waste gasification Articles
-
Measuring Gases Produced by Waste Gasification to Improve Control and Efficiency
Waste gasification is a type of waste to energy process where waste material is used as a fuel to create heat, electricity or other chemical products. Specifically, in waste gasification, the waste material is decomposed in such a way to produce gaseous products, often known as syngas, a combination of hydrogen, carbon monoxide and some carbon dioxide.Conventional incineration uses heat and ...
-
Measuring Gases Produced by Waste Gasification to Improve Control and Efficiency
Waste gasification is a type of waste to energy process where waste material is used as a fuel to create heat, electricity or other chemical products. Specifically, in waste gasification, the waste material is decomposed in such a way to produce gaseous products, often known as syngas, a combination of hydrogen, carbon monoxide and some carbon dioxide.1 Conventional incineration uses heat and ...
-
Analysis of availability and accessibility of hydrogen production: An approach to a sustainable energy system using methane hydrate resources
It is considered that use of hydrogen as an energy source may contribute to environmental improvement and provide an alternative energy system. Moreover, it is anticipated that hydrogen will be in great demand in the near future for use in such vehicles as fuel cell-based cars. Research and development of a number of advanced methods of hydrogen production (OTEC, water photolysis using a ...
-
Solid waste gasification pollution abatement - Case study
Catalytic Products International has partnered with a Gasification System Designer in the design and supply of a unique thermal oxidizer for use with a closed loop batch pyrolysis gasification system. The gasifier is engineered to create a clean combustible syngas from a broad spectrum of dissimilar carbonbased solids, liquids, and other feedstocks. The QUADRANT NR – SEVERE DUTY Thermal ...
-
Green Energy: From Waste to Syngas Production
Syngas production from waste gasification is one way to produce renewable energy. However, varying waste compositions can make gasification challenging to control, resulting in inconsistent syngas compositions. Closely monitoring gas composition and adjusting process conditions during gasification can ensure consistent, high-quality syngas production. Infrared sensors are the ideal solution for ...
-
Hydrogen-rich synthesis gas production from waste wood via gasification and reforming technology for fuel cell application
The purpose of this study was to establish a fuel process for an advanced power generation system in which hydrogen-rich synthesis gas, as the fuel for the molten carbonate fuel cell (MCFC), can be extracted from biomass via gasification and reforming technologies. Experiments on waste wood gasification were performed using a bench-scale gasification system. The main factors influencing hydrogen ...
-
Plasma resource recovery technology –converting waste to energy and valuable products
Abstract Plasma Resource Recovery (PRR) is a revolutionary technology that can treat virtually any type of waste by combining gasification with vitrification. Vitrification produces inert slag that can be used as a construction material. Gasification produces a fuel gas containing carbon monoxide (CO) and hydrogen (H2), used for cogeneration of electricity and steam. The plasma fired eductor ...
-
Energy from biomass and waste – case studies in China
With its vast territory and abundant biomass resources, China appears to have suitable conditions to develop biomass energy. It has long been recognised that it is important to develop advanced technologies for conversion of biomass into clean and convenient fuels in order to raise the efficiency of biomass energy utilisation and alleviate air pollution. Through past efforts some progress in ...
-
Preliminary studies of lignocellulosics and waste fuels for fixed bed gasification
This study was carried out to understand the decomposition behaviour of a range of biofuel and waste feedstock during gasification in a downdraft gasifier. A laboratory scale large sample thermogravimetric analyser (LSTA) is used which allows the data on burn-out characteristics of different fuel particles to be measured under agitated conditions. The conditions chosen simulate the combustion ...
-
Waste-to-Energy Gasification Plant Case Study
Summary: Progressive civic leaders in Covington, Tennessee, knew there was a better solution to disposing of wood waste and sludge – the ACE DDSF-1000 gasifier (12 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you