Only show results available in Massachusetts? Ok

waste oil heat (Waste Oil Energy) equipment

  • Premium

    Anguil - Industrial Energy & Heat Recovery Solutions

    Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Other Product line

  • Premium

    Dutch Incinerators - Thermal Oil for Heat Transfer Media

    Thermal oils or thermal fluids are heat transfer media that are used to transfer thermal energy in those applications or processes where high temperatures are required.

    By Dutch Incinerators BV based in Sint Jansteen, NETHERLANDS. from Waste Heat Recovery Product line

  • Model CE-340 - Waste Oil Boiler

    Our CE-340 Waste Oil Boiler brings cost-saving waste oil technology to hydronic heating systems. Featuring many of the same design innovations found in our line of waste oil furnaces, the CE-340 boiler allows businesses to create free hot water for radiant heat or other purposes by burning waste oil. It’s clean, safe and guaranteed to cut ...

    By Clean Energy Heating Systems based in Honey Brook, PENNSYLVANIA (USA). from Boiler Product line

  • Power Generation

    Lipten doesn’t stop at just steam generation; we take it to the next step to integrated power generation. Whether single purpose or CHP (Combined Heat and Power), we can put together a system tailored to your requirements. Whatever the source, be it gas, oil, biomass or waste heat, Lipten can turn it into useful power through clean, ...

    By Lipten Company based in Wixom, MICHIGAN (USA).

  • Clean Burn - Model CB 140 - Waste Oil Furnace

    The Clean Burn Model CB-140 is the smallest and most economical Clean Burn used-oil furnace in terms of initial cost. It produces approximately 140,000 BTU/hr. and is ideal for small garages, shops, and workspaces.

    By Clean Burn, LLC based in Janesville, WISCONSIN (USA). from Waste Oil Furnaces Product line

  • Model EL 140H - Waste Oil Heater

    The EL 140H Waste Oil Heater’s stainless steel heat exchanger is designed to prevent corrosion, warping and weld breakage. Built to last decades, not years. The flame retention head patented design creates a hotter flame than competitor brands for complete fuel combustion and highest heat output. Less ash is produced resulting in longer ...

    By EnergyLogic, LLC based in Antioch, TENNESSEE (USA). from Waste Oil Heaters Product line

  • Clean Burn - Model CB-1750 - Waste Oil Furnace

    The Clean Burn Model CB-1750 produces approximately 175,000 BTU/hr. and is the smallest of the low profile designs, making it ideal for numerous applications and convenient installations. As a broad guideline, the Model CB-1750 is suitable for facilities generating smaller quantities of waste oil annually

    By Clean Burn, LLC based in Janesville, WISCONSIN (USA). from Waste Oil Furnaces Product line

  • Cire Technologies - Batch Ovens

    Cire Technologies designs and fabricates custom batch ovens, specializing in difficult applications where off-the-shelf ovens are not applicable.  Batch ovens include drying, heat treating and curing applications.  Our batch oven systems are characterized by uniform heat transfer and energy efficient design.  Because we are limited ...

    By Cire Technologies, Inc. based in Mountain Lakes, NEW JERSEY (USA). from Dryers and Ovens Product line

  • Clean Burn - Model CB-2500 - Waste Oil Furnace

    The Model CB-2500 waste oil furnace produces approximately 250,000 BTU/hr and is extremely popular at facilities such as 2 to 4 bay auto repair and truck service shops. The CB-2500 is highly versatile and reliable and can be easily ceiling mounted or used in conjunction with a Clean Burn Recycling Center. Although many factors affect furnace ...

    By Clean Burn, LLC based in Janesville, WISCONSIN (USA). from Waste Oil Furnaces Product line

  • Steam-Flo - Low Pressure Steam Generators

    The Sioux Steam-Flo steam generator is a perfect source of low pressure steam for a variety of commercial and industrial applications. This unit can be used in place of a conventional boiler. The generators produce from 370-1,725 lbs. (168- 782kg) per hour of saturated steam in minutes. Sioux has manufactured the Steam-Flo® steam generator ...

    By Sioux Corporation based in Beresford, SOUTH DAKOTA (USA). from Other Products Product line

  • Cire Technologies - Flotation Dryers

    Cire Technologies supplies flotation dryers to the full range of paper, film, foil and textile web converting industries. The flotation dryers and ovens pictured above include; a one hundred twenty feet of drying for a three stage coating process with the web floating between nozzles 1/4 inches apart: a four zone tower oven with drying, curing and ...

