Horizontal Axis Wind Turbine (HAWT) Equipment For Wind Energy In Asia & Middle East
-
Manufactured by E- Novasolarbased in ITALY
The horizontal axis turbine Airforce 1.0 is the first micro turbines can accede directly at feed-in tariff . The design studied in the wind tunnel and the unique solution of the double tail make this turbine a concentrate of technology that allow a high sensitivity to wind also at low speed and an exceptional range of exploitable wind from 3.5 to 25 m / s with the possibility of self-orientate ...
-
Manufactured by Leviathan Energy LLC.based in USA
The technology is in the developmental stage.) This takes the same technology as for underwater turbines and applies it to wind. The main product will be a ten-meter blade diameter horizontal axis turbine with capacity of 50 kilowatt. Other turbines of the same size can only produce around 20 kilowatt. This is an important breakthrough for intermediate size wind turbines as it may make their cost ...
-
Distributed by Xinda Green Energy Co.Limitedbased in CHINA
A wind turbine, which is installed on top of a tall tower, collects kinetic energy from the wind and converts it to electricity that is compatible with a home's electrical system. In a normal residential application, a home is served simultaneously by the wind turbine and a local utility. If the wind speeds are below cut-in speed (7-10 mph) there will be no output from the turbine and all of the ...
-
by WindCyclebased in HONG KONG
Design features: -Blade Profile: This turbine blade has two airfoils in different areas. the first near blade root area has Eppler 555 (E555-il) general aviation airfoil and the near blade tip has Eppler 216 (E216) low Reynolds number airfoil. ...
-
Manufactured by SIMEC Atlantis Energybased in UNITED KINGDOM
The SeaGen system designed for floating or surface piercing foundations is an up to 1.0MW horizontal axis turbine complete with an active pitch. The full turbine weighs approximately 100 tonnes in air and has a design life of 25 years. Rotor diameter can be provided to suit the deployment and system redundancy plus accessibility combine to maximise reliability ...
-
Manufactured by Smart Energy Corporationbased in TAIWAN
1. Slow start-up speed, high wind energy utilization, beautiful appearance and low vibration. 2. Precise injection molding blades, with optimized design of aerodynamic profile and structure, blades have the following advantages: High energy utilization rate contributes to annual power generation. 3. The generator adopts rare earth such as iron boron permanent magnet brushless external rotor ...
-
Manufactured by RexCo Technologybased in CHINA
Low start up speed, high wind energy utilization. Amazingly quiet operation with minimal vibration. Easy installation, tube or flange connection optional. New art of precision injection molding blades with aerodynamic shape and structure, high efficiency.. Body of casting aluminum alloy, with 2 bearings swivel makes it stronger.. Patented AC PMG with special stator, effectively reduce torque, ...
-
Manufactured by Qingdao Renergy Equipment Co., Ltd.,based in CHINA
Technical parameter RW-30kw variable pitch Technical parameters 13.5V Wind rotor diameter (m) 13.5 Blade material and quantity Fiber glass reinforced * 3 Rated power / max power (w) 30k/35k Rated wind speed (m/s) 10 Rated rotating speed (rpm) 90 Working wind speed (m/s) 3-30 Startup wind speed (m/s) 2.5 Survived wind speed (m/s) 60 Working voltage (v) DC240V(off grid) / DC400V(on grid)AC240 ...
-
Manufactured by RexCo Technologybased in CHINA
Low start up speed, 3 or 5 blades optional for different wind speed areas, high wind energy utilization. Amazingly quiet operation with minimal vibration. Easy installation, tube or flange connection optional. New art of precision injection molding blades with aerodynamic shape and structure, high efficiency. Body of casting aluminum alloy, with 2 bearings swivel makes it stronger. Patented AC ...
-
by WindCyclebased in HONG KONG
This wind turbine calculator is a comprehensive tool for determining the power output, revenue, and torque of either a horizontal-axis (HAWT) or vertical-axis turbine (VAWT). You only need to input a few basic parameters to check the efficiency of your turbine and how much it can earn you. You can use our tool as either a HAWT or a VAWT calculator – to change the turbine type, simply choose ...
-
Manufactured by SIMEC Atlantis Energybased in UNITED KINGDOM
The AR1500 is a Lockheed Martin designed, 1.5MW horizontal axis turbine complete with active pitch and yaw capability. The nacelle weighs approximately 150 tonnes in air and has a design life of 25 years. The rotor diameter is 18 meters and all key operational systems have triple redundancy built in to maximise reliability offshore. ...
-
based in CHINA
Silent Wind Turbine. The Horizontal Axis Wind-Power Turbine ( HAWT ) is a new product designed. We started the research on HAWT 15 years ago. Now many of the famous experts the world wide have accepted such new technology and this technology will definitely lead the development of the small and middle size wind-power ...
-
Manufactured by SIMEC Atlantis Energybased in UNITED KINGDOM
SeaGen U is a 1.5MW horizontal axis turbine complete with an active pitch system taken from the SeaGen-S series development, and yaw capability from the AR1500. The full turbine weighs approximately 150 tonnes in air and has a design life of 25 years. The rotor diameter is 20 meters and all key operational systems have redundancy built in to maximise reliability ...
-
Manufactured by RexCo Technologybased in CHINA
Low start up speed, 3 or 5 blades optional for different wind speed areas, high wind energy utilization. Amazingly quiet operation with minimal vibration. Easy installation, tube or flange connection optional. New art of precision injection molding blades with aerodynamic shape and structure, high efficiency. Body of casting aluminum alloy, with 2 bearings swivel makes it stronger. Patented AC ...
-
Manufactured by Qingdao Renergy Equipment Co., Ltd.,based in CHINA
Technical parameter RW-5kW variable pitch wind turbine technical parameter RW-5kw variable pitch Technical parameters Wind rotor diameter (m) 5.4 Blade material and quantity Fiber glass reinforced * 3 Rated power / max power (w) 5k/6k Rated wind speed (m/s) 11 Rated rotating speed (rpm) 220 Working wind speed (m/s) 3-30 Startup wind speed (m/s) 2 Survived wind speed (m/s) 60 Working voltage (v) ...
-
Manufactured by Qingdao Renergy Equipment Co., Ltd.,based in CHINA
Technical parameter RW-10kW variable pitch wind turbine technical parameter RW-10kw variable pitch Technical parameters Wind rotor diameter (m) 7.6 Blade material and quantity Fiber glass reinforced * 3 Rated power / max power (w) 10k/12k Rated wind speed (m/s) 11 Rated rotating speed (rpm) 170 Working wind speed (m/s) 3-30 Startup wind speed (m/s) 2 Survived wind speed (m/s) 60 Working voltage ...
-
by WindCyclebased in HONG KONG
The Archimedes spiral wind turbine is a type of horizontal axis wind turbine HAWTs but unlike traditional HAWT that uses lift force generated by air pushed down by an Aerodynamic shape ( Airfoil), This turbine uses drag force to harness the energy from the wind. It consists of 3 blades three-dimensional conical shape. One of the key features of this turbine is that can start rotating at ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you