Wind Energy Equipment In Japan
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Everything needed for performing grounding & bonding tests in one convenient package. TRUST is an essential feature in any measurement tool and TEGAM’s new 700 Series bond meters and milli-ohmmeters are instruments you can rely on every day with confidence. These new models are designed with the clearest and most informative displays for mistake-free measurements. They quickly produce ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's Luxtron ThermAsset2 is designed to measure transformer winding hot spots in real time and activate control of the cooling system. Choice of two, four, six, or eight channels. Direct, accurate, and real-time transformer winding hot spot and temperature monitoring. Programmable setpoints and relays with individual LED alarm ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Superior accuracy, 100-hour battery life, and a 3-year warranty. TRUST is an essential feature in any measurement tool and TEGAM’s new 700 Series bond meters and milli-ohmmeters are instruments you can rely on every day with confidence. These new models are designed with the clearest and most informative displays for mistake-free measurements. They quickly produce accurate readings to ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
720A Intrinsically Safe Bond Meter, Test Probes & Accessories in One Convenient Package. TRUST is an essential feature in any measurement tool and TEGAM’s new 700 Series bond meters and milli-ohmmeters are instruments you can rely on every day with confidence. These new models are designed with the clearest and most informative displays for mistake-free measurements. They quickly ...
-
Manufactured by Nikkohm.Co.,Ltdbased in JAPAN
Features and Applications 35W high power resistors in TO263 (D2-PAK) style surface mount mold package with matte Tin plated flange. Non-inductive design suits high frequency applications and high-speed pulse circuits. Low, 3.3°C heat resistance from resistor hot spot to flange and long life performance are presented with thin film metallization technology. Wide, 10 milliohm to 51K Ohm ...
-
Manufactured by DEWESoftbased in SLOVENIA
The Dewesoft solution can measure all the power quality parameters according to IEC 61000-4-30 Class A. In comparison to other power quality analyzers it’s possible to do more detailed analysis (e.g. raw data storing, behavior at faults, calculation of additional parameters ...
-
Manufactured by Sumitomo Electric Industries, Ltd.based in JAPAN
Redox flow batteries are rechargeable batteries that are charged and discharged by means of the oxidation-reduction reaction of ions of vanadium or the like. They have excellent characteristics: a long service life with almost no degradation of electrodes and electrolytes, high safety due to being free of combustible materials, and availability of operation under normal temperatures. These make ...
-
Manufactured by BTS Biogasbased in ITALY
METANcontrol is a reliable control system that runs on independent systems including the programmable logic controller, an industrial PC, a visualization PC and the InfoModule. In case of failure of the industrial PC or the visualization PC, data backups info systems, and user interfaces continue to operate error-free. The innovative calculation program dinaMETAN ensures the optimal feed of the ...
-
Manufactured by Briggs & Stratton Corporationbased in USA
Power more household essentials – even a central air unit – and get your life back to normal during a power outage with our 10,000 watt Elite Series portable generator. It’s the most powerful portable generator in our line-up so it’s also great for serious do-it-yourself projects. It features our commercial-grade Vanguard V-Twin 18.0 Gross HP V-Twin engine, easy key ...
-
by InAccessbased in UNITED KINGDOM
A microgrid is a self-sustained system, consisting of interconnected distributed energy resources and loads under a common control scheme that can operate in an independent mode during grid failures. Energy resources may be renewables like solar and wind, diesel generators, gas turbines, battery storage, electric vehicles and/or demand/response. Microgrids may serve applications ...
-
Manufactured by WWS Wasserkraft GmbHbased in AUSTRIA
The Francis turbine – also know as “excess pressure turbine” – is usually installed for medium heads of water and constant water quantities. This type of turbine mostly uses a steel spiral turbine, since there is often a tube line leading to the turbine at heads of water over 20m. Further advantages of the compact design of the spiral turbine are much lower construction ...
-
by PJP Eye LTD.based in JAPAN
A 1kWh “power bank” can be fully charged in just 50 minutes. For example, a single 1kWh battery can use a 100W bulb for 10 hours (100W x 10 hours = 1000Wh = 1kWh, power consumption is 1kWh). We want to bring this “power bank” to countries without electricity. Portable “power bank” can be charged quickly by vending machine vendors with EV charging spot (normal ...
-
Manufactured by Tsubaki Nakashima Co,Ltd.based in JAPAN
As the world’s largest independent producer of tapered rollers, We manufactures rollers in a range of sizes, materials and profiles according to customer specification. Tapered rollers, typically found in automotive, wind, rail and industrial applications, carry both radial and axial loads and can carry higher loads than ball bearings due to the line contact between the roller and ...
-
based in JAPAN
Our inspection solution helps streamline blade maintenance operations for equipment at wind power plants. Blade inspections, which have traditionally been performed from the ground via visual inspections, can be digitized using our drone solution reducing the time spent on inspections while simultaneously improving the quality of blade ...
-
Manufactured by Nikkohm.Co.,Ltdbased in JAPAN
Features and Applications Very small size, low profile, right weight, TO252 style, SMD surge protection power film resistors. -55°C to +175°C temperature range provides for automotive applications. Low thermal resistance under 1.0 °C/W shows excellent cooling performance. Easy to replace TO252 D-PAK power resistor. Excellent rf characteristics advantage to high speed pulse operation. ...
-
Manufactured by TDK Corporationbased in JAPAN
The aluminum electrolytic capacitors with screw terminals feature solid terminals designed to carry high currents. Typically they are connected to the surrounding application by bus bars. Arrays of capacitors can be designed to form banks with a multiple of the rated voltage, capacitance and ripple current capabilities. Advanced series feature extremely compact dimensions, outstanding ripple ...
-
Manufactured by Intelligent Energy Limitedbased in UNITED KINGDOM
Designed around Intelligent Energy’s patented modular fuel cell architecture, the 305 fuel cell system provides our partners with an efficient and reliable solution to maintain their critical power systems 24/7. The Intelligent Energy 305 system utilises the latest hydrogen fuelled, proton exchange membrane (PEM) fuel cell technology and is scalable for immediate field ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Spartan™ EMD, a standardized EMD, provides exceptional support throughout the equipment’s entire life cycle. Benefits include: Standardized Product Configurations. Pre-Engineered Package Design. Expanded Power Range. Comprehensive Lifecycle product ...
-
Manufactured by RainWise Inc.based in USA
The PVMet 330 is a complete monitoring experience with our full range of sensors to optimize PV power generation. The PVMet 330 includes an option for both a Global and Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, a Wind Speed and Direction Sensor, a Relative Humidity Sensor, a Barometric Pressure Sensor, and a Rain Gauge ...
-
Manufactured by RainWise Inc.based in USA
The PVMet™ 500 delivers a customizable, multi-point monitoring solution that provides reliable energy management on any solar project. Choose up to three Irradiance Sensors and three Back-of-Panel Temperature Sensors along with three standard sensor options and an optional Ultra Sonic Anemometer, Mini Aervane, or Rain Gauge. Simple to install on any solar project, the PVMet 500 connects to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you