    By Cire Technologies, Inc. based in Mountain Lakes, NEW JERSEY (USA). from Dryers and Ovens Product line

  • Probus - Universal Oil Burners

    Probus Universal Oil Burners are burners that burn different kinds of fuels starting from low quality fuels and waste oils up to high quality diesel or alcohol type fuels. Probus burners are simple and efficient and require the least amount of interaction or maintenance, especially when burning low quality fuels. Reliability, ease of operation and ...

    By Probus based in Riga, LATVIA.

  • EIS - Energy Efficiency Systems

    The cost of energy contines to rise inexorably and this is unlikely to change in the coming years. EIS specialise in the design of systems that minimise the use of energy and many of our systems operate autothermally, in flameless mode, without the use of any support fuel. In some cases, when sufficient solvent is present, they can even become ...

    By Environmental Integrated Solutions (EIS) based in Halesowen, UNITED KINGDOM. from AIr pollution Control Technology Product line

  • Model CE-180 - Waste Oil Furnace

    Our CE-180 Waste Oil Furnace is a strong performer for a 3 to 6 bay garage. With up to 175,000 BTU’s of output coupled to an innovative design, it’s a cost-effective and eco-friendly way to heat garages, workshops and other small to medium-sized spaces. And thanks to its ability to turn used motor oil, transmission fluid and other ...

    By Clean Energy Heating Systems based in Honey Brook, PENNSYLVANIA (USA). from Furnaces Product line

  • Organic Rankine Cycle

    The R&D Dynamics AdvancedPower™ 170 kW ORC (Organic Rankine Cycle) system has been designed to generate electricity from low grade waste heat. At its heart is a reliable, high efficiency, foil gas bearing supported turboalternator.

    By R & D Dynamics Corporation based in Bloomfield, CONNECTICUT (USA).

  • Allied - On-Site Cogeneration Systems

    Cogeneration is a variation of distributed generation, but it is an often misused and misunderstood term.  A common thought is that cogeneration means running a generator in parallel with the utility grid, or 'co-generating'.  While this is often done, this is not the meaning of the term. Cogeneration is simply using one energy source to ...

    By Allied Environmental Technologies, Inc. based in Seal Beach, CALIFORNIA (USA).

  • Model B-Line - Shell and Straight Tube Heat Exchanger

    B-Line heat exchangers are fabricated with the distinctive AIC helically corrugated tube design. Intended for use with high fluid flows and low temperature variances, these robust, compact units are ideal for many residential and industrial applications. Their complete stainless steel welded structure ensures product strength and high quality ...

    By AIC Inc. based in Oakville, ONTARIO (CANADA).

  • Allied - On-Site Power Generation Genset Systems

    Cogeneration is a variation of distributed generation, but it is an often misused and misunderstood term.  A common thought is that cogeneration means running a generator in parallel with the utility grid, or 'co-generating'.  While this is often done, this is not the meaning of the term. Cogeneration is simply using one energy source to ...

    By Allied Environmental Technologies, Inc. based in Seal Beach, CALIFORNIA (USA).

  • Model CE-140 - Waste Oil Furnace

    The Clean Energy Heating Systems CE-140 Waste Oil Furnace is an entry level waste oil heater that’s perfect for a garage with 1 to 4 bays. With up to 140,000 BTU’s of heating output coupled to our innovative new design, it’s a very cost-effective way to heat smaller spaces. Best of all, thanks to the CE-140’s ability to ...

    By Clean Energy Heating Systems based in Honey Brook, PENNSYLVANIA (USA). from Furnaces Product line

  • Model CE-330 - Waste Oil Furnace

    The Biggest Furnace & The Best Savings, for up to 9,000 sq. ft. The Clean Energy Heating Systems CE-330 Waste Oil Furnace is our largest heater, and is perfect for quickly and effectively heating a garage with 7 or more bays. With up to 325,000 BTU’s of output coupled to our innovative new furnace design, the CE-330 is truly a hot ...

    By Clean Energy Heating Systems based in Honey Brook, PENNSYLVANIA (USA). from Furnaces Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you