Distributed Wind Equipment For Wind Energy In USA
-
Manufactured by Pecos Wind Powerbased in USA
The PW85 is an 85kW distributed wind turbine for behind-the-meter (onsite) and distribution-level (community-serving or community wind) power generation. Our design leverages an induction generator, a gearbox, and an extensive portfolio of commercially-off-the-shelf components for high reliability and serviceability. Pecos’ cost advantage is founded on two key advantages, optimization ...
-
Manufactured by R.L. Components Ltd.based in CANADA
R.L. Components has been manufacturing transformers, reactors, and numerous other coils and windings for the high voltage T & D industry since the 1970s. R.L. Components also has the capabilities to do complete coring, installations and testing in order to provide a finished ...
-
Manufactured by Planetary Systems, Inc.based in USA
Darrieus-Savonius type wind unit featuring Mag-lev technology for small spaces where infrastructure may be limited and low noise levels are very good. These units have been tested at our facility and are very reliable, with a 20 year life span with virtually no maintenance. Includes our new TGW MPPT wind controller. This is an axial flux generator which can produce large amounts of power at low ...
-
Manufactured by Ducted Wind Turbines, Inc.based in USA
Ducted wind turbines are not a new idea. The initial idea was circulating around in the 1920's. The basic premise is illustrated in the sketch below. A duct surrounding the rotor captures more of the oncoming wind, directing it through the rotor to increase the amount of wind energy the rotor ‘sees’. While a proper duct design is key a performance increase, the additional cost is even ...
-
Manufactured by Bergey Wind Power Co.based in USA
With a rotor diameter of 2.5 meters (8.2 ft) and a peak output spiking over 2,000 watts the Excel 1 is a perfect system upgrade for current owners of solar-only off-grid systems along with light telecom and other high reliability off grid applications. Following the same simple design as the larger Excel turbines, the Excel 1 has been a favorite tool for experienced renewable energy practitioners ...
-
Manufactured by EWT Holdings N.V. / EWT B.V.based in NETHERLANDS
Maximize your annual energy output when (re)powering medium wind distributed energy sites; The DIRECTWIND 58 is the result of EWT commitment to continuous innovation and improvement. This 58-metre pitch-controlled, variable speed wind turbine is designed to deliver higher annual energy outputs in medium wind speed (class IIA) sites than any similarly rated turbine. Optimized for distributed ...
-
Manufactured by Maddox Industrial Transformer, Llc.based in USA
These heavy duty transformers are ideal for substation yards and power distribution line-ups. ...
-
Manufactured by Bergey Wind Power Co.based in USA
The BWC Excel-R is a modern 7 meter (23 ft) diameter, 7.5 kW wind turbine designed for high reliability, low maintenance, and automatic operation in adverse weather ...
-
Manufactured by Aeronautica Windpower, LLCbased in USA
Need a turbine to maximize a FIT program in your country? In an age of King-sized wind turbines designed for wide open spaces or off shore, Aeronautica Windpower is proud to introduce a 500 kW turbine specifically aimed at countries or local governments favoring distributed generated wind power incentivized to be capped at a specific nameplate level for maximum Returns On Investment (ROI). The AW ...
-
Manufactured by Aeronautica Windpower, LLCbased in USA
When King-Sized Turbines Are Just Too Large: In an age of King-sized wind turbines designed for wide open spaces, Aeronautica Windpower is proud to introduce the 750 Series: Three-Quarter megawatt, 'Queen-size' machines designed for 'distributed wind' applications. Many good wind sites just cannot accommodate huge, utility-scale turbines. It is also ideal to be utilized for maximization of many ...
-
Manufactured by Surface Combustion, Inc.based in USA
The Uni-DRAW batch tempering furnace is a companion furnace to the Allcase Batch Integral Quench Furnace. Designed for pre-heating and tempering, the Uni-DRAW can also be used as a stand-alone heat-treating system. The unique round design results in an efficient circular wind flow along the inside of the furnace wall and is covered by the U.S Patent No. ...
-
Manufactured by AMSC (American Superconductor)based in USA
Modular solution to regulate voltage and power factor at key grid locations. AMSC’s interconnection & reactive power compensation solutions ensure high network performance and stability. AMSC’s D-VAR® (Dynamic Volt-Amp Reactive) system is a powerful, cost-effective way to provide continuous voltage regulation, improve voltage stability, meet interconnection requirements and ...
-
based in ICELAND
With the increasing demand for clean energy Wind Energy has become the worlds fastest growing electricity generation technology. Vista Data Vision is a powerful software for studying the expected outcome from a Wind Site as well as comparing Wind Turbine"s real performance to the design ...
-
Manufactured by Magnetic Metals Corporationbased in USA
The tape wound toroidal core approaches the perfect magnetic circuit configuration as well as permitting the most efficient application of high permeability magnetic alloys. The physical and magnetic characteristics of the toroidal shape reveal many features which contribute to this near-perfect circuit. For instance, the air gap in the magnetic path is so small that it can be considered ...
-
Manufactured by Planetary Systems, Inc.based in USA
Darrieus-Savonius type wind unit featuring Mag-lev technology for small spaces where infrastructure may be limited and low noise levels are very good. These units have been tested at our facility and are very reliable, with a 20 year life span with virtually no maintenance. Includes our TGW MPPT wind controller. This is an axial flux generator which can produce large amounts of power at low wind ...
-
Distributed by Scientific Sales, Inc.based in USA
Developed from the standard Wind Tracker, the Marine Wind Tracker has special features for shipboard use. Wind speed is displayed in your choice of units: KNOTS, MPH, KM/H, MIS. Maximum wind speed is saved on the display until reset by the operator. Wind direction information is clearly displayed on a circular pattern of LEDs. Bold front panel graphics give a quick indication of wind angle ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you