Wind Energy Applications in California
-
Ammonit Wind Resource Assessment in Cold Climates
For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems ...
By Ammonit Measurement GmbH Distributor in San Jose, CALIFORNIA (USA).
-
Energy from waste wood
If waste wood is utilized, woody biomass can be a form of renewable energy that complements solar and wind. Furthermore, gasifying the wood to produce electricity is a lot cleaner than disposing via controlled burns, and has a lower carbon footprint than decomposition, since decomposition often produces methane, and reverts all of the carbon to carbon dioxide, whereas with gasification, a portion is sequestered as ...
By All Power Labs based in Berkeley, CALIFORNIA (USA).
-
On-demand renewable energy to assist solar/ wind microgrids
Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind ...
By All Power Labs based in Berkeley, CALIFORNIA (USA).
-
Feed-in tariffs while avoiding low price periods
Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the ...
By All Power Labs based in Berkeley, CALIFORNIA (USA).
-
Ammonit Wind Ressource Assessment Systems
Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems ...
By Ammonit Measurement GmbH Distributor in San Jose, CALIFORNIA (USA).
-
Operational modal analysis software solution for wind energy sector
There are several reasons why ARTeMIS software for Operational Modal Analysis (OMA) is a popular tool in wind turbine ...
By Structural Vibration Solutions A/S Distributor in Pasadena, CALIFORNIA (USA).
-
Wind Turbine and Generator
Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator ...
By Stanford Magnets based in Irvine, CALIFORNIA (USA).
-
Mid-level wind harvesting solutions for augmenting wind farms sector
With over 140 gigawatts available from building out already existing wind farms, Wind Harvesters could change the world of renewable energy as we know it. When fully developed, they would produce enough energy to power 280 million homes (using 5000 kWh per year), replacing 1000 coal-fired power plants. Our turbines can both add to the capacity of existing wind farms and increase the energy output of the existing ...
By Wind Harvest International, Inc. based in Sacramento, CALIFORNIA (USA).
-
Adhesive technology solution for renewable energies industry
The debate around the phase-out of nuclear power has highlighted it once again: there's no getting away from renewable energy. Improvements in efficiency and performance are the challenges that manufacturers must now face. And it is precisely here that the innovative adhesive technology from Lohmann plays an important role. The more reliably and efficiently components are connected, the longer-lived and more economical the overall system is – irrespective of whether energy is obtained from solar systems or ...
By Lohmann GmbH & Co.KG Office in San Jose, CALIFORNIA (USA).
-
Mid-level wind harvesting solutions for distributed energy production sector
Conventional energy supplies are more and more vulnerable to climate change-induced disruptions. Centralized power supplies and long transmission lines create a system where extreme weather events produce life-threatening power losses. The solution for many towns and high-energy using facilities lies in more distributed energy projects. Having medium-scale energy generation on-site or nearby eliminates the need for long transmission lines relying on centralized facilities to supply ...
By Wind Harvest International, Inc. based in Sacramento, CALIFORNIA (USA).
-
AssetCare - Asset Management Platform Software for Connected Wind
AssetCare™ uses AI and analytics to optimize both performance and Operations & Maintenance management to deliver increased production at a lower cost. We analyze every aspect of the health and performance of your turbines, predicting potential failures, and identifying enhancement ...
By mCloud Technologies Corp. Office in San Francisco, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you