Wind Energy Equipment In Netherlands
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Spartan™ EMD, a standardized EMD, provides exceptional support throughout the equipment’s entire life cycle. Benefits include: Standardized Product Configurations. Pre-Engineered Package Design. Expanded Power Range. Comprehensive Lifecycle product ...
-
Manufactured by Seawind Ocean Technology Holding B.V.based in NETHERLANDS
Market-leading electricity and hydrogen technologies with higher performance, cost-efficiency, and sustainability. The Gamma 60 onshore two-bladed wind turbine (1.5 MW) has demonstrated the viability of Seawind’s patented technology (certified by DNV in December 2019). The next steps in the continuous validation of our technology is the construction of a Seawind 6.2 MW floating turbine to ...
-
Manufactured by HyTEPSbased in NETHERLANDS
EMC/EMI filters are used to limit electromagnetic disturbance to values below those established in standards, or reduce this to levels specified in EMC plans. This means electromagnetic disturbance in each component (device, product) has to remain within certain limits. In addition, it is important to consider the effect of external disturbances on the installation and components ...
-
Manufactured by Royal IHC Holland B.V.based in NETHERLANDS
We design and construct heavy-lift jack-up vessels for the offshore wind, and oil and gas markets. These self-elevating platforms can be delivered as a package or turnkey, according to customer ...
-
Manufactured by Van der Valk Solar Systems BVbased in NETHERLANDS
Foundation methods flat roof systems; The ValkPro+ L10 South or East-West and the ValkPro+ P10 South or East-West have different foundation methods. For example, the systems can be mounted using rubber tile carriers, mass blocks, or ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES50, with a rotor diameter of 20 meters, is specifically designed for areas with lower wind speed (class III). This two bladed wind turbine, with an new cover, is a reliable 50kW midsize wind turbine with a high performance. The mechanical part of the WES50 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest ...
-
Manufactured by Wind Energy Solutions BV (WES)based in NETHERLANDS
The WES100 is a two bladed, high performance, reliable 100 kW midsize wind turbine with a rotor diameter of 18 meters. This wind turbine is especially designed for areas with a higher wind speed. The mechanical part of the WES100 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest technology is used. WES100 turbines are ...
-
Manufactured by Protrafobased in NETHERLANDS
Our dry-type transformers consists of high quality resin insulation to ensure a long life. Our dry-type transformers are built to last, with advanced features and technologies that ensure maximum energy efficiency and minimal maintenance requirements. One of the key advantages of our dry-type transformers is their safety. They are free of oil and other flammable substances, which makes them less ...
-
Manufactured by VONKbased in NETHERLANDS
At VONK, we are continuously developing and advancing our renewable energy solutions. We have recently upgraded our plug and play containerised Hybrid Power System (HPS), making it even more compact, efficient and cost-effective. At the heart of our HPS 2.0 is our smart power management system, which finds the optimal balance between green power generation (solar, wind, wave), back-up generation, ...
-
based in NETHERLANDS
Bioenergy can always be considered as a form of renewable energy. Bioenergy, like solar energy, wind energy and hydro energy, originates from a renewable inexhaustible source. During their growth, plants and trees take CO2 from the air and with the conversion of biomass into electricity and heath, this CO2 is set free. By the utilization of vegetable material, no (extra) CO2 is added to the ...
-
Manufactured by ITO Navaidsbased in NETHERLANDS
The SPB 300 3 NM is both versatile and cost-effective. This three-mile LED beacon is compact, self-contained and available in red, green, amber, white and black. The light source is formed from high intensity LEDs. Light output can be set according to visibility. The beacon can be synchronised via the ITO sync GPS receiver and is designed to operate without servicing/maintenance for up to five ...
-
Manufactured by Royal IHC Holland B.V.based in NETHERLANDS
Our cable drum engine (CDE) is the result of many years of experience of servicing, upgrading and building multiple designs. Our standard CDE focuses on robustness and simplicity of design, which enables safe operation and low maintenance throughout its life cycle. It can also be enhanced to include additional customer- and vessel-specific ...
-
Manufactured by EWT Holdings N.V. / EWT B.V.based in NETHERLANDS
With a 54-metre rotor and a range of tower heights, the DIRECTWIND 54 is the ideal choice for distributed energy generation in low wind (IEC class IIIA) sites where planning permission and tip-height restrictions apply. Thanks to EWT’s continuous market-driven innovation, the DW54 delivers higher yields than similar-sized turbines in the same wind class. Meanwhile, our direct drive ...
-
Manufactured by Sifbased in NETHERLANDS
Compared to other options, monopile foundations are popular due to their low manufacturing costs, low transport and installation costs, and low risk profile due to their flawless track record. More than 80% of the wind turbines currently installed in the North Sea are based on monopile foundations. Sif has over 20 years of experience in the manufacturing of monopiles. Sif has constantly invested ...
-
Manufactured by BTG BioLiquids - BTG Biomass Technology Groupbased in NETHERLANDS
Our pyrolysis process converts up to 70 wt.% of the biomass feedstock into bio-oil and the remaining part into char and gas. Since 1993, BTG has played an active role in numerous projects on fast pyrolysis. BTG's unique and patented pyrolysis technology is characterised by an intense mixing without the need for an inert carrier gas. BTG-BTL’s has taken BTG's patented RCR (Rotating Cone ...
-
Manufactured by Lagerwey Wind BV & Lagerwey Systems BVbased in NETHERLANDS
With the LP4 platform Lagerwey introduces the ultimate onshore wind turbine generation. The LP4 platform is based on the successful LP2 platform with DDPM technology and advanced tower designs. The LP4 generation turbines are designed for various wind classes and can be built with the Lagerwey Climbing Crane. This makes Lagerwey wind turbines cost-efficient throughout the entire life ...
-
Manufactured by Twenco B.V.based in NETHERLANDS
Twenco weight terminal for static balancing of a wind turbine blade. Balancing in a set of 2 or 3 blades or equal to a group of blades. Available for any type of blades, from small up to MW class. Measured and calculated data can be stored in an archive on the local PC or transferred to a central server. Different blade types (diameter/length/contour) can be balanced on the same weight ...
-
Manufactured by Braden Groupbased in USA
The Innova anti-icing system prevents frost and ice formation on inlet components to protect the gas turbine, and prevent pressure drop buildup. Icing can damage blades, filter elements and other vital parts even in temperatures above freezing—ice crystals form at less than 40⁰F and greater than 50% relative ...
-
Manufactured by Protrafobased in NETHERLANDS
The robust construction of oil-filled transformers makes them suitable for the most extreme conditions; Introducing our state-of-the-art TIER2 ECODESIGN Oil-type Transformer, a testament to our commitment to sustainability and energy efficiency. Designed with the latest advancements in transformer technology, this cutting-edge solution sets new standards for environmental performance and ...
-
Manufactured by ITO Navaidsbased in NETHERLANDS
The AL 650 is suitable for lighting objects that cannot be easily located, such as offshore wind farms. The light source comes in two versions (100 or 30 degrees beam angle). The LEDs are powered by an automatic regulating current source with reverse polarity protection. LEDs and electronics are moulded in an epoxy compound. Light output can be factory set. The floodlight can be supplied with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you