Offshore Wind Equipment For Wind Energy Available In Minnesota
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Spartan™ EMD, a standardized EMD, provides exceptional support throughout the equipment’s entire life cycle. Benefits include: Standardized Product Configurations. Pre-Engineered Package Design. Expanded Power Range. Comprehensive Lifecycle product ...
-
Manufactured by Hailo Wind Systems Gmbh & Co. Kgbased in GERMANY
The GLOBALlift+ – our rope-guided service lifts with state-of-the-art safety technology and many improved details. Prized and in use across the world. With the rope-guided GLOBALlift+, Hailo Wind Systems managed to meet its objective to produce a service lift that complies with the most discerning standards of quality and can be used in regions across the world, quickly and at an attractive ...
-
Manufactured by Aluwind A/Sbased in DENMARK
There are many unique challenges in each offshore project. They require a strong Enginnering Department. We have the in-house expertise and experience in cost effective production, manufacturing and assembly for a wide range of offshore wind industry ...
-
by SolarInsurebased in USA
The drive to reduce our dependents on fossil fuels and create a sustainable energy environment is growing. The importance of reducing carbon footprints and developing efficient, renewable energy resources is helping to quicken the development of renewable energy ...
-
based in USA
Alsym™ Energy is developing low-cost batteries for use in stationary storage and maritime shipping, followed by solutions for electric vehicles. Our proprietary technology avoids lithium and cobalt, taking advantage of readily available materials that are inherently non-flammable and non-toxic, reducing costs and increasing safety and sustainability. ...
-
Manufactured by Skylotec GmbHbased in GERMANY
With climbing protection eyelet. The new high-performance full body harness for industry and trade is uncomplicated and very easy to buckle on. The harness scores with extremely flexible adjustments of belt straps that are passed through the thin but effective hip padding. Due to its asymmetric shape, the padding ensures that the buckle does not exert any pressure in the abdominal area. Ergonomic ...
-
Manufactured by Carter Wind Energybased in USA
The wind turbine technology Carter has developed is most significant in that produces 4 times the energy per pound of equipment weight versus conventional wind turbine designs. The capital investment required to manufacture, transport, install, and maintain wind turbines, is a function of equipment weight. More energy with less equipment weight means a lower cost of ...
-
Manufactured by Transporter Industry International GmbHbased in FRANCE
On Site Transport (Construction, Industrial, Oil&Gas). Wind offshore Transport. Industrial. Shipyard. ...
-
Manufactured by SMD UKbased in UNITED KINGDOM
ARTEMIS LIVE: A PASSIVE TRACKING AND SURVEY TOOL USED ON LIVE AC OR UNIPOLAR DC CABLES THAT ARE POWERED. The Artemis sensors are set to look for 50/60 Hz or a harmonic from the live power transmission (residual in AC phase imbalance, or from AC-DC conversion). Unlike alternative technologies on the market, Artemis uses a model-based technique looking at the 3D magnetic field properties to ...
-
Manufactured by BFG Internationalbased in BAHRAIN
The Nacelle Cover is mounted on the bed plate of the turbine, it protects generator, gearbox and control system components. This makes the Nacelle Cover crucial part the protect wind ...
-
Manufactured by EEW Holding GmbH & Co. KGbased in GERMANY
Cones constitute a special feature in our production programme: centric and eccentric cones with various aperture angles and special edge processing, such as crimped edges. These cones are primarily used in the offshore construction industry as well as in mechanical engineering and pressure vessel ...
-
Manufactured by MME Groupbased in NETHERLANDS
Do you need to bridge a one meter gap between the quay and a small vessel? Or do you want to safely connect two offshore platforms across 50+ meters? Harbinger Boarding Equipment is the right solution to create a walkway for safe transfer of crew and passengers across any gap. Our standard systems are suitable for the majority of situations. For unique challenges, we can either modify an existing ...
-
Manufactured by Nantong Rainbow Offshore & Engineering equipment Co., Ltd.based in CHINA
Monopile is the most commonly used foundation type for offshore wind turbines in the world, and has been widely used in built offshore wind farm. Diameter of the monopile is 6~10m, and the length is about 100m. A large hydraulic pile hammer is used to drive monopile into the sea bed. The upper part of the monopile is connected with the tower by flange and bolt. Monopile is suitable for shallow ...
-
Manufactured by Gamesa Electricbased in SPAIN
With proven experience, working in wind, hydraulic and marine generator projects, Gamesa Electric designs and manufactures high-power magnet generators and motors, nowadays of up to 8 MW, for any number of revolutions. Permanent magnet machines (which allow polar windings, brushes, exciters and voltage regulation equipment to be omitted) eliminate the losses caused by excitation of the rotor ...
-
Manufactured by Sunforce Products Inc.based in CANADA
The Sunforce 600W Marine Turbine is capable of supplying power for: Refrigeration, auto-pilot, water maker, lights, navigational equipment, communication equipment & more!. Generate power day & night with the Sunforce 600W Marine Turbine! Designed to perform in low wind speeds, this unit charges both 12 Volt and 24 Volt battery banks. Ideal for salt and marine applications, this product ...
-
Manufactured by DAVI - Promau Groupbased in ITALY
'High Productivity Package' for Wind Tower And Off-Shore Foundations; The range of plate thicknesses used to manufacture the towers and foundations for the off-shore wind industry is increased significantly, compared to the on-shore towers, reaching over 140 mm (5.5”) for the foundations and 100 mm (4”) for the towers. To contain costs and ensure competitiveness, all phases of ...
-
Manufactured by XEMC Darwind BVbased in NETHERLANDS
The XD140 onshore 4MW turbine is derived from the offshore dedicated XD115 model. With a larger rotor diameter and designed for lower average wind speeds (compared to its predecessor), this turbine brings the benefits of the XD115 design to the onshore locations. The focus remains on fast installation and low maintenance. Hub heights can go from 100m up to ...
-
Manufactured by XEMC Darwind BVbased in NETHERLANDS
The XV90-2MW is at this time the smallest turbine in the Darwind product portfolio. The XV90 is a wind turbine with a nominal power of 2MW and a three bladed rotor with a diameter of 90 meters. The standard hub height is 80m and can be raised up to 140m. The sealed nacelle makes the XV90 very suitable for low wind onshore, near shore and desert ...
-
Manufactured by Fall Safebased in PORTUGAL
The unique Harken PowerSeat has revolutionised working at height in terms of comfort and efficiency. The best solution for completing a task on time is to ascend quickly, stay in position longer, and work in ...
-
Manufactured by CRP Subsea Ltd.based in UNITED KINGDOM
The Cable Protection Repair System (CPRS) can be deployed where an existing Cable protection System (CPS) has structurally failed resulting in an exposed cable or where the CPS has slipped from within the J-tube which will result in the cable being exposed. In both cases this leaves the cable unprotected against over-bending and wear in the aggressive subsea environment, causing further damage at ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you