Wind Energy Applications available in Eritrea

  • Premium

    Industrial gas detection solutions for wind turbines / power generation industry

    DOD Technologies provides products in various applications that utilize, manufacture, or expel toxic, corrosive, and combustible gases. However, we also provide solutions outside of gas detection. Wind turbines utilize large blades propelled by the wind to generate renewable energy. One major challenge with wind is that it doesn’t come from the same direction every day. Therefore, wind turbines are fixed to rotating head that can optimize the collection of wind energy. This rotating head utilizes bearings...

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

  • Premium

    VOC abatement equipments for power generation & distribution

    Create more efficient power production.

    By Munters based in Amesbury, MASSACHUSETTS (USA).

  • Premium

    Restricting Birds and Wildlife -

    Prevent birds and wildlife from entering dangerous areas, as well as preventing mess and liabilities from animal mess. Bird-X products reduce and eliminate birds and wildlife from entering unwanted or dangerous areas for the good of all parties involved. Birds and animals are not harmed by Bird-X products - which are designed to make areas uncomfortable and unwelcoming to animals, forcing them to go elsewhere. Bird-X products have been developed since 1964, hold an excellent BBB rating, and we offer GSA Advantage....

    By Bird-X Inc. based in Chicago, ILLINOIS (USA).

  • Premium

    Meteorological sensors for wind turbine control

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their...

    By OTT HydroMet based in Kempten, GERMANY.

  • Unmanned surface vehicle solutions for offshore wind farm

    The use of a USV can assist in surveying a wind farm to obtain sufficient and reliable information on the nature of the seabed to permit a safe and economic design, the installation and maintenance, which helps developers achieve minimum investments and the highest efficiency.

    By OceanAlpha Group Ltd. based in Wan Chai, CHINA.

  • Instant OPEX savings for off-grid and DG supported telecom tower infrastructure

    With modular design and robust operating capabilities, Firefly’s Hybrid Systems are easily retrofitted onto existing infrastructure, resulting in reduced diesel use, longer servicing intervals and extended DG operating life.

    By Firefly Hybrid Power Ltd based in East Kilbride, UNITED KINGDOM.

  • Solar Solutions Utility Industry for

    SolarReserve’s industry-leading solar thermal technology features an integrated molten salt energy storage system that provides a stable and predictable electricity dispatch similar to that of conventional utility power facilities—without any associated harmful environmental emissions or volatile fuel costs. Additionally, our solar thermal power plants with integrated energy storage are cost-competitive with most new build fossil fuel or nuclear technology.

    By SolarReserve, LLC. based in Santa Monica, CALIFORNIA (USA).

  • Wind monitoring for the offshore wind energy

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Cast iron casting solutions for wind power industry

    Cast iron casting solutions for wind power industry.

    By Calmet based in Wilmington, DELAWARE (USA).

  • Industrial butterfly valve solutions for power generation sector

    The power generation sector is an essential service industry that uses technologies ranging from the mature steam turbine to pioneering marine current turbines. Since privatisation in the UK in 1990, the main objective of the sector has been profitability for shareholders, although issues such as health, safety, sustainability and fuel poverty have also become increasingly important on the corporate agenda.

    By Hobbs Valve based in Caerphilly, UNITED KINGDOM.

  • Sonic detection and ranging technology solution for wind energy industry

    Wind Energy has brought new life to the wind measurement industry, including SoDAR. With wind turbine hub heights reaching over 100m and blade spans of up to 80m, measurements across the entire blade swept area are becoming critical. SoDAR provides that information and ASC`s SoDARs offer more.

  • LIMPET Offshore Personnel Transfer System

    Limpet Technology is embarking on the development of a new access solution that focuses on allowing technicians and loads to transfer between vessels and offshore wind turbines more safely and in higher sea states. The overarching technical objective is to deliver a solution that can be proven to deliver safe and reliable access to and from offshore wind turbines in sea states up to and beyond 2.5 metres Significant Height (Hs).

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Feed-in tariffs while avoiding low price periods

    Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the grid.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Glass Fabrics for Wind Energy

    STEKLONiT offers solutions for wind energy, one of the most promising sectors of electric-power industry. Thanks to inherent high quality, physical-mechanical properties, light weight, STEKLONiT’s glass fabrics are used in manufacture blades and tubes of wind power generators. Products can be manufactured according to a customer`s requirements and delivered to any place in the world.

    By Steklonit JSC based in Moscow, RUSSIA.

  • Photovoltaic power solutions for the wind power case sector

    Photovoltaic power solutions for the wind power case sector.

    By Anhui Leiton Electric Technology Co., Ltd. based in Hefei, CHINA.

  • Fabrication solutions for the wind energy industry

    Modern wind turbines include a variety of components from BRÜCK. Our products are found in the power transmission in the form of bearings, flanges, gear and generator parts as well as in the pitch and gondola housing. Due to our vast depth in manufacturing and the enormous production capacity, we can cover the usual in the wind power industry requirements and high demands in the situation. Many global players in the wind energy sector benefit from BRÜCK proposed solutions for structural design of...

    By BRÜCK GmbH based in Saarbrücken-Ensheim, GERMANY.

  • Adhesive technology solution for renewable energies industry

    The debate around the phase-out of nuclear power has highlighted it once again: there`s no getting away from renewable energy. Improvements in efficiency and performance are the challenges that manufacturers must now face. And it is precisely here that the innovative adhesive technology from Lohmann plays an important role. The more reliably and efficiently components are connected, the longer-lived and more economical the overall system is – irrespective of whether energy is obtained from solar systems or...

    By Lohmann GmbH & Co.KG based in Hebron, KENTUCKY (USA).

  • Plate and Angle Roll and Automatic Rolling Systems for Wind Power

    DAVI 4 roll along with our exclusive “High Productivity Package” is the most widely purchased system by top wind tower manufacturers to produce their wind tower cylinders and cones, in semi-automatic mode, in as short as 10-15 minutes only, with one only operator.

    By DAVI - Promau Group based in Cesena, ITALY.

  • Wind power solutions for the microgrids sector

    Microgrids state-of-the-art wind power with integrated storage and full controllability for the smartest of grids.

    By XANT NV based in Brussels, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you