Medium Wind Power Equipment For Wind Energy In USA
-
Manufactured by The Switch - a Yaskawa Companybased in FINLAND
The most compact medium-speed solution available on the market today, FusionDrive®, utilizes the same frame for both the generator and gearbox. FusionDrive® is the result of bringing together the world-class wind power technology of Moventas, one of the industry’s leading wind gear manufacturers, and The Switch. The generator active parts are assembled directly around the secondary ...
-
Manufactured by The Switch - a Yaskawa Companybased in FINLAND
The Switch high-speed PMGs operate with a three-stage gearbox and feature a speed range between 1000 rpm and 2000 rpm. They offer an extremely small generator size and very high efficiency. As a stand-alone component, these PMGs can be used with many different turbine designs. Existing double-fed induction generators can be easily replaced with The Switch high-speed PMGs without requiring any ...
-
Manufactured by The Switch - a Yaskawa Companybased in FINLAND
The Switch low-speed, direct-drive PMGs operate without any gearbox and fast-rotating parts. The typical speed range is between 10 rpm and 20 rpm. The simple construction with fewer components lead to increased reliability and superior drive train efficiency. All generators can be designed with a segmented stator construction. This provides redundancy and makes it possible to repair the generator ...
-
Manufactured by The Switch - a Yaskawa Companybased in FINLAND
The Switch medium-speed PMGs operate with a single- or two-stage gearbox at a generator speed of typically between 100 rpm and 500 rpm. Combining the advantages of low- and high-speed technology, these PMGs offer extremely high availability and reliability, resulting in increased annual energy production ...
-
Manufactured by On-Site-Energy.combased in USA
The FANTURBINE Wind Generator converts wind energy into electrical energy. Runs Day & Night, Rain or Shine, capable of utilizing both very weak and very strong winds for maximum clean and renewable ...
-
Manufactured by Pecos Wind Powerbased in USA
The PW85 is an 85kW distributed wind turbine for behind-the-meter (onsite) and distribution-level (community-serving or community wind) power generation. Our design leverages an induction generator, a gearbox, and an extensive portfolio of commercially-off-the-shelf components for high reliability and serviceability. Pecos’ cost advantage is founded on two key advantages, optimization ...
-
based in USA
GE's 2.5 MW series wind turbine platform moves to a wider range of site applications by introducing the 2.85-100 and 2.85-103 wind turbines for increased customer value. GE's 50.2 meter proprietary blade design offers a 9%+ AEP increase over the 2.5-100. Focusing on performance, reliability, acoustic emissions, efficiency, and multi-generational product evolution, GE's 2.85-103 wind turbine ...
-
Manufactured by Planetary Systems, Inc.based in USA
Planetary Systems has limited our HAWT product line to two manufacturers for low and high power wind generators with two distinct operating scenarios. There are many Horizontal wind turbines available but we based our criteria on function, wind survivability and replacement parts availability and how easy they are to repair, rather than power output alone. The following are the best units ...
-
based in USA
HCI's ZPM is included in every HCI Hybrid Power Shelter and also available as stand-alone back-up power. Smart, battery-first technology. Ready for any grid type. No transfer switch – no single point of failure. Manages state-of-charge. Orchestrates and prioritizes energy sources. Autonomous operation. Operational visibility and control including monitoring of individual loads/tenants. ...
-
based in USA
Designed for IEC Wind Class IIIs, GE’s 2.75-120 wind turbine features a 120-meter rotor in combination with the proven single-blade pitch control. The 2.75-120 offers the latest enhancements in load management controls, low acoustic emissions, efficient electrical power conversion and robust ...
-
based in USA
GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 ...
-
Manufactured by Innoventum ABbased in SWEDEN
The Giraffe is designed to charge everything from electric vehicles to homes and houses with energy from both wind and sun. The solution consists of a wooden structure that holds 24 solar panels and a wind turbine that is mounted at a height of 12 m. The design was unveiled in 2014 at Asia’s largest design fair – Business of Design Week in Hong Kong. The Giraffe has many applicable ...
-
Manufactured by National Electric Coil (NEC)based in USA
National Electric Coil’s premier stator coil and bar design utilizes a proven, Class F, epoxy mica insulation system called NECCOBond-E. The NECCOBond line has been offered by NEC for many years, initially as a Class F polyester mica insulation system. However, in the last twenty years, NEC upgraded its design to a Class F epoxy system, hence the “E” in ...
-
Manufactured by Beacon Powerbased in USA
Beacon’s Power Control Module (PCM) is the “brains” of the flywheel storage system and provides the power and signal interfaces for each flywheel storage unit. The PCM allows stored energy to be coupled seamlessly to the grid, enabling instant response and maximum operational flexibility. Beacon can optimize flywheel installations to suit the unique characteristics of each ...
-
Manufactured by Planetary Systems, Inc.based in USA
Vertical Axis Wind Turbine (VAWT) with controller for mounting on 4″ sched-40 steel pipe at approx 7-10′ level about ground. The C-type wind generator employs planetary gear technology where every turn of the wind blades equals 3 turns of the generator rotor to produce high power at low rpm. Comments: Tower adaptor required for any pipe other than 4″ sched-40 steel. Add $295 ...
-
based in USA
For more than two decades Goldwind has been Innovating for a Brighter Tomorrow. The Goldwind 5S MW PMDD platform is part of that innovative future. The GW5S turbine – featuring rated capacities of 5.2 and 5.6 MW and a rotor diameter of 165 meters – is a direct evolution of Goldwind’s portfolio of wind turbine generators that offer best-in-class energy production, smarter ...
-
Distributed by African Energybased in USA
The Deka Solar series of valve-regulated, gelled-electrolyte batteries is designed to offer reliable, maintenance-free power for renewable energy applications where frequent deep cycles are required and minimum maintenance is desirable. Applications Water pumping, Residential, Communications Cathodic protection, Remote monitoring, Refrigeration Lighting, Aids to navigation, Wind ...
-
based in USA
GE’s 4.1-113 combines a proven design with GE’s unparalleled reliable technology to deliver the only built for purpose offshore wind turbine. The 4.1-113 is designed specifically for the offshore environment, with reliability and availability as the primary drivers. This machine includes direct-drive technology, built-in redundancy in the generator and converter, and in-situ repair ...
-
Manufactured by E- Novasolarbased in ITALY
The advanced charge controller WS-WSC15 is designed to receive power both by the wind generators and by the photovoltaic modules, has a scheme of operation defined as “hybrid”. The charge controller is specifically designed for small wind/solar combo systems . The word hybrid derives from the fact that the energy produced by sunlight and wind will be regulated and monitored by a CPU ...
-
Distributed by First Sunergy LLCbased in USA
Our company has been engaged in wind power generation for over 20 years and we made continuous updating relying on the practical experience for many years and in accordance with the characteristics of wind power generation. This system runs safely, stably and reliably with high work efficiency and long service life. Grid connection wind turbine controller can be manufactured by our company ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you