, UNITED KINGDOM.

  • Conveyors

    With decades of conveyor and material handling experience, CET excels at designing, building, and installing custom conveyor solutions for a wide variety of industries and processes.  CET conveyors do more than just move material from point A to point B.  They elevate and de-elevate materials, make complicated turns in tight ...

    By Cambridge EnTech (CET) based in Cambridge, MARYLAND (USA).

  • Fluidised Bed Combustion System

    Fluidised bed combustion with ash cooling and controlled ash recirculation. Ash cooling heat exchanger positioned outside of combustion area. Capacity: 500 kW - 50,000 kW. Fuels: Biomass, coal (anthracite and lignite). Waste heat recovery media: Thermal oil, steam, hot water.

    By INTEC Engineering GmbH based in Bruchsal, GERMANY.

  • Generate Cold From Waste Heat

    From small plants to industrial large scale plants – your project is in good hands. In the area of refrigeration plant construction, the dominating fields of activity over the past years were: split units, screwtype water chillers, turbo water chillers and absorption chillers in complex interconnections with diverse heat generators.AGO AG ...

    By AGO AG Energie + Anlagen based in Kulmbach, GERMANY. from Refrigeration Engineering Product line

  • Model EL 200H - Waste Oil Heater

    The EL 200H Waste Oil Heater has all the perks of the EL 140H and more! Its stainless steel heat exchanger is designed to avoid corrosion, warping and weld breakage. Constructed to last decades, not years. With an elevated fuel pack, the pump can be mounted at the fuel source—instead of on top of the tank—so the pump is flooded with ...

    By EnergyLogic, LLC based in Antioch, TENNESSEE (USA). from Waste Oil Heaters Product line

  • Phoenix - Model 10 - Waste Oil Electrical Generators

    The Phoenix Waste Oil Electrical Generator (genset) is a state-of-the-art generator system that is capable of utilizing waste oil products (i.e., used motor/equipment oil) or low cost Natural Gas to produce electricity for operational needs, to transfer excess power to a power grid, and/or provide heat to the ambient working environment (Combined ...

    By Phoenix Power Group LLC based in Cordova, TENNESSEE (USA).

  • Biomass or Waste Combustion Systems

    Renewable energy, energy efficiency and energy independence are a hot topics nowadays. One energy source, with a large potential is biomass. Biomass is generally considered to be one of the most important renewable energy sources. Biomass is the only renewable carbon source! Another important energy source is waste. Land filling waste is ...

    By Royal Dahlman BV based in Maassluis, NETHERLANDS. from Renewable Energy Gasification & Gas Purification Product line

  • Versatile Wood Boiler Systems

    Matured Wood Gasification Systems Logs up to 120 cm Waste Wood Whole Pallet For Small Straw & Miscanthus Bales. A German made rugged and indestructible boiler Fool proofed operation robust and easy to use control Good natured combustion behavior even with wet wood Rangingfrom15kW-180kW&130-450kW

    By Ensoleir based in Co Galway, IRELAND.

  • OMNI - Model OWB-9 - Waste Oil Boilers

    The OMNI OWB Series Hot Water Boiler is designed for years of industrial heating. Viessmann, the Worlds Largest Boiler Manufature’s cast iron Scotch Marine boiler design, perfectly engineered with OMNI Waste Oil burning technology brings unparalleled performance in a flexible package.

    By EconoHeat Inc. based in Spokane, WASHINGTON (USA).

  • High Efficiency Thermal Fluid Heating Systems

    Thermal Fluid Systems, Inc. is proud to offer the custom design and supply of high efficiency thermal fluid (sometimes called hot oil or Dowtherm) heaters and systems. The heaters and systems can be:

    By Thermal Fluid Systems, Inc. (TFS) based in Kennesaw, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you