Waste-to-Energy Services
-
Premium
Semiconductor Solutions
Enable extemely accurate temperature measurement solutions for the semiconductor industry. We know temperature plays a critical role in the semiconductor and integrated circuit industries. Advanced Energy's extensive semiconductor experience allows us to fully understand the temperature management challenges you face. We offer non-contact and contact-based options as well as our fiber optic ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA). from Thermal Processing Solutions Service line
-
Premium
Flat Panel Displays Solutions
Efficiently develop innovative flat panel displays for an incredibly wide range of industries. Advanced Energy is a leading provider of sputtering process power, offering a broad product portfolio — DC, pulsed-DC, and low-frequency AC units. And our portfolio is backed by worldwide engineering and support services. Benefit from field-proven performance, unique power-delivery control ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA). from Other Solutions Service line
-
Premium
Plasma-Based Glass Coatings Solutions
Be equipped with quick and stable power, fast arc detection, and low arc energy. Glass coating is rapidly advancing. Over the last 20 years, Advanced Energy has played a major role in its evolution. As new technologies change the industry, our dedicated team focuses on developing repeatable methods that improve throughput and yield. We pioneer and refine advanced DC, pulsed-DC, low-frequency AC, ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA). from Other Solutions Service line
-
Premium
Industrial Coatings Solutions
Increase film quality and stay at the forefront of your market. Industrial thin film coating is swiftly adapting as consumer demands drive stringent performance requirements. As a world leader in industrial-coating power systems, Advanced Energy’s process expertise and manufacturing capabilities help give you a competitive advantage. Benefit from local engineering support, worldwide ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA). from Other Solutions Service line
-
Waste Vitrification by Plasma
Consulting services include : - Flyash vitrification - Plasma furnace - Off-gas treatment - Byproducts from ...
By Waste-to-Energy Consulting based in Ottawa, ONTARIO (CANADA).
-
Transportation Fuels from Biomass and Waste Services
Biofuel is a generic term for several types of fuels made from biomass. Biofuels in solid, liquid or gaseous state can count on increasing interest from the general public and global warming perspective. They are renewable alternatives to fossil fuels, whose supply is ...
By Ingenia Consultants & Engineers BV based in Eindhoven, NETHERLANDS.
-
Customized Solutions
ICC is able to deliver customized turnkey waste-to-energy solutions on budget and on time when your needs are different to the Small Scale ...
By International Composting Corporation (ICC Group) based in Sidney, BRITISH COLUMBIA (CANADA).
-
Wagner - Custom Manufacturing Services
Cladding is the bonding together of dissimilar metals. It is different from fusion welding or gluing as a method to fasten the metals together. Cladding is often achieved by extruding two metals through a die as well as pressing or rolling sheets together under high ...
By Wagner Plate Works (WPW) based in Houston, TEXAS (USA).
-
The Energy-From-Waste Plant Of Melfi
In the last twenty years, the problem of waste management in Italy has been further exacerbated by the amount of waste generated by community and industrial processes.Although it represents an available, renewable source from which to recover energy and materials, most waste (more than 70%) is still sent to landfills, without exploiting its energy potential, and only a minor fraction is ...
By Fenice Spa - Group EDF based in Rivoli Cascine Vica, ITALY.
-
Waste to Energy & Recycling Solutions
Waste to Energy Plant such as the one built in Ethopia which will help to divert over 550,000 Metric Tonnes of waste from landfills per year and help to produce over 200GWh per year of clean renewable power as well as separate recyclable components for ...
By NARGIS Renewable Energy Solutions based in UNITED KINGDOM.
-
Refuse-derived Fuels: From Waste to Energy
Many industries burn refuse-derived fuels and solid recovered fuels as energy source. Biomass fraction of RDF or SRF is determined using CEN 15747 or prCEN/TS 15440 for companies in Europe. Beta Analytic is committed to provide CEN 15747 and prCEN/TS 15440 ...
By Beta Analytic Inc. based in Miami, FLORIDA (USA). from Fuel Tested Service line
-
Repair & Overhaul Services
State-of-the-art inspection and repair equipment is used to restore aerospace components and systems to like-new condition. Our highly trained workforce is committed to provide the highest quality and value to achieve total customer ...
By Magellan Aerospace based in Mississauga, ONTARIO (CANADA).
-
Liquid Biofuels
Looking for new growth in biofuels? Leverage our proven technologies, including both thermal and bio-technical conversion to nextgen biofuels. What if there was a cost-effective way to produce sustainable biofuels that could directly replace fossil fuels? The future is ...
By VTT Technical Research Centre of Finland based in FINLAND. from Bioeconomy Service line
-
CDM Projects Development
Kyoto protocol has brought new opportunities to countries and companies of non-Annex A to receive finance and advanced technology for emission reduction In Vietnam, it has helped realization of small hydro power projects, biogas capture and utilization, waste heat recovery, energy ...
By GreenField consulting & development (GFD) based in Hanoi, VIETNAM.
-
Packaged Heat Recovery Solutions
The system that captures wasted heat and turns it into electricity that you can use or sell back to the grid. For the first time, Genset installations can benefit from proven Organic Rankine Cycle technology to recapture lost energy and turn it into money. The verdesis packaged ORC captures heat from a wide range of system utilizing various engine types. Typical payback periods for applications ...
By Verdesis Services UK Ltd based in Derbyshire, UNITED KINGDOM.
-
Plasma Power Different
Plasma Power has taken a different approach to serving the market. Unlike many others, we have a thermal plasma lab and test what we offer for sale. These innovations afford high levels of production at very low emissions from virtually any feedstock, at a capital cost that is significantly less than current conventional ...
By Plasma Power, LLC based in Fort Lauderdale, FLORIDA (USA).
-
Offer Turn-key Solutions
Our diverse, specialized and experienced team of partners offer turnkey solutions for a wide range of projects from concept to completion including: Commercial facilities heating utilizing local or site generated waste streams On farm agricultural products drying utilizing on farm or local biomass Agricultural facilities heating utilizing local biomass Forestry waste utilization to energy ...
By Biomass Systems Supply based in Chico, CALIFORNIA (USA). from What We Do Service line
-
Custom Nozzle Fabrication Services
BETE can perform every procedure in-house, from casting to machining to assembly. BETE uses three basic spray nozzle fabrication processes: injection molding, machining from bar stock, and investment casting. Injection molding is used for large quantities of nozzles made from plastics such as PVC, ABS, and PVDF. Bar stock machining is often used for metal alloy and plastic nozzles when relatively ...
By BETE Fog Nozzle, Inc. based in Greenfield, MASSACHUSETTS (USA).
-
Services
Registered as a non-profit association, BalticNet-PlasmaTec (BNPT) is an international cluster – located in Greifswald, Germany – which stands for a technology and market-oriented cooperation of science, research and economics in the field of plasma technology. As one of the most important plasma technology clusters in Europe, BNPT’s aim is to support technology- and ...
By BalticNet-PlasmaTec based in Greifswald, GERMANY.
-
Repair Services
We repair and maintain everything that we sell and rent. Maine Oxy has fully equipped service departments at our Auburn, Maine and Brewer, Maine facilities. Our service technicians are factory-trained and kept up-to-date on equipment repair by a continuing program of education and specialty ...
By Maine Oxy based in Auburn, MAINE (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you