Wind Energy Equipment In Canada
-
Manufactured by SunDanzerbased in USA
Save on costs with the SunDanzer 50 liter DC refrigerator or freezer. This 50 liter ultra efficient unit has exceptionally low energy consumption requiring smaller, less expensive power systems and low operating expense. High quality construction provides excellent reliability and long life. Super-insulated cabinets feature 11cm of polyurethane insulation with powdered-coated galvanized steel ...
-
Manufactured by Borrum Energy Solutions Inc.based in CANADA
The Anorra home wind turbine is designed to offset your electricity costs, reduce your carbon footprint, and survive the toughest of Canadian climates. Our design is 100% Canadian, and 85% of our parts are sourced in Canada. ...
-
Manufactured by Hydrostor Inc.based in CANADA
Hydrostor's proprietary Advanced Compressed Air Energy Storage (A-CAES) technology is the leading low-cost bulk energy storage solution. It addresses intermittent renewable generation (solar, wind), reserve capacity, peak shaving, and transmission and distribution deferral. Hydrostor offers a complete solution including financing and warranty through our strategic EPC ...
-
Manufactured by OutBack Power Technologies, Incbased in USA
OutBack Power's FLEXnet DC is the ultimate DC system monitoring device. Our integrated networked communications make valuable, usable data available from your system and viewable on an OutBack MATE communications device, providing you with the critical answers about your system's health, performance and ...
-
Manufactured by Opsun System Inc.based in CANADA
Our designers and engineers can create a tilted roof racking as you envision. Typical designs can be flush (0 deg. tilt), or tilted at 5 to 30 deg., landscape or portrait. Any common roof type. Structure can be one, two or even three layers to accommodate any construction type. ...
-
based in CANADA
Electricity from wind energy is one of the fastest growing methods of electrical generation in the world. Kinetic energy from moving air is converted into electricity by wind turbines that are mounted in locations where there are favourable weather patterns. Wind turbines may be employed individually, but are often installed in groups to form “wind farms” or “wind power ...
-
by Innergexbased in CANADA
Batteries are objects familiar to all, and utility-scale batteries used in energy storage systems are not much different from batteries we use in our every day lives, like in our cellphones or computers. Battery Energy Storage Systems charge and discharge energy at different times of the day, providing a service. Utility-scale batteries are stationary and connected to the grid, usually near a ...
-
Manufactured by RheEnergise Limitedbased in UNITED KINGDOM
At times of low energy demand, with associated low costs, the High-Density Fluid R-19 is pumped to the top storage tanks. The low-cost electricity is often provided by abundant renewable energy, such as wind and solar power. As energy prices rise the HD Fluid R-19 is released and it passes through the turbines, regenerating electricity to supply power to the grid. Because we use a high-tech fluid ...
-
based in CANADA
The Energy Ball V200 has a bigger diameter than the Energy Ball V100 and delivers substantially more power. The V20O has 5 rotor blades. With a diameter of almost 2 meters the Energy Ball V200 is suitable for installation in urban area's according to EU and North American legislation. Since the Energy Ball does not cause any nuisance due to noise or shadow, permits are generally granted faster ...
-
Manufactured by DeTect, Inc.based in USA
DeTect specializes in delivery, integration and support of advanced, proven bird monitoring systems for wind energy project developers, owners, operators and environmental consultants for bird and bat survey, mortality risk assessment, operational monitoring and real-time risk mitigation with over 250 systems delivered ...
-
based in USA
GE’s 2.5 MW product platform is evolving towards a wider range of site applications by introducing the 2.75-120 wind turbine designed for IEC Wind Class III environments. This new turbine features a 120-meter rotor in combination with the proven single-blade pitch control that offers the latest enhancements in load management controls, low acoustic emissions, efficient electrical power ...
-
Manufactured by American Hydrotech, Inc.based in USA
Hydroguard provides both insulation and lightweight ballasting for PMR assemblies. Composed of 2 ft. x 4 ft. Styrofoam™ panels topped with latex modified concrete and tongue and groove edges along the long sides allow each board to be interlocked during installation, creating a continuous layer of thermal protection. Hydroguard acts as a durable barrier, protecting the roofing membrane from ...
-
Manufactured by NovaLynx Corporationbased in USA
The 200-03002 Wind Sentry Anemometer and Vane are professional quality wind sensors which are suitable for a wide range of wind measurement applications. These moderately priced sensors are principally of thermoplastic construction providing excellent corrosion resistance, low sensor weight, and minimal parts count. In addition to being available as a set complete with crossarm, the sensors are ...
-
Manufactured by KI Canada Ltd.based in CANADA
Alternative EnergyHuman powered energy technology from K-TOR® is the new face of alternative energy. Complementing existing wind and solar technologies, K-TOR® generators deliver sustainable, green power whenever you need it — regardless of the circumstances.Emergency EssentialHuman powered generators can be used in the event of natural disasters, search and rescue missions, ...
-
based in USA
GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output at rated wind speed compared to the 1.85-87 turbine, ...
-
Manufactured by MidNite Solarbased in USA
The Classic 150 MPPT Charge Controller is MidNite Solar's most popular model. It has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 150 has a maximum output current of 96 amps, an operating voltage of 150 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics ...
-
Manufactured by Moventas Gears Oybased in FINLAND
Ensure reliability and availability with Moventas spare parts. Moventas sources and supplies gearbox spare parts worldwide for most common OEMs. Availability of parts, local inventories and quick response times lead to savings in your operations & maintenance structure. Maximize your uptime and revenue generation with Moventas spare ...
-
Manufactured by Triple Green Energybased in CANADA
Green Air Heat is a forced air biomass heating system that utilizes natural resources to create heat. This results in drier air, healthier poultry and increased profits for producers. Furnaces range in size from 100,000 – 4,000,000 BTU fully automated systems with auto ash removal. The refractory lined fire chamber can burn multiple biomass fuels with 50% fuel moisture including poultry ...
-
Manufactured by Swordfish Energy Corporationbased in CANADA
The revolutionary Swordfish Horizontal Axis turbine is an advanced hydrokinetic turbine design that has the potential to bend the carbon-emissions curve and become a key component in reaching global net-zero ...
-
Manufactured by Nomadic Systems Inc.based in CANADA
NOMADIC™ is now offering containerized Power Generators using diesel or propane. These generators are designed to to power the entire camp or just the potable water and sewage treatment system. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